Amana Gas Furnace Prices vary by model, efficiency, installation complexity, and regional labor rates. This guide explains typical price ranges, factors that influence cost, how to choose the right Amana furnace, and tips to get the best value. Readers will learn what to expect for both equipment and installation costs and how features like AFUE ratings and variable-speed blowers affect price and performance.
| Category | Typical Price Range | Notes |
|---|---|---|
| Basic Single-Stage Models | $1,200 – $2,500 | Lower AFUE, limited features |
| Mid-Range Two-Stage Models | $1,800 – $3,800 | Better efficiency and comfort |
| High-Efficiency Modulating Models | $3,000 – $6,500+ | Top AFUE, variable-speed blower |
| Installation Labor | $700 – $3,000 | Depends on complexity and region |
| Total Installed Cost (Typical) | $2,000 – $8,000+ | Includes equipment and standard installation |
Content Navigation
- Overview Of Amana Gas Furnace Prices
- Key Factors That Affect Price
- Typical Price Ranges By Model Type
- Estimated Installed Costs And Regional Variations
- How To Compare Quotes Effectively
- Energy Savings And Payback Considerations
- Incentives, Rebates, And Financing
- Installation Tips To Reduce Cost And Improve Performance
- Common Add-Ons And Their Typical Costs
- Warranty And Reliability
- Questions To Ask The Contractor
- When To Replace Rather Than Repair
- How To Save On Purchase Without Sacrificing Quality
- Resources And Next Steps
Overview Of Amana Gas Furnace Prices
Amana manufactures a range of gas furnaces from basic single-stage units to high-efficiency modulating models. Equipment prices reflect features such as AFUE (Annual Fuel Utilization Efficiency), blower type, and build quality, while installation costs depend on home layout and necessary modifications.
Retail prices for Amana units commonly fall in the ranges shown in the summary table, but actual installed costs frequently differ due to contractor markups, permit fees, and additional materials.
Key Factors That Affect Price
Several factors determine Amana gas furnace prices. Understanding these variables helps homeowners budget and compare quotes effectively.
AFUE Rating
AFUE measures furnace efficiency and is a major price driver. Higher AFUE models cost more upfront but lower fuel bills over time. Amana units typically range from mid-80% AFUE up to the high 90s for top models.
Staging And Modulation
Single-stage furnaces operate at one output level and are less expensive. Two-stage and modulating furnaces provide finer temperature control and improved comfort. Modulating units are the most costly to purchase and install.
Blower Technology
Standard PSC blowers are cheaper, while multi-speed and variable-speed ECM blowers are pricier but deliver quieter operation and better humidity control. Variable-speed blowers contribute significantly to comfort and efficiency.
Size And Capacity
Furnaces are sized in BTUs. Oversized or undersized equipment reduces efficiency and comfort. Larger-capacity units cost more; accurate load calculations by an HVAC professional ensure appropriate sizing.
Installation Complexity
Installation cost varies with ductwork condition, venting needs, thermostat upgrades, and required electrical work. Converting from electric or oil to gas increases labor and material costs. Retrofits typically cost more than straightforward replacements.
Warranty And Quality
Amana often offers strong warranties on certain components, and extended warranties may be available at extra cost through dealers. Longer warranties indicate manufacturer confidence but can raise price due to included coverage.
Typical Price Ranges By Model Type
This section outlines approximate price ranges for common Amana furnace categories including equipment-only estimates and factors that push models to higher price points.
Entry-Level Single-Stage Furnaces
Entry-level Amana furnaces usually have AFUE ratings in the mid-80s to low-90s. Equipment-only prices typically range from $800 to $1,800. These models fit tight budgets but offer less precise comfort control.
Mid-Range Two-Stage Furnaces
Two-stage models provide two heat outputs for improved efficiency and comfort. Equipment prices commonly fall between $1,200 and $2,500. They balance cost and performance for many homes.
High-Efficiency Modulating Furnaces
Top-tier Amana furnaces feature modulating gas valves and variable-speed blowers with AFUE in the high-90s. Expect equipment prices of $2,000 to $5,000+. These deliver the best efficiency and indoor comfort.
Estimated Installed Costs And Regional Variations
Installed costs combine equipment, labor, permits, and materials. Typical full-installation ranges vary by region and contractor practices.
- Low-Cost Regions: Total installed cost may fall between $2,000 and $4,000 for a standard replacement in less expensive labor markets.
- Average Regions: Most homeowners in mid-cost areas see totals between $3,500 and $6,000 for popular models and standard installations.
- High-Cost Regions: Urban and high-labor-cost areas can push installed prices to $6,000–$10,000+, especially for high-efficiency or complex installs.
How To Compare Quotes Effectively
Comparing furnace quotes requires more than looking at the bottom line. The following checklist helps evaluate true value and long-term cost.
- Confirm the exact model number and AFUE rating on each quote.
- Check whether the price includes permits, disposal of old equipment, and necessary materials.
- Ask for labor warranties and manufacturer warranty transferability.
- Verify whether duct sealing, thermostat upgrades, or zoning are included or offered as optional.
- Request an itemized breakdown to compare like-for-like across bids.
Energy Savings And Payback Considerations
Savings depend on current fuel costs, furnace AFUE changes, and usage. Upgrading from a low-efficiency to a high-efficiency Amana furnace can reduce gas consumption substantially.
A rough payback example: replacing a 78% AFUE unit with a 95% AFUE model could cut gas use by about 18–20%. Depending on fuel prices and usage, energy savings may partially offset higher equipment cost over several years.
Incentives, Rebates, And Financing
Federal, state, and utility rebates can lower the effective cost of high-efficiency Amana units. Homeowners should search for available programs and confirm eligibility requirements.
Manufacturers and dealers often provide financing options, allowing homeowners to spread the cost. Comparing APRs and term lengths is critical to avoid paying significantly more over time.
Installation Tips To Reduce Cost And Improve Performance
Smart installation choices can reduce costs and enhance long-term performance.
- Obtain multiple bids from licensed HVAC contractors and ask for references.
- Ensure proper sizing with a Manual J load calculation. Oversizing increases short cycling and energy waste.
- Consider replacing or sealing ductwork during installation to maximize efficiency gains.
- Upgrade to a programmable or smart thermostat to improve control and energy savings.
- Bundle upgrades like humidifiers or air cleaners when they offer measured benefits for household needs.
Common Add-Ons And Their Typical Costs
Accessories and related services add to the total price but may enhance comfort, efficiency, or indoor air quality.
| Add-On | Typical Cost Range |
|---|---|
| Duct Sealing | $300 – $1,200 |
| Thermostat (Smart) | $150 – $400 |
| Whole-Home Humidifier | $400 – $1,200 |
| Air Cleaner/Filter Upgrade | $200 – $800 |
| Flue or Venting Modifications | $200 – $1,000+ |
Warranty And Reliability
Amana is known for solid manufacturing and competitive warranties. Typical limited warranties cover heat exchangers and major components for varying lengths depending on the model.
Confirm warranty terms in writing, including labor coverage, parts coverage, and conditions that might void the warranty such as improper installation or maintenance lapses.
Questions To Ask The Contractor
Asking the right questions ensures transparency and protects the homeowner’s investment.
- What is the exact model number and AFUE rating being installed?
- Does the installer have HVAC licenses and insurance? Can they provide local references?
- Will the contractor perform a Manual J load calculation?
- What permits are required and who will obtain them?
- Is there a written labor warranty and what does it cover?
When To Replace Rather Than Repair
Replacement often makes financial sense when repair costs are high relative to the furnace value, especially if the unit is older than 15–20 years or has a failing heat exchanger. Efficiency improvements and potential fuel savings also tilt the decision toward replacement for older, inefficient systems.
How To Save On Purchase Without Sacrificing Quality
Cost-saving strategies include shopping during off-peak seasons, taking advantage of rebates, and comparing bundled offers from reputable dealers. Evaluating lifecycle costs rather than only upfront price helps select a furnace that delivers long-term value.
Resources And Next Steps
Homeowners researching Amana gas furnace prices should gather at least three detailed quotes, check local incentives, and verify contractor credentials. Online reviews and Better Business Bureau profiles help assess dealer reliability.
For accurate budgeting, request itemized bids that separate equipment, labor, permits, and optional upgrades. This underpins an informed decision about which Amana model delivers the best combination of price, efficiency, and comfort for the home.
Tips for Getting the Best HVAC Prices
- Prioritize Quality Over Cost
The most critical factor in any HVAC project is the quality of the installation. Don’t compromise on contractor expertise just to save money. - Check for Rebates
Always research current rebates and incentives — they can significantly reduce your overall cost. - Compare Multiple Quotes
Request at least three estimates before making your choice. You can click here to get three free quotes from local professionals. These quotes include available rebates and tax credits and automatically exclude unqualified contractors. - Negotiate Smartly
Once you've chosen a contractor, use the proven strategies from our guide — How Homeowners Can Negotiate with HVAC Dealers — to get the best possible final price.