Quick Overview: This guide compares reliable 120 volt wall heaters suitable for bedrooms, bathrooms, offices, and supplemental heating. The selected units include basic hardwired models, fan-forced heaters with thermostats, and compact designs for recessed or surface mounting.
| Product | Power/Voltage | Key Feature |
|---|---|---|
| Cadet Com-Pak CSC151TW | 1500W / 120V | Built-in thermostat, compact recessed design |
| Cadet Com-Pak CSC101TW | 1000W / 120V | Fast heating dual coil, safety shutoff |
| INFANDY 120V Wall Heater | 1500/750W / 120V | Smart thermostat, remote, 3 modes |
| Broan-NuTone 9815WH | 1500W / 120V (convertible) | High-capacity fan-forced heating, adjustable thermostat |
| Stiebel Eltron CK Trend | 1500W / 120V | Sleek surface-mount design, quiet operation |
Content Navigation
- Cadet Com-Pak CSC151TW 1500W Wall Heater
- Cadet Com-Pak CSC101TW 1000W Wall Heater
- INFANDY 120V Electric Wall Heater With Thermostat
- Broan-NuTone 9815WH High Capacity Wall Heater
- Stiebel Eltron CK Trend 1500W Wall-Mounted Heater
- Buying Guide: How To Choose A 120 Volt Wall Heater
- Match Heater Output To Room Size
- Power And Circuit Considerations
- Mounting Type: Recessed Vs Surface
- Control Options And Thermostat Accuracy
- Noise And Airflow
- Safety Features And Compliance
- Energy Modes And Efficiency
- Installation And Maintenance
- Design And Aesthetic Fit
- Comparison Perspectives
- Final Selection Checklist
Cadet Com-Pak CSC151TW 1500W Wall Heater
The Cadet Com-Pak CSC151TW is a 1500 watt, 120 volt recessed wall heater with an integrated thermostat. The unit is designed for direct wall mounting and provides up to 5120 BTU of heating capacity. The complete unit includes a thermostat and grille for a ready-to-install solution.
Key features referenced from the listing include a complete unit with thermostat, compact styling suitable for discreet installation, and a white finish that matches common interior trims. The model’s rated output positions it for small-to-medium rooms or as a supplemental heat source.
Installation considerations: this model typically requires a dedicated circuit and hardwiring by a qualified electrician. The recessed design uses less wall projection than surface units, important for tight corridors and limited spaces.
Cadet Com-Pak CSC101TW 1000W Wall Heater
Call 888-896-7031 for Free Local HVAC Quotes – Compare and Save Today!
The Cadet CSC101TW is a 1000 watt / 120 volt wall heater intended for compact spaces up to roughly 200 sq. ft., depending on insulation and climate. The unit emphasizes fast heating with a dual coil element.
Listed features highlight fast heating from a dual coil element, built-in safety that shuts the unit off if temperatures exceed normal operating ranges, and a compact recess-mount design that minimizes intrusion into living space.
Use cases include bathrooms, small bedrooms, and offices where rapid supplemental heat is needed. The lower wattage makes it compatible with circuits and rooms where 1500W is excessive or where reduced load is preferred.
INFANDY 120V Electric Wall Heater With Thermostat
The INFANDY wall heater is a modern 120V hardwired unit offering multi-mode operation and a digital thermostat. It supports three heating modes (Full Power, Eco, Ventilation), a remote, a 9-hour timer, child lock, and overheat protection.
From the product features: this unit aims for energy efficiency via Eco Mode and offers a thermostat adjustable between 40°F and 86°F. Safety features include overheat protection and child lock, making it suited for family spaces and bathrooms.
Call 888-896-7031 for Free Local HVAC Quotes – Compare and Save Today!
Practical notes: the remote and timer add programming convenience without requiring external controllers. The range of wattage options (1500/750 in the listing) supports flexible installation choices based on circuit limitations and room size.
Broan-NuTone 9815WH High Capacity Wall Heater
The Broan-NuTone 9815WH is a high-capacity fan-forced wall heater that operates at 1500W and 120V but is convertible to 240V in installations that require it. The unit features a front-mounted adjustable thermostat and a contemporary white grille.
Product features include energy-saving supplemental heating, a permanently lubricated motor that requires no oiling, and an adjustable thermostat for straightforward temperature control. The design uses straight louvers and subtle contours for a clean façade.
Because the model is fan-forced and rated as high-capacity, it is suitable for rooms needing rapid airflow distribution. The permanently lubricated blower reduces maintenance demands compared with older fan-heater designs.
Stiebel Eltron CK Trend 1500W Wall-Mounted Heater
The Stiebel Eltron CK Trend is a 1500 watt, 120 volt surface-mount electric fan heater known for a compact European aesthetic and quiet operation. The downdraft design disperses warm air evenly across the room.
Listing highlights include a built-in thermostat, quiet operation (listed around 49 dB(A)), and a sleek surface-mount profile that installs without deep wall recessing. The exterior finish and low-profile build are designed for visible interior locations.
Application scenarios include living rooms, offices, and other spaces where both appearance and acoustic performance matter. Surface mounting simplifies installation where recessed boxes are not available.
Buying Guide: How To Choose A 120 Volt Wall Heater
Match Heater Output To Room Size
Estimate the required BTU or wattage by room: as a general guideline, 1500W (≈5120 BTU) is appropriate for many small to medium rooms, while 1000W suits compact bathrooms or very small bedrooms. Consider ceiling height, insulation, and window area when sizing.
Power And Circuit Considerations
Confirm circuit capacity and wiring before selecting a hardwired unit. 120V, 1500W heaters typically draw ~12.5 amps and often require a dedicated circuit or branch circuit capacity check. Lower-wattage 1000W units draw less current and may integrate more easily on existing wiring.
Mounting Type: Recessed Vs Surface
- Recessed Units (Com-Pak style): Cleaner look, less surface projection, may require wall cavity and electrical box.
- Surface/Surface-Mount Units: Easier installation where recessing is impractical. May project slightly into the room.
Control Options And Thermostat Accuracy
Built-in thermostats offer integrated control and reduced wiring. Digital thermostats and models with remote control provide finer tuning and programming. Verify the thermostat range and whether it displays Fahrenheit if temperature precision matters.
Noise And Airflow
Fan-forced models provide faster heat distribution but produce blower noise. If quiet operation is important, check published dB(A) values or product descriptions for quiet operation. Downdraft or lower-speed fans are preferable for bedrooms.
Safety Features And Compliance
Look for overheat protection, thermal cutoffs, and listings that conform to regional electrical codes. Child lock, tip/tilt shutoff (for portable types), and automatic shutdown on fault conditions improve safety in family environments.
Energy Modes And Efficiency
Multi-mode heaters with Eco or low-power settings reduce energy draw while maintaining comfort. Consider units with programmable timers or thermostats that minimize runtime.
Installation And Maintenance
Hardwired models typically require a licensed electrician for safe installation. Check whether the model allows mounting into an existing wall can (reduces patching) and whether the blower motor is permanently lubricated or requires periodic maintenance.
Design And Aesthetic Fit
Grille color, edge styling, and profile affect visible installations. Slim or radius-edged grilles are common for contemporary interiors; surface-mount boxes can be chosen when recessed installation would damage finishes.
Comparison Perspectives
- Cost Of Operation: Compare wattage and thermostat accuracy rather than list price. Lower-watt modes and Eco settings reduce runtime and energy use.
- Installation Complexity: Recessed Com-Pak units need wall cans and can require wall repair if retrofitted; surface mount models simplify installation.
- Functionality: Digital thermostats, remote control, and timers add user convenience at the cost of slightly higher complexity.
- Durability And Maintenance: Permanently lubricated blowers reduce maintenance; replaceable filters (if present) require periodic cleaning.
Final Selection Checklist
- Confirm room size and pick appropriate wattage (1000W vs 1500W).
- Verify circuit capability and whether a dedicated circuit is needed.
- Choose mounting type based on wall construction and aesthetics.
- Prioritize safety features like overheat protection and thermostatic control.
- Decide on noise tolerance and select fan or downdraft designs accordingly.
This buying guide covers technical compatibility, safety, efficiency, and usability considerations so you can compare 120 volt wall heaters from multiple perspectives before purchase.
Tips for Getting the Best HVAC Prices
- Prioritize Quality Over Cost
The most critical factor in any HVAC project is the quality of the installation. Don’t compromise on contractor expertise just to save money. - Check for Rebates
Always research current rebates and incentives — they can significantly reduce your overall cost. - Compare Multiple Quotes
Request at least three estimates before making your choice. You can click here to get three free quotes from local professionals. These quotes include available rebates and tax credits and automatically exclude unqualified contractors. - Negotiate Smartly
Once you've chosen a contractor, use the proven strategies from our guide — How Homeowners Can Negotiate with HVAC Dealers — to get the best possible final price.