Finding a reliable 125,000 BTU garage heater requires balancing fuel type, portability, safety features, and output coverage. The table below summarizes five top Amazon heaters suited for large garages, workshops, and job sites to help you compare capacity and key features at a glance.
| Product | Fuel | Output Range | Best For |
|---|---|---|---|
| L.B. White Tradesman 170N | Natural Gas | 125,000–170,000 BTU | Industrial/Outdoor Job Sites |
| Mr. Heater MH170QFAVT | Propane | 125,000–170,000 BTU | High-Output Portable Heating |
| Dura Heat GFA125A | Propane | 70,000–125,000 BTU | Variable Output Garage Use |
| Mr. Heater 125,000 BTU F271390 | Propane | 125,000 BTU | Quiet High-Output Workspaces |
| ProTemp PT-125V-GFA-A | Propane (LP) | 125,000 BTU | High Airflow Warehouse/Garage |
Content Navigation
- L.B. White Tradesman 170N Portable Forced Air Heater 125,000-170,000 BTUH
- Mr. Heater MH170QFAVT 170,000 BTU Portable Propane Forced Air Heater
- Dura Heat GFA125A 70K-125K BTU Propane Forced Air Heater
- Mr. Heater 125,000 BTU Forced Air Propane Heater F271390
- ProTemp 125,000 BTU LP Propane Heater PT-125V-GFA-A
- Buying Guide: Choosing The Right 125,000 BTU Garage Heater
L.B. White Tradesman 170N Portable Forced Air Heater 125,000-170,000 BTUH

The L.B. White Tradesman 170N is a natural gas forced-air heater with a 125,000–170,000 BTU/hr rating. It uses direct-fired technology designed for maximum fuel efficiency and strong heating performance in large, open spaces like garages, shops, and construction sites.
Key features include electronic spark ignition for reliable starts and a diagnostic light for troubleshooting. The unit is built with a heavy-gauge combustion chamber and a tri-shield coating meant to resist abrasion and corrosion in harsh environments. This product emphasizes durability and continuous operation in commercial settings.
Consider this option if you have access to natural gas and need a robust, high-output heater with industrial-grade construction and diagnostic support for longer job-site or garage use.
Mr. Heater MH170QFAVT 170,000 BTU Portable Propane Forced Air Heater

Call 888-896-7031 for Free Local HVAC Quotes – Compare and Save Today!
The Mr. Heater MH170QFAVT is a propane forced-air heater delivering 125,000–170,000 BTU/hr, suitable for large garages and job sites up to several thousand square feet. It targets users needing portable high-output heat with easy setup.
Its notable attributes are Quiet Burner Technology that reduces operational noise by roughly half compared to standard propane units, and comprehensive safety features including a high-temperature limit switch and thermoelectric safety valves. The heater is described as heavy-duty with a sturdy handle for transport.
This heater is appropriate when portability and reduced noise matter, and when propane supply is preferred or required for seasonal or off-grid use.
Dura Heat GFA125A 70K-125K BTU Propane Forced Air Heater

The Dura Heat GFA125A offers variable output from 70,000 to 125,000 BTU, providing flexible heating for medium to large garages. It operates on propane and is built for straightforward, simple operation.
Run-time is notable on large propane cylinders, with the unit operating many hours on a 100 lb. tank depending on output settings. The variable output makes it useful for garages where occasional heavy heat is needed without constant maximum output.
Call 888-896-7031 for Free Local HVAC Quotes – Compare and Save Today!
Choose this model if you need adjustable BTU output and straightforward propane operation for intermittent or multi-day garage heating without complex installation.
Mr. Heater 125,000 BTU Forced Air Propane Heater F271390

This Mr. Heater F271390 is a dedicated 125,000 BTU forced-air propane heater featuring Quiet Burner Technology, a high-temperature limit switch, and an included 10 ft hose and regulator for immediate connection to a propane cylinder.
Designed for large garages and workshops, it balances performance with noise reduction. Safety features like the limit switch are intended to protect the heater during extended operation. The included hose and regulator support easier setup for propane tanks without separate purchases.
This unit is suitable when a fixed 125k BTU output with quieter operation and included hookup components is desirable for workshop or garage environments.
ProTemp 125,000 BTU LP Propane Heater PT-125V-GFA-A

The ProTemp PT-125V-GFA-A is a 125,000 BTU propane heater engineered for high airflow. It pairs matched direct-drive motors and blades capable of high cubic feet per minute (CFM) ratings, which helps distribute heat across large garage spaces effectively.
Construction includes powder-coated steel guards for corrosion resistance and an energy-efficient motor that draws minimal amperage. This unit is intended for workshops and warehouses where air movement and uniform distribution of heat are priorities.
Select this ProTemp when airflow and even heat distribution are central requirements for a large garage or workshop environment.
Buying Guide: Choosing The Right 125,000 BTU Garage Heater
Fuel Type: Propane vs Natural Gas
Natural Gas heaters (e.g., L.B. White Tradesman) provide continuous, often lower-cost fuel for locations with existing service. They require permanent hookups and are best for repeated, long-term use.
Propane units (e.g., Mr. Heater, Dura Heat, ProTemp) are portable and useful where natural gas is unavailable. Consider cylinder logistics, run time on tank size, and refilling costs.
Output And Coverage
BTU ratings indicate raw heat output but not distribution. A 125,000 BTU heater can cover large garages but actual coverage depends on insulation, ceiling height, and drafts. Use higher CFM airflow or fans to improve distribution.
Portability And Installation
Portable forced-air heaters are typically plug-and-play for propane models with hoses and regulators. Natural gas units often need professional installation. Consider how often you’ll move the heater and whether permanent installation is acceptable.
Safety Features
Look for high-temperature limit switches, thermoelectric safety valves, and reliable ignition systems. These features reduce fire risk and protect the unit during overheating or unsafe conditions. Ensure proper clearance requirements and ventilation for direct-fired heaters.
Noise Level
Jobsites and garages benefit from Quiet Burner technology when prolonged work occurs near the heater. If noise is a concern for comfort or communication, prioritize models advertising reduced operational sound.
Durability And Build Quality
Heavy-gauge combustion chambers, corrosion-resistant coatings, and robust handles improve longevity in demanding environments. Choose industrial-grade finishes for outdoor-exposed or construction site use.
Heat Distribution
High BTU alone won’t ensure even warmth. Consider models with higher CFM ratings, directional louvers, or pairing with circulating fans to reduce cold spots in large garages with high ceilings.
Runtime And Fuel Logistics
For propane units, check estimated run times on the cylinder sizes you intend to use. Variable-output models can extend runtime by lowering BTU when full heat isn’t needed.
Control And Convenience
Some heaters include easier ignition systems, diagnostic lights, and included hoses/regulators. These conveniences affect setup time and daily use convenience—important if you frequently move or reconfigure the workspace.
Comparison Perspectives
- Cost of Operation: Natural gas often yields lower long-term fuel costs if service exists; propane is costlier per BTU but portable.
- Performance: Direct-fired forced-air heaters deliver immediate high heat but require ventilation management.
- Noise vs Output: Quieter burners reduce noise but may come with slightly different combustion tuning; prioritize based on environment.
- Permanent vs Portable: Fixed natural gas heaters suit set-and-forget scenarios; portable propane units give flexibility for multi-location use.
Use the above factors to match heater type, BTU output, fuel availability, and safety features to your garage size and usage patterns. Proper sizing, ventilation, and adherence to clearance and installation instructions ensure safe and effective heating performance.
Tips for Getting the Best HVAC Prices
- Prioritize Quality Over Cost
The most critical factor in any HVAC project is the quality of the installation. Don’t compromise on contractor expertise just to save money. - Check for Rebates
Always research current rebates and incentives — they can significantly reduce your overall cost. - Compare Multiple Quotes
Request at least three estimates before making your choice. You can click here to get three free quotes from local professionals. These quotes include available rebates and tax credits and automatically exclude unqualified contractors. - Negotiate Smartly
Once you've chosen a contractor, use the proven strategies from our guide — How Homeowners Can Negotiate with HVAC Dealers — to get the best possible final price.