Rheem Five Ton Gas Package Unit Price and Installation Costs

A Rheem five-ton gas package unit combines heating and cooling in a single outdoor system, designed for mid-size homes where duct space is limited or where a separate furnace and air conditioner aren’t practical. Understanding the price of the unit itself and the installation cost helps homeowners plan a full-budget HVAC project. This guide covers typical price ranges for the equipment, the factors that influence installation costs, what a standard installation includes, and tips to maximize efficiency and long-term savings in the American market.

Understanding Rheem Five Ton Gas Package Unit

A five-ton gas package unit is a packaged heating and cooling system loaded into one outdoor cabinet. It houses the outdoor condenser, a gas furnace, a blower, and the evaporator coil in a single enclosure. The unit draws natural gas for heating and uses electricity for cooling and blower operation. Rheem’s lineup includes models with varying efficiency ratings, often measured by AFUE for the heating portion and SEER for cooling performance. Higher-efficiency models typically command higher upfront prices but offer lower operating costs over time. Always verify the exact AFUE and SEER values on the model spec sheet.

Key features to consider include multi-stage gas valves, variable-speed blowers, and compatibility with modern smart thermostats. When selecting a model, homeowners should weigh the balance between upfront equipment cost and long-term energy savings. Local climate, fuel prices, and duct system efficiency all influence the total value of a five-ton gas package installation. It is also important to note that installation requirements, such as venting and gas line sizing, affect both performance and cost.

Price Range For The Unit

Equipment pricing for a Rheem five-ton gas package unit typically ranges from roughly $2,500 to $4,500 for the unit alone. The spread depends on efficiency level, features, and the specific Rheem model chosen. Higher-SEER and multi-stage configurations generally fall on the upper end of the price range. Some premium options may exceed this range, especially if the unit includes advanced controls or enhanced noise reduction.

When installed, the total system price usually falls between $5,500 and $9,000 or more, depending on region, existing ductwork, and additional components. Homeowners should anticipate several cost factors beyond the equipment price, including duct modifications, gas line work, electrical service upgrades, and permits. Below is a quick snapshot of typical costs to consider:

• Gas Package Unit (5 Ton): $2,500–$4,500
• Installation Labor: $2,500–$4,500
• Permits And Duct Modifications: $300–$1,500
• Total Installed Cost: $5,500–$9,000+

Cost Component	Estimated Range (USD)
Gas Package Unit (5 Ton)	$2,500–$4,500
Installation Labor	$2,500–$4,500
Permits And Duct Modifications	$300–$1,500
Total Installed Cost	$5,500–$9,000+

Factors That Influence Total Installation Cost

• Existing ductwork: Poorly sized or leaky ducts require modifications to achieve the full rated efficiency, increasing both material and labor costs.
• Location and accessibility: Easy access to the outdoor unit and attic or crawlspace spaces reduces labor time and overhead.
• Gas line length and pressure: Longer runs or higher fuel pressures may necessitate upsizing piping and additional fittings.
• Electrical service: Upgrading circuits or panels to accommodate the new unit can add to both materials and labor.
• Venting and vent termination: Proper combustion venting and weatherproofing are essential and may require additional components.
• Permits and codes: Local permitting fees and inspections vary by jurisdiction and can affect total cost.
• Old equipment removal: Hauling away the previous unit, refrigerant reclamation, and site cleanup add to labor costs.
• Climate and season: Peak seasons can drive up labor rates due to demand.
• Additional components: Thermostats, air filtration options, condensate pumps, or zoning can add to the installed price.

What A Typical Installation Includes

• Site assessment and system sizing: HVAC contractor confirms the home’s cooling load and duct suitability for a five-ton unit.
• Permitting and inspection: Local authorities ensure compliance with safety and energy codes.
• Removal of old equipment: Disconnection, safe disposal, and cleanup of the installation site.
• Ductwork evaluation and modification: Sealant, insulation, and duct repairs as needed to ensure airflow efficiency.
• Gas piping work: Sizing, connection to the home’s gas line, leak testing, and safe venting installation.
• Electrical work: Wiring and circuit protection upgraded to support the new unit, including control wiring for thermostat integration.
• Unit installation: Placement on a solid pad or mounting, secure anchoring, and weatherproofing.
• Condenate drainage and condensate pump (if needed): Proper routing to prevent water issues.
• Refrigerant lines and electrical connections: Pressure testing, leak checks, and refrigerant charge calibration.
• System startup and testing: Functional test of heating and cooling, airflow verification, thermostat pairing, and user orientation.
• Warranty activation and documentation: Registration and accessibility of manufacturer coverage.

Energy Efficiency And Operating Costs

Energy efficiency for Rheem five-ton gas package units is primarily reflected in AFUE for the heating portion and SEER for cooling performance. Modern models commonly offer high-efficiency options with AFUE in the mid-90s and SEER ratings of 15–20. Higher efficiency reduces monthly operating costs, but utility prices and climate influence the actual savings. Homeowners should consider the long-term return on investment when comparing upfront equipment costs to expected energy savings over 10–15 years.

Operating costs depend on climate, energy prices, and usage. In hot climates with long cooling seasons, electricity costs dominate, and a high-SEER model can cut annual bills. In milder climates, gas heating efficiency can have a greater impact on yearly costs. To estimate annual costs, homeowners should obtain quotes that include your local gas and electricity rates and consider a home’s insulation quality and thermostat strategy. If in doubt, request an energy savings calculator from the installer.

Choosing The Right Model And Features

Selecting the right Rheem five-ton gas package unit involves balancing upfront price with long-term savings and comfort. Consider the following:

• Efficiency tier: Higher AFUE and SEER yield greater energy savings, especially in extreme climates.
• Heating and cooling stages: Multi-stage or variable-speed options offer smoother operation and better humidity control.
• Blower motor type: ECM or variable-speed blowers improve efficiency and comfort, particularly at partial loads.
• Noise and vibration: Design features that reduce outdoor noise can improve living spaces near the unit.
• Controls and compatibility: Internet-connected thermostats and smart home integration are increasingly standard.
• Warranty and serviceability: Longer warranty durations and readily available replacement parts reduce long-term risk.
• Duct compatibility: Ensure existing ducts are appropriately sized for a five-ton unit to avoid airflow shortfalls.

Maintenance And Warranty Considerations

Regular maintenance is essential to preserve efficiency and prolong the life of a Rheem five-ton gas package unit. Homeowners should schedule professional inspections annually, including refrigerant checks, gas line integrity, electrical connections, and blower operation. Simple tasks such as filter changes and keeping outdoor coils clean can improve performance between service visits.

Warranty coverage typically includes a compressor warranty and a parts warranty, with durations varying by model and installation quality. A common baseline is a 10-year compressor warranty and a 5-year parts warranty, subject to proper installation and product registration. Some contractors or retailers offer extended warranties for an additional fee. Always confirm current terms with the installer and retailer for the exact model chosen.

Financing And Rebates

Financing options and rebates can help manage the upfront cost of a Rheem five-ton gas package unit. Homeowners should check with local utilities for equipment rebates tied to efficiency improvements and with the manufacturer for any available promotions. National or regional energy programs may offer incentives for high-efficiency systems. Additional savings can come from tax credits or utility-led demand response programs, depending on current legislation and local incentives. Always verify eligibility and documentation requirements before purchase.