Choosing the right electric jobsite heater affects safety, comfort, and productivity on cold work sites. This guide reviews five proven electric heaters suitable for garages, workshops, and jobsites, comparing power, mounting options, portability, and safety features.
| Product | Type | Power / Output | Key Feature |
|---|---|---|---|
| Remington 1500W Portable Heater (REM-222A-120) | Portable Space Heater | 1500W (Heats ~165 sq ft) | Adjustable Thermostat, Two Heat Settings |
| Remington Adjustable Portable Heater (REM-300A-120-B) | Portable Space Heater | 1500W / 12.5A | Whisper Quiet Fan, Thermostat |
| Comfort Zone Ceiling Mount Garage Heater (CZ220BK) | Hard-Wired Ceiling Heater | 5,000W / 240V | Ceiling-Mount, Louvers, Heavy-Gauge Steel |
| Dura Heat Forced Air Heater EUH1465 | Portable Forced-Air Heater | 1500W / 5,120 BTU | PTC Ceramic Element, Pivoting Base |
| Riseon Outdoor 1500W Electric Heater | Portable Outdoor/Indoor Heater | 1500W | Remote Thermostat, 3 Modes, Safety Features |
Content Navigation
- Remington 1500W Heavy-Duty Electric Heater
- Remington Adjustable Portable Electric Heater
- Comfort Zone Ceiling Mount Garage Heater
- Dura Heat Forced Air Heater With Pivoting Base
- Riseon Outdoor 1500W Electric Garage Heater
- Buying Guide: Choosing An Electric Jobsite Heater
- Space Size And Heat Output
- Power Source And Electrical Considerations
- Mounting: Portable Vs. Hard-Wired
- Heat Delivery And Distribution
- Safety Features
- Durability And Construction
- Noise Levels
- Controls And Convenience
- Placement And Airflow Considerations
- Energy Efficiency And Operating Cost
- Comparison Perspectives
Remington 1500W Heavy-Duty Electric Heater
The Remington 1500W Heavy-Duty Electric Heater (REM-222A-120) is built for small workspaces like garages and jobsite trailers. Its 1500-watt output is rated to heat about 165 square feet, making it suitable for single-bay garages or compact workshops.
Key features include two heat settings with an adjustable thermostat to control room temperature and an emphasis on rapid heat-up so the unit generates warm air within seconds. The design targets portability and straightforward controls for jobsite use.
Safety and usability considerations: the unit’s compact footprint is useful where floor space is limited. For extended jobsite operation verify outlet capacity and breaker limits, and use grounded outlets or GFCI-protected circuits as required.
Remington Adjustable Portable Electric Heater
Call 888-896-7031 for Free Local HVAC Quotes – Compare and Save Today!
The Remington REM-300A-120-B combines 1500W output with an emphasis on quiet operation. The balanced fan is designed to push warm air into the space without high noise levels, useful in occupied jobsite trailers or workshops where hearing protection may already be in use.
Features listed include two heat settings, an adjustable thermostat, and a 1500W / 12.5A rating suitable for standard 120V circuits. The unit aims to balance power and acoustic performance for repeated daily use.
Operational notes: prioritize placement where the fan can circulate air unobstructed. For longer runs, check that extension cords are rated for 15A and low voltage drop to avoid reduced performance or nuisance trips.
Comfort Zone Ceiling Mount Garage Heater
The Comfort Zone CZ220BK is a hard-wired, ceiling-mounted heater delivering 5,000 watts on a 240V supply, aimed at larger garage bays, workshops, and commercial areas where floor space must be preserved.
Construction is heavy-gauge steel for durability in harsh conditions. The unit includes louvers and an adjustable mounting angle for targeted heat distribution and has a fan-forced design to move air across the element for consistent coverage.
Call 888-896-7031 for Free Local HVAC Quotes – Compare and Save Today!
Installation and safety: this model requires hard-wiring and should be installed by a qualified electrician to meet local code. Ceiling mounting reduces trip hazards and keeps the heater away from combustible materials, but verify clearances and structural support before mounting.
Dura Heat Forced Air Heater With Pivoting Base
The Dura Heat EUH1465 is a compact forced-air heater with a pivoting base and a 1500W PTC ceramic heating element designed for quick warmth in small work areas. Its steel construction suits rugged environments such as garages and workshops.
Key selling points include forced-air operation for faster distribution, a pivoting base to direct airflow, and selectable heat and fan-only modes for year-round utility as either a heater or air circulator.
Practical notes: the pivoting base helps aim heat directly where needed, which is useful for spot-heating workstations. Check stability and keep the unit on level, non-combustible surfaces to meet safety guidelines.
Riseon Outdoor 1500W Electric Garage Heater
The Riseon 1500W outdoor heater targets versatile scenarios like patios, greenhouses, and jobsite tents while also functioning as an indoor garage heater. It uses a PTC ceramic element and lists 3 modes including ECO, Low, and High settings.
Controls include touch and remote control, and the unit is highlighted for overheat protection, a child lock, and anti-tip bracing. The thermostat control cycles heating based on setpoint, which conserves energy by pausing when the space reaches the target temperature.
Use considerations: the remote and timed modes add convenience for intermittent jobsite heating. Verify intended indoor or outdoor placement and wiring recommendations to maintain listed safety certifications and weather protection.
Buying Guide: Choosing An Electric Jobsite Heater
Selecting the correct jobsite heater depends on space size, mounting preference, power availability, required portability, and safety features. This guide covers the essential factors to weigh when comparing models.
Space Size And Heat Output
Match heater capacity to the space. For small workshops or trailers up to ~165 sq ft, a 1500W unit often suffices. For larger single-bay garages or commercial areas, consider higher wattage or hard-wired 240V units rated in the multiple kilowatts.
Power Source And Electrical Considerations
Confirm available supply: 120V portable units are most common but limited to ~1500W on typical circuits. 240V hard-wired units deliver much higher output and require professional installation. Never overload extension cords; use heavy-gauge, properly rated cords when permitted.
Mounting: Portable Vs. Hard-Wired
Portable heaters provide mobility and fast deployment but occupy floor space and depend on outlet availability. Ceiling-mounted or hard-wired heaters free floor space and offer higher outputs but need permanent installation and wiring upgrades.
Heat Delivery And Distribution
Forced-air (fan) heaters move warm air quickly and are effective for spot heating or filling a space. Convection-only models are quieter but slower. Adjustable louvers, pivoting bases, and fan speeds affect how evenly heat spreads across work areas.
Safety Features
Prioritize models with overheat protection, thermal cut-out switches, tip-over shutoffs (for portable units), and ETL/UL listings. In dusty or combustible environments, keep heaters away from flammable materials and follow clearance recommendations.
Durability And Construction
Jobsite conditions demand rugged construction. Look for steel housings, reinforced grills, and impact-resistant designs. Units intended for garages should tolerate temperature swings and occasional knocks.
Noise Levels
Noise can affect communication and concentration. If the heater will operate near occupied workstations, opt for models marketed as whisper-quiet or with balanced fans to reduce audible distraction.
Controls And Convenience
Thermostatic control, remote control, timers, and multiple heating modes increase usability. Programmable thermostats help maintain set temperatures and reduce energy waste on long jobsites.
Placement And Airflow Considerations
Place heaters where they can circulate air without obstruction. For forced-air units, maintain clear inlet and outlet zones. Ceiling mounts should be anchored to structural supports and positioned to aim heat toward work zones.
Energy Efficiency And Operating Cost
Electric heaters convert nearly all input power to heat, but operating cost scales with wattage and run time. Use thermostatic controls and ECO or cycling modes to limit runtime while preserving comfort.
Comparison Perspectives
- Portability vs. Output: 1500W portable models are versatile and easy to move but limited in coverage; hard-wired 240V units provide more heat for larger spaces.
- Spot Heating vs. Whole-Space Heating: Use forced-air portable heaters for directed, fast spot heating. Use ceiling or larger units for evenly heating an entire bay.
- Safety vs. Convenience: Portable plug-in heaters are convenient but require careful electrical planning; hard-wired heaters reduce cord risks but require installation.
- Indoor vs. Outdoor Use: Ensure the model’s listing and certifications match the intended environment, especially if using inside drafty or semi-outdoor structures.
Final selection depends on matching model capabilities to jobsite requirements: heating area, available power, desired portability, and safety needs. Use this guide to compare the models reviewed above against your workspace constraints and electrical setup.
Tips for Getting the Best HVAC Prices
- Prioritize Quality Over Cost
The most critical factor in any HVAC project is the quality of the installation. Don’t compromise on contractor expertise just to save money. - Check for Rebates
Always research current rebates and incentives — they can significantly reduce your overall cost. - Compare Multiple Quotes
Request at least three estimates before making your choice. You can click here to get three free quotes from local professionals. These quotes include available rebates and tax credits and automatically exclude unqualified contractors. - Negotiate Smartly
Once you've chosen a contractor, use the proven strategies from our guide — How Homeowners Can Negotiate with HVAC Dealers — to get the best possible final price.