The following roundup highlights reliable 11000 BTU heaters across categories: portable tabletop propane, ductless mini-split with heat pump, direct-vent wall heaters, and radiant buddy-style units. Each product section links to the Amazon listing and summarizes key features so you can compare coverage, safety, and installation needs quickly.
| Product | Type | Coverage / Use |
|---|---|---|
| Cuisinart Portable Tabletop Patio Heater | Propane Tabletop | Up To 30 Sq. Ft. / Outdoor Tables, Camping |
| DELLA Econo Series 11000 BTU Mini Split | Ductless Mini-Split Heat Pump | Up To 550 Sq. Ft. / Indoor Cooling & Heating |
| Comfort Glow 11,000 BTU Direct Vent Wall Heater | Direct-Vent Wall Propane | Up To 375 Sq. Ft. / Indoor Rooms |
| Rinnai EX11DTP Direct Vent Wall Furnace | Direct-Vent Wall Furnace | Indoor Whole-Room Heating / Wall Mount |
| Mr. Heater 11,000 BTU Buddy Flex | Portable Radiant Propane | Omni-Directional Heat For ~275 Sq. Ft. / Camps, Garages |
Content Navigation
Cuisinart Portable Tabletop Patio Heater
This 11,000 BTU propane tabletop heater is built for short-range outdoor warming, specified to heat approximately 30 square feet. The design emphasizes portability and simple setup, intended to sit on a table or other flat surface.
Key features listed include even heat distribution via a reflector top plate, a built-in anti-tilt automatic shut-off for safety, and a burner screen guard. These features target outdoor social settings such as patios, tailgates, or camping where quick warm-up and user safety are priorities.
As a tabletop unit, it uses a small propane cylinder and is lightweight for transport. The unit’s coverage and BTU output are suitable for localized comfort rather than whole-room heating, making it a choice for close-contact use.
DELLA Econo Series 11000 BTU Mini Split Air Conditioner
Call 888-896-7031 for Free Local HVAC Quotes – Compare and Save Today!
This 11000 BTU mini-split combines cooling and heating with a ductless inverter system and a heat pump capable of operating in low outdoor temperatures. It is rated for up to 550 sq. ft. coverage and includes a full installation kit for typical setups.
Highlighted features include 17 SEER2 efficiency, DC inverter technology for reduced energy use (advertised up to 30% savings), multiple operating modes (sleep, eco, turbo, dry), and wifi/Alexa compatibility for remote control. The spec sheet lists ETL and AHRI certifications and regional restrictions may apply.
This unit suits homeowners seeking an energy-efficient HVAC upgrade with both cooling and heating in one system. Installation requires outdoor condenser placement and indoor wall-mounted head unit(s), with the copper piping kit included for standard runs.
Comfort Glow 11,000 BTU Direct Vent Liquid Propane Wall Heater
The Comfort Glow is a direct-vent wall-mounted propane heater that claims heating for up to 375 sq. ft. Its sealed combustion system exhausts outdoors, reducing indoor combustion byproducts and improving indoor air quality compared with unvented gas heaters.
Key features include a sealed burn system, matchless piezo ignition, and a safety pilot with a built-in pressure regulator that stops gas flow if the pilot goes out. The space-saving design mounts on a wall and lists compact dimensions for tight spaces.
Call 888-896-7031 for Free Local HVAC Quotes – Compare and Save Today!
This style is targeted at homeowners or landlords seeking reliable whole-room heating without a full central furnace. Installation requires appropriate vent placement and adherence to local codes for venting and gas lines.
Rinnai EX11DTP Direct Vent Wall Furnace
The Rinnai EX11DTP is an 11,000 BTU direct vent wall furnace emphasizing energy efficiency and integrated controls. The unit features a cool-to-the-touch cabinet and self-diagnostic electronics for safety and reliability.
Rinnai highlights fuel-efficient operation by matching output to demand, and the unit includes a programmable thermostat for customized temperature control. The product details also reference integration capabilities for smart systems and Wi‑Fi-enabled setups.
This heater is positioned for homeowners seeking a wall-mounted solution with modern controls and an emphasis on safety for households with children. Proper venting and professional installation are necessary for compliance with building codes and optimal performance.
Mr. Heater 11,000 BTU Buddy Flex Heater
The Mr. Heater Buddy Flex is a portable radiant propane heater with an 11,000 BTU maximum output and variable control down to 6,000 BTU. The omni-directional mesh burner delivers radiant heat across a wide angle, listed for areas up to roughly 275 sq. ft.
Notable specifications include wind-resistant technology, a variable output control for fuel efficiency, integrated electronic ignition, and a single control gas valve. The portability and radiant performance make it suitable for enclosed workshops, garages, camping shelters, or job sites when used per safety guidelines.
The design balances mobility with heat output and includes safety features typical of portable propane heaters. Use in well-ventilated or outdoor settings as recommended by manufacturer instructions and local regulations.
Buying Guide: How To Choose A 11000 BTU Heater
Choosing the right 11000 BTU heater depends on intended use, installation complexity, safety considerations, and energy preferences. Below are the primary factors to evaluate.
1. Intended Application And Coverage
- Portable Tabletop/ Radiant Units: Best For Close-Range Outdoor Seating, Camps, Or Small Enclosed Areas. Expect localized warmth rather than whole-room heating.
- Ductless Mini-Split: Suited For Whole-Room Cooling And Heating Up To Several Hundred Square Feet; Provides Year-Round Climate Control.
- Direct-Vent Wall Heaters / Wall Furnaces: Designed To Heat Single Rooms Or Zones Without Relying On Ductwork; Good For Basements, Additions, Or Homes Without Central Furnace.
2. Fuel Type And Energy Efficiency
- Propane/Liquid Petroleum Gas: Portable and high output; requires safe storage and ventilation. Best for outdoor or well-ventilated applications and places without electricity.
- Electric / Mini-Split Heat Pump: Offers efficient heating and cooling with high seasonal efficiency ratings (SEER, HSPF). Consider electrical capacity and potential energy savings compared with gas.
- Direct-Vent Natural Gas/Propane: Sealed combustion reduces indoor pollutants; efficiency varies by model. Look for energy-saving features and programmable thermostats.
3. Safety Features
- Anti-Tilt / Tip-Over Shutoff: Essential for portable heaters used near activity or children.
- Oxygen Depletion Sensors (ODS) / Sealed Combustion: Important for gas units to prevent unsafe indoor combustion conditions.
- Cool-Touch Cabinets And Self-Diagnostics: Useful for wall units in family settings to reduce burn risk and simplify troubleshooting.
4. Installation And Venting Requirements
- Portable Units: Minimal setup; observe clearance and ventilation instructions.
- Direct-Vent Wall Heaters: Require wall penetration and proper venting to the exterior; professional installation is often advised.
- Ductless Mini-Splits: Require a qualified installer to mount indoor and outdoor units, refrigerant line runs, and electrical connections. Full kits can simplify standard installations.
5. Controls And Smart Features
- Programmable Thermostats: Improve comfort and efficiency for fixed heaters.
- Remote / Wi‑Fi Control: Adds convenience for mini-splits and some wall furnaces for scheduling and remote temperature adjustments.
6. Noise, Maintenance, And Durability
- Noise Levels: Radiant and wall-mounted gas heaters are generally quieter than some high-speed forced-air devices; check product specs if noise matters.
- Maintenance: Gas units may require periodic burner cleaning and pilot checks. Mini-splits need filter cleaning and occasional service for refrigerant lines.
- Durability: Look for corrosion-resistant materials for outdoor units and sealed cabinets for indoor models.
7. Regulatory And Local Considerations
- Local Codes: Verify venting and gas-line permits for wall-mounted and vented units.
- Regional Restrictions: Some HVAC equipment may have regional sales or installation restrictions; confirm availability and compliance.
8. Comparison Perspectives
- Cost of Ownership: Compare fuel source costs, efficiency ratings, and expected run times for your climate and usage patterns.
- Flexibility vs. Permanence: Portable units offer flexibility and low installation cost; mini-splits and wall furnaces provide integrated, permanent heating solutions with higher upfront complexity.
- Indoor Air Quality: Prefer sealed-combustion or electric systems when indoor air quality is a concern or ventilation is limited.
Use these considerations to match a heater’s BTU rating, fuel type, and installation profile to your specific space and safety needs. Professional consultation is recommended for permanent installations and fuel-line or vent modifications.
Tips for Getting the Best HVAC Prices
- Prioritize Quality Over Cost
The most critical factor in any HVAC project is the quality of the installation. Don’t compromise on contractor expertise just to save money. - Check for Rebates
Always research current rebates and incentives — they can significantly reduce your overall cost. - Compare Multiple Quotes
Request at least three estimates before making your choice. You can click here to get three free quotes from local professionals. These quotes include available rebates and tax credits and automatically exclude unqualified contractors. - Negotiate Smartly
Once you've chosen a contractor, use the proven strategies from our guide — How Homeowners Can Negotiate with HVAC Dealers — to get the best possible final price.