Choosing the right wall heater for a bathroom requires balancing safety, humidity resistance, thermostat control, and installation type. The table below summarizes five wall heaters with built-in or integrated thermostats that fit common bathroom use cases. Each product section below includes images, listed features, and objective notes on suitability for bathroom environments.
| Product | Type | Thermostat | Power Options |
|---|---|---|---|
| Cadet Com-Pak CSC151TW | Electric Fan-Forced Wall Heater | Built-In Mechanical Thermostat | 120V, 1500W |
| Cadet Energy Plus CEC163TW | Electric Wall Heater With Digital Thermostat | Onboard Digital Thermostat | 240/208/120V, Multiple Wattages |
| Broan-NuTone White Grille Heater | Fan-Forced Wall Heater | Front-Mounted Adjustable Thermostat | 120/240V, 1000–2000W Configurable |
| Heat Storm HS-1500-PHX-WIFI | Infrared Wall Mounted Heater | Digital Touchscreen Thermostat + Wi‑Fi | 120V, 1500W |
| Broan-NuTone 9815WH | High Capacity Wall Heater | Front-Mounted Adjustable Thermostat | 120/240V, 1500W |
Content Navigation
- Cadet Com-Pak CSC151TW Wall Heater
- Cadet Energy Plus CEC163TW Heater
- Broan-NuTone White Grille Heater
- Heat Storm HS-1500-PHX-WIFI Infrared Heater
- Broan-NuTone 9815WH Wall Heater
- Buying Guide: Choosing A Bathroom Wall Heater With Thermostat
- 1. Safety Standards And Certifications
- 2. Thermostat Type And Control Precision
- 3. Heating Method: Fan-Forced Vs Infrared
- 4. Power, Coverage And Room Size
- 5. Installation Type And Location
- 6. Moisture And Corrosion Resistance
- 7. Noise And Fan Operation
- 8. Thermostat Accessibility And User Interface
- 9. Maintenance And Serviceability
- 10. Energy Efficiency And Operating Costs
- 11. Compatibility With Local Electrical Supply
- 12. Placement Relative To Ventilation
- Comparison Perspectives
Cadet Com-Pak CSC151TW Wall Heater
Type: Electric fan-forced recessed wall heater with thermostat. This Cadet Com-Pak model is a complete unit that includes the heater assembly and a built-in mechanical thermostat.
Listed Features: Model CSC151TW, 5120 BTU, 120 Volt, 1500 Watt, white finish. Designed as a complete unit for direct wall mounting and includes thermostat control for setpoint regulation.
Its 1500W output and compact Com-Pak form factor make it suitable for small bathroom spaces where a recessed wall heater is acceptable. The built-in thermostat provides basic temperature control. Verify local electrical codes and the bathroom zone requirements for wall-mounted heating devices before installation.
Cadet Energy Plus CEC163TW Heater
Call 888-896-7031 for Free Local HVAC Quotes – Compare and Save Today!
Type: Electric wall heater with integrated digital thermostat and push-button controls. Designed to replace older wall heaters using the same wall can footprint.
Listed Features: Onboard digital thermostat, simple push-button controls, large digital display, thermal safeguard protection, compatibility with Cadet Com-Pak wall cans. Multi-voltage capability: 5460/5120/3410 BTU; 240/208/120 Volt; 1600/1500/1000 Watt.
The digital thermostat allows tighter setpoint control than basic mechanical controls and simplifies user interaction. The thermal safeguard offers an automatic shutdown if temperatures exceed normal operating levels. The unit’s multi-voltage design provides flexibility for different wiring scenarios common in bathroom retrofits.
Broan-NuTone White Grille Heater
Type: Fan-forced wall heater with front-mounted adjustable thermostat designed for energy-saving supplementary heating.
Listed Features: Operates at 2000W/240V and can convert to 1000W at 240V, white grille with downflow louvers, one-piece baked enamel finish, housing dimensions provided, adjustable front-mounted thermostat.
Call 888-896-7031 for Free Local HVAC Quotes – Compare and Save Today!
The adjustable front thermostat allows room-level control without needing external controls. The downflow louvers direct warm air toward the floor, which can be beneficial for bathrooms where heat should stay low. Ensure the model’s power configuration and venting align with bathroom ventilation and electrical safety requirements.
Heat Storm HS-1500-PHX-WIFI Infrared Heater
Type: Infrared wall-mounted heater with touchscreen thermostat and Wi‑Fi control. Designed as a space-saving wall mount to preserve floor space.
Listed Features: Wi‑Fi enabled for phone control, tip-over safety shut off, touchscreen digital thermostat and remote, space-saving wall mount design, intended for bedrooms, kitchens, offices, and similar spaces.
Because it uses infrared heating rather than fan-forced convection, it may heat surfaces and occupants directly rather than quickly raising ambient air temperature. The digital thermostat and remote/Wi‑Fi control provide flexibility for setting temperature schedules or remote adjustments, which can be useful for maintaining comfort while managing energy use in bathrooms that are part-time occupied. Check manufacturer guidance for bathroom suitability and mounting height with respect to moisture exposure.
Broan-NuTone 9815WH Wall Heater
Type: High-capacity fan-forced electric wall heater with built-in adjustable thermostat and silent motor design.
Listed Features: 1500W operation at 120V (convertible to 240V), contemporary grille styling, permanently lubricated motor, adjustable front-mounted thermostat, overheat protection and silent operation claims.
The unit emphasizes continuous quiet operation and simple front-mounted thermostat control. Overheat protection supports safety in extended use. The permanently lubricated motor reduces maintenance requirements. Verify compatibility with bathroom wiring zones and manufacturer recommendations regarding placement relative to water sources.
Buying Guide: Choosing A Bathroom Wall Heater With Thermostat
Bathroom heating requires attention to safety, moisture resistance, sizing, control precision, and installation type. This buying guide outlines key considerations to evaluate when comparing wall heaters intended for bathroom use.
1. Safety Standards And Certifications
Confirm the heater carries applicable safety certifications for electric heating appliances. Look for overheat protection, thermal cutoffs, and any manufacturer notes about bathroom suitability. Local building codes may specify allowable devices in bathroom zones near showers and tubs.
2. Thermostat Type And Control Precision
Mechanical Thermostats: Simple, reliable, and typically integrated into many fan-forced units. Good for basic setpoint control.
Digital Thermostats/Wi‑Fi: Provide accurate temperature control, programmable schedules, remote adjustments, and often tighter temperature stability. Infrared models with digital thermostats may control surface temperatures rather than only ambient air.
3. Heating Method: Fan-Forced Vs Infrared
Fan-Forced Heaters: Move air to distribute heat quickly. Suitable for faster room warm-up and even distribution.
Infrared Heaters: Heat people and objects directly without relying on air circulation. They can feel warm faster to occupants but may not raise ambient air temperature as uniformly.
4. Power, Coverage And Room Size
Select wattage appropriate for the bathroom area. Typical 1500W units cover small to medium bathrooms. Consider insulation, ceiling height, and whether supplemental heating is needed. Multi-voltage units offer flexibility for different wiring scenarios.
5. Installation Type And Location
Decide between recessed vs surface wall mounting. Recessed (Com-Pak style) units have a compact look but require wall cavity depth. Check clearances from water sources, recommended mounting heights, and whether the device fits existing wall cans to minimize patchwork.
6. Moisture And Corrosion Resistance
Bathrooms are high-humidity environments. Verify the heater’s grille materials, finish, and any commentary on moisture tolerance. While many wall heaters are used in bathrooms, strict placement rules apply regarding locations near showers and tub edges.
7. Noise And Fan Operation
If quiet operation is a priority for a bathroom adjacent to bedrooms, look for units with permanently lubricated or silent motors. Infrared heaters offer silent operation since they lack a fan, but consider trade-offs in distribution.
8. Thermostat Accessibility And User Interface
Front-mounted thermostats allow immediate manual adjustments without accessing complex controls. Digital displays, touchscreens, or Wi‑Fi enable scheduling and remote control for energy management.
9. Maintenance And Serviceability
Check for easily replaceable parts, motor lubrication requirements, and availability of replacement grilles or elements. Units designed to reuse existing wall cans reduce installation time for replacements.
10. Energy Efficiency And Operating Costs
Compare thermostat precision, programmable schedules, and heating method. Digital thermostats and Wi‑Fi scheduling can reduce run time and energy use. Infrared operation can feel efficient for short use periods but may differ in measured energy consumption.
11. Compatibility With Local Electrical Supply
Confirm voltage and wattage configurations match the bathroom’s circuit. Some units offer multi-voltage configurations (120/208/240V) while others are factory-wired for a single voltage. Always follow electrical code and consider professional installation for hardwired heaters.
12. Placement Relative To Ventilation
Ensure the heater installation does not obstruct bathroom ventilation or interfere with exhaust fans. Proper ventilation reduces moisture exposure and improves overall heater performance.
Tips for Getting the Best HVAC Prices
- Prioritize Quality Over Cost
The most critical factor in any HVAC project is the quality of the installation. Don’t compromise on contractor expertise just to save money. - Check for Rebates
Always research current rebates and incentives — they can significantly reduce your overall cost. - Compare Multiple Quotes
Request at least three estimates before making your choice. You can click here to get three free quotes from local professionals. These quotes include available rebates and tax credits and automatically exclude unqualified contractors. - Negotiate Smartly
Once you've chosen a contractor, use the proven strategies from our guide — How Homeowners Can Negotiate with HVAC Dealers — to get the best possible final price.
Comparison Perspectives
- Safety Focus: Choose units with thermal safeguards, overheat protection, and explicit manufacturer guidance for bathroom environments.
- Control Focus: For precise temperature control and scheduling, prioritize digital thermostats or Wi‑Fi-enabled models.
- Quiet Operation: For minimal noise, evaluate infrared units or models advertised with silent/quiet motors.
- Installation Ease: If replacing an existing wall heater, consider units compatible with the same wall can to reduce wall repairs.