Stove pipe heaters boost home heating efficiency by reclaiming heat from chimney or stovepipe surfaces and redistributing it into living spaces. Below is a quick comparison table of selected products that fit different installation styles and needs.
| Product | Type | Primary Benefit |
|---|---|---|
| HY-C MH-6R Magic Heat Bottom Crimp Heat Reclaimer | Heat Reclaimer (UL Listed) | Highest documented reclaim rate; built-in soot scraper |
| 6 Stovepipe Heat Reclaimer/Radiator Rings (Detex) | Radiator Rings | Modular rings that capture and radiate pipe heat |
| PYBBO Heat Powered Wood Chimney Stove Fan | Thermoelectric Fan | Active circulation of warmed air without power |
| Heat Fab Black Stove Pipe – 22 Gauge | Replacement/Stove Pipe Section | Durable steel pipe with high-temp paint for longevity |
| FIREHIKING Stove Pipe Wrap (Basalt Fiber) | Pipe Wrap / Protector | Scald protection and heat shielding for tents/cabins |
Content Navigation
- HY-C MH-6R Magic Heat Bottom Crimp Heat Reclaimer
- 6 Stovepipe Heat Reclaimer/Radiator Rings (Detex)
- PYBBO Heat Powered Wood Chimney Stove Fan
- Heat Fab Black Stove Pipe – 22 Gauge – 6″x36″
- FIREHIKING Stove Pipe Wrap Heat-Resistant Protector
- Buying Guide: How To Choose The Right Stove Pipe Heater Or Accessory
HY-C MH-6R Magic Heat Bottom Crimp Heat Reclaimer
The HY-C MH-6R is marketed as the only UL Listed heat reclaimer for single-wall chimney applications. It is designed to fit 6″ flue diameter pipes and claims to reclaim up to 30% of heat that would otherwise escape up the chimney.
- Key Features: UL listing, up to 30% heat reclaim, fits 6″ single-wall pipe, built-in soot scraper, crimp-down configuration for high flue temperatures.
- Installation: Crimp-down design requires proper seating on the pipe; intended for wood-burning appliances with flue temps exceeding 350°F while keeping the unit below recommended surface temperatures.
- Performance Notes: Built-in soot scraper facilitates tube cleaning to maintain thermal transfer efficiency. UL listing indicates third-party safety testing specific to listed conditions.
6 Stovepipe Heat Reclaimer/Radiator Rings (Detex)
Detex offers a pack of radiator rings/bands designed to capture heat from a 6″ diameter stovepipe. These collars are thin aluminum with high thermal conductivity intended to increase surface area and transfer heat into the room.
- Key Features: Fits approximately 19″ circumference (6″ diameter), 28-gauge aluminum, 1.5″ wide bands, designed to reclaim wasted pipe heat.
- Installation: Slip rings over the pipe and space them as desired. Lightweight aluminum aids heat conduction but requires proper fit to maximize contact area.
- Performance Notes: Aluminum construction offers quick heat conduction; effectiveness scales with number of rings and pipe temperature. These rings are modular and can be combined for larger sections of pipe.
PYBBO Heat Powered Wood Chimney Stove Fan
Call 888-896-7031 for Free Local HVAC Quotes – Compare and Save Today!
The PYBBO stove fan uses a thermoelectric module to generate electricity from the temperature difference between the fan base and the top of the unit, powering blades to circulate warm air without external power.
- Key Features: Mounts on chimney pipe, five-blade anodized aluminum design, silent operation (claimed noise below 32 dB), magnetic thermometer included for monitoring.
- Installation: Designed for mounting on uneven surfaces and fixed to the pipe. No batteries or wiring required—operation depends on sufficient temperature differential.
- Performance Notes: Active circulation distributes warmed air more evenly and can reduce fuel consumption by improving convective heat transfer. Performance depends on pipe surface temperature and base contact.
Heat Fab Black Stove Pipe – 22 Gauge – 6″x36″
Heat Fab supplies a 22-gauge cold-rolled steel stove pipe section painted with high-temperature silicone-based stove paint. This is a replacement pipe piece often used during stove installations or repairs.
- Key Features: 22-gauge steel construction, high temperature silicone-based stove paint, designed to prevent smoke or fuel leakage when properly assembled.
- Installation: Intended as a pipe section (6″x36″) compatible with matching 6″ stovepipe systems. Proper sealing and support are required to maintain safe operation.
- Performance Notes: Durable material and high-temp paint help maintain appearance and corrosion resistance. A solid pipe section supports heat transfer characteristics similar to other steel stovepipes.
FIREHIKING Stove Pipe Wrap Heat-Resistant Protector
FIREHIKING offers a basalt fiber-based stove pipe wrap aimed at scald protection and heat shielding for tent stoves, camping stoves, or temporary installations. The wrap includes adjustable clamps to secure it around pipes.
- Key Features: Basalt fiber material for high-temperature resistance and flame retardancy, adjustable clamp design for 65–89mm pipe diameters, protects against scalding and provides thermal shielding.
- Installation: Wrap around the pipe and secure with the provided adjustable clamps. Suitable where insulation or a protective barrier is required, notably in close-quarter or tent applications.
- Performance Notes: Best used where surface protection or reduced radiant heat is the priority rather than reclaiming heat into the room. Basalt fiber offers durable high-temperature stability.
Buying Guide: How To Choose The Right Stove Pipe Heater Or Accessory
Choosing the right stove pipe heater depends on objectives: reclaiming lost heat for room warmth, improving air circulation, adding protective insulation, or replacing corroded pipe sections. Below are key considerations.
Call 888-896-7031 for Free Local HVAC Quotes – Compare and Save Today!
Heat Recovery Method
Passive Reclaimers: Units like the HY-C Magic Heat and Detex rings increase surface area and conduct heat from the pipe into the room. They work without moving parts and are low maintenance.
Active Devices: Thermoelectric fans (e.g., PYBBO) use the temperature differential to power a fan and actively circulate warm air. They can improve comfort distribution but require sufficient pipe temperature to operate.
Safety And Certification
Look for third-party listings
Material And Durability
Materials matter: Aluminumsteel
Compatibility And Fit
Measure stovepipe diameter and circumference accurately. Products specify fit (e.g., 6″ flue, 19″ circumference). Reclaimers and fans must closely contact the pipe for best performance. Adjustable clamps or modular rings offer flexibility across pipe sizes.
Installation And Maintenance
Consider installation complexity. Crimp-down reclaimers may require more careful seating; rings and wraps are simpler. Built-in soot scrapers or removable components simplify maintenance. Regular inspection prevents creosote buildup and maintains thermal transfer.
Performance Metrics
Manufacturers sometimes quote reclaimed heat percentages; treat these as indicative. Performance depends on flue temperature, airflow up the chimney, pipe material, and room layout. Active fans improve circulation but are limited by available temperature differential.
Intended Use Case
Match product to need:
- If You Want Maximum Room Heat: Large surface-area reclaimers or combining rings with a fan can increase effective heat distribution.
- If You Need Air Circulation: Thermoelectric fans move warm air and can reduce cold spots.
- If You Need Protection/Insulation: Wraps and shields reduce surface temperature and protect tents or nearby fabric.
- If You Need Replacement Pipe: Choose rated, painted steel pipe sections sized to your system with correct clearances.
Comparison Perspectives
Energy Efficiency: Passive reclaimers recover static heat; combined solutions (reclaimer + fan) often yield better real-world comfort and potential wood savings.
Noise And User Comfort: Fans generate some noise—check decibel ratings. Passive devices are silent.
Longevity And Maintenance: Steel pipes and painted finishes resist corrosion; fiber wraps resist high temps but may degrade over time. Consider ease of cleaning for soot-prone systems.
Budget And Value
Balance upfront cost, expected efficiency gains, and installation complexity. Simpler rings or wraps are low-cost upgrades; UL-listed reclaimers and thermoelectric fans may offer greater documented benefits for longer-term savings in fuel use.
Tips for Getting the Best HVAC Prices
- Prioritize Quality Over Cost
The most critical factor in any HVAC project is the quality of the installation. Don’t compromise on contractor expertise just to save money. - Check for Rebates
Always research current rebates and incentives — they can significantly reduce your overall cost. - Compare Multiple Quotes
Request at least three estimates before making your choice. You can click here to get three free quotes from local professionals. These quotes include available rebates and tax credits and automatically exclude unqualified contractors. - Negotiate Smartly
Once you've chosen a contractor, use the proven strategies from our guide — How Homeowners Can Negotiate with HVAC Dealers — to get the best possible final price.
Installation Safety Tips
- Verify clearances to combustibles after adding any external device.
- Ensure proper pipe support and secure mounting to avoid shifting or contact with combustibles.
- Inspect for creosote regularly; some reclaimer designs help with internal cleaning while others require manual maintenance.