Quick Overview: Choosing the right kerosene heater filter improves combustion efficiency, reduces clogging, and extends heater life. Below is a concise comparison table of the five selected replacement filters and kits most relevant to common kerosene forced-air and low-pressure oil-fired heaters.
| Product | Compatible Brands/Models | Type |
|---|---|---|
| Huarntwo Replacement PP213 HA3014 Air Filter Kit | Desa Reddy, Remington, Master (low-pressure ≤70k BTU) | Air/Heater Filter Kit (multi-part) |
| Irnyso Replacement Fuel Filter 70-003-0200 (Set of 2) | Remington, ProTemp, SunStream, Stanley, Pinnacle (120–220k BTU) | Inline Fuel Filter |
| Irnyso Replacement Fuel Filter 70-003-1000 (Set of 2) | Remington, ProTemp, SunStream, Stanley, Mi-T-M (150–220k BTU Silent Drive) | Inline Fuel Filter |
| HAKATOP SP-KFA1005 70-054-0200 Air Filter Kit | Dyna-Glo, Dura-Heat, Dyna-Pro, Thermoheat, WorkHorse | Air Filter Kit (replacement part numbers) |
| Mr. Heater Filter Kit For 2009 Or Newer Kerosene Forced Air Heater | Mr. Heater MHxxKTR series & Contractor series (2009+ models) | Manufacturer Filter Kit |
Content Navigation
- Huarntwo New Replacement PP213 HA3014 Air Filter Kit
- Irnyso Replacement Kerosene Heater Fuel Filter 70-003-0200 (Set Of 2)
- Irnyso Replacement Kerosene Heater Fuel Filter 70-003-1000 (Set Of 2)
- HAKATOP SP-KFA1005 70-054-0200 Kerosene Heater Air Filter Kit
- Mr. Heater Filter Kit For 2009 Or Newer Kerosene Forced Air Heater
- Buying Guide — How To Choose The Right Kerosene Heater Filter
Huarntwo New Replacement PP213 HA3014 Air Filter Kit
This Huarntwo filter kit is specified for low-pressure oil-fired heaters made by Desa and compatible with Reddy, Remington, and Master models rated 70k BTU or smaller. The kit includes M29632, M29633, and M29612-01 filters which cover multiple filtration points commonly required during maintenance.
Key features referenced by the supplier include explicit compatibility with the PP213 or HA3014 replacement numbers and inclusion of the three named filters. The multi-component kit addresses air and particulate filtration stages needed for these older low-pressure combustion systems.
Use cases: routine maintenance on Desa-style low-pressure heaters where all three filter parts are recommended. The kit approach reduces the chance of missing a required element during a scheduled service interval.
Irnyso Replacement Kerosene Heater Fuel Filter 70-003-0200 (Set Of 2)
Call 888-896-7031 for Free Local HVAC Quotes – Compare and Save Today!
The Irnyso 70-003-0200 replacement fuel filters are intended for 120–220k BTU kerosene heaters and measure about 7.5 inches in length. The listing highlights compatibility with brands such as HeatStream, Stanley, Dayton, ProTemp, Remington, DuraHeat, Master, SunStream, and Mi-T-M.
These inline fuel filters are designed to remove impurities and particulates from kerosene before reaching the pump and nozzle assembly, reducing the likelihood of burner malfunctions and poor combustion. The set-of-two format is appropriate for replacing filters on multiple heaters or keeping a spare for the next service interval.
Installation context: typical inline placement on fuel lines feeding the heater’s pump. Check model-specific service manuals for correct orientation and mounting to avoid flow restriction or air entry into the fuel system.
Irnyso Replacement Kerosene Heater Fuel Filter 70-003-1000 (Set Of 2)
The Irnyso 70-003-1000 fuel filter targets 150–220k BTU heaters and the Silent Drive series. The product description emphasizes durable construction and good filtration performance for maintaining efficient heater operation.
Compatibility is listed for models such as 150T-SDR, 150T-DFV, 220T-SDR, 220T-DFV and common brands including Remington, ProTemp, Sunstream, Stanley, and Mi-T-M. The filter length and form factor are crafted to align with OEM fuel lines used on these higher-capacity units.
Call 888-896-7031 for Free Local HVAC Quotes – Compare and Save Today!
Technical role: the filter reduces sediment and contaminants that can clog fuel pumps or nozzles. For heaters that use a Silent Drive pump or similar assembly, adopting the correct filter spec helps preserve pump longevity and maintain steady fuel delivery.
HAKATOP SP-KFA1005 70-054-0200 Kerosene Heater Air Filter Kit
The HAKATOP KFA1005 kit replaces OEM part numbers including 70-054-0200 and 572227 and is designed for Dyna-Glo, Dura-Heat, Dyna-Pro, Thermoheat, and WorkHorse heater models. The kit is tailored to replace specific air filter elements required for those families of forced-air kerosene heaters.
This kit addresses air intake filtration, which is critical for preventing dust and debris from entering the combustion chamber and blower assembly. Proper air filtration helps maintain consistent airflow, supports efficient combustion, and can limit soot buildup on heat exchanger surfaces.
When selecting this kit, confirm model numbers listed in your heater’s service literature. Using the correct part numbers reduces fitment issues and ensures that mounting holes, gasket surfaces, and flow area match OEM expectations.
Mr. Heater Filter Kit For 2009 Or Newer Kerosene Forced Air Heater
The Mr. Heater filter kit is formulated for 2009 or newer models across the MH and Contractor series (MH50KTR, MH75KTR, MH125KTR, MH175KTR, MH210KTR and Contractor/Contractor Plus equivalents). It is a manufacturer-specific kit matching OEM filtration items for those forced-air models.
Manufacturer replacement kits typically assure correct fit, proper filtration area, and parts that align with the heater’s installed components and service intervals. This kit is useful for owners of Mr. Heater contractor-style units who require exact OEM compatibility.
OEM kits may include seals or gaskets in addition to filter media; verify the kit contents for a complete maintenance cycle to avoid missing secondary parts that affect performance or safety.
Buying Guide — How To Choose The Right Kerosene Heater Filter
Choosing the correct filter requires matching type, size, and compatibility to your heater model and intended performance goals. Below are key considerations grouped by functional perspective to help you decide.
Compatibility And Fit
- Model Numbers: Always check the heater’s model and serial numbers against the filter part numbers or manufacturer cross-reference list.
- OEM vs. Aftermarket: OEM kits often ensure fit and include gaskets; aftermarket parts can offer cost savings or wider availability but verify dimensions and connector types.
- Physical Dimensions: Length and diameter for inline fuel filters, and overall face size and thickness for air filters, determine correct fit.
Filtration Function — Fuel Vs. Air
- Fuel Filters: Designed to remove particulates, water, and sludge from kerosene. Inline filters should maintain flow rate while preventing nozzle clogging. For pumps with fine tolerances, choose filters rated for the manufacturer-recommended micron level when available.
- Air Filters: Keep dust and lint out of the combustion chamber and blower. Clean or replace air filters on a schedule to avoid restricted airflow that causes poor combustion or increased soot.
Material And Construction
- Filter Media: Pleated paper, foam, or sintered metal are common. Paper pleats balance cost and surface area; foam can be washable in some designs but confirm compatibility with kerosene exposure.
- End Caps And Housings: Durable plastic or metal end caps and secure sealing surfaces prevent unfiltered bypass and resist degradation from fuel exposure.
Heater Capacity And Flow Requirements
- BTU Rating: Match filter specifications to the heater’s BTU class. Higher BTU units often require larger flow capacity and may use different filter part numbers.
- Pump Type: Heaters with Silent Drive or high-pressure pumps can be sensitive to flow restriction. Filters must permit rated flow at normal pump pressures.
Service Intervals And Maintenance
- Replace On Schedule: Follow the heater manufacturer’s filter replacement interval or inspect every fuel/season cycle.
- Keep Spares: Buying filters in sets-of-two or kits ensures availability when a filter is fouled and avoids downtime in cold conditions when heaters are needed.
Safety And Installation Considerations
- Correct Orientation: Install inline fuel filters with the proper flow direction to prevent air locks or fuel starvation.
- Sealing And Clamps: Use appropriate hose clamps and inspect for leaks after installation. A loose connection allows air into the pump and can cause hard starting or surging.
- Fuel Compatibility: Ensure filters are designed for kerosene or the specified fuel; some materials degrade with certain additives.
Performance Trade-Offs And Comparison Perspectives
- OEM Kits vs Multi-Part Kits: OEM kits (like Mr. Heater) maximize fit and may include gaskets. Multi-part aftermarket kits (Huarntwo, HAKATOP) can consolidate several service items into one purchase, reducing the risk of missing components during maintenance.
- Universal Inline Filters vs Model-Specific Filters: Universal items may fit many heaters but require careful dimension checks. Model-specific filters eliminate guesswork if the part number matches the heater manual.
- Durability vs Flow: Denser filter media can capture finer particles but may restrict flow under high-demand conditions. Select a filter rated for both particle retention and required flow for your heater’s BTU class.
Practical Tips For Selection And Use
- Consult The Manual: The heater’s service manual should list replacement part numbers and recommended service intervals for both air and fuel filters.
- Measure Before Buying: If part numbers are unavailable, measure the existing filter length, diameter, and inlet/outlet fittings to confirm compatibility.
- Buy Kits For Full Service: When performing a seasonal tune-up, kits that include multiple filters and gaskets simplify maintenance and reduce the chance of missing components.
- Record Install Dates: Note replacement dates to maintain a predictable maintenance schedule and anticipate future purchases.
Choosing the right kerosene heater filter requires balancing compatibility, flow capacity, and filtration efficiency. Cross-referencing part numbers, confirming physical dimensions, and considering OEM vs aftermarket options will help ensure reliable heater operation and safer combustion performance.
Tips for Getting the Best HVAC Prices
- Prioritize Quality Over Cost
The most critical factor in any HVAC project is the quality of the installation. Don’t compromise on contractor expertise just to save money. - Check for Rebates
Always research current rebates and incentives — they can significantly reduce your overall cost. - Compare Multiple Quotes
Request at least three estimates before making your choice. You can click here to get three free quotes from local professionals. These quotes include available rebates and tax credits and automatically exclude unqualified contractors. - Negotiate Smartly
Once you've chosen a contractor, use the proven strategies from our guide — How Homeowners Can Negotiate with HVAC Dealers — to get the best possible final price.