Best 70000 Btu Heater Options for Garages, Workshops, and Pools

Choosing a heater near the 70,000 BTU range requires matching fuel type, installation needs, and application. Below is a quick comparison of five relevant Amazon options covering electric heat pumps for pools, natural gas and propane unit heaters, and a nozzle kit for high-BTU kerosene units.

Product	Type	Key Feature
FibroPool FH270 70,000 BTU	Electric Heat Pump (Pool)	All-electric, high-efficiency titanium heat exchanger
Mr. Heater Big Maxx MHU80NG	Natural Gas Unit Heater	80,000 BTU, designed for 2,000 sq. ft. coverage
Mr. Heater MHU80LP Propane Unit Heater	Propane Unit Heater	80,000 BTU, spark ignition, ceiling-mountable
Mr. Heater Nozzle Kit (70,000 BTU Compatible)	Nozzle Accessory	Brass kerosene nozzle compatible with 70,000 BTU Reddy heaters
Dyna-Glo IR30PMDG-1 30,000 BTU	Liquid Propane Infrared Wall Heater	Infrared radiant heat, vent-free wall design

FibroPool Swimming Pool Heat Pump – FH270 70,000 BTU

Check Price on Amazon

The FibroPool FH270 is marketed as a high-efficiency, all-electric heat pump suitable for in-ground pools up to 15,000 gallons and above-ground pools up to 27-foot round. It transfers heat from air to water rather than burning fuel, making it a clean and green option for pool heating.

Key listed features include a titanium heat exchanger, high-pressure differential compressor, and a design optimized for energy efficiency. The manufacturer recommends use in humid climates down to about 50°F for ideal performance. This unit requires electrical power and pool plumbing hookups, and it is intended as a seasonal extender rather than a high-temperature spa heater.

Mr. Heater F260560 Big Maxx MHU80NG Natural Gas Unit Heater, 80,000 BTU

Check Price on Amazon

The Mr. Heater Big Maxx MHU80NG is an 80,000 BTU natural gas unit heater designed for larger spaces such as garages, shops, or warehouses. The product listing notes coverage up to 2,000 square feet and includes mounting angle brackets.

Features from the manufacturer include the necessary venting categories (vertical and horizontal options), a 120V electrical requirement for controls, and an overall compact footprint. The unit is designed for fixed installation and requires proper gas supply and venting per local codes. The package does not include a thermostat, gas regulator, or hoses; those are separate items to arrange for installation and safe operation.

Mr. Heater Propane Unit Heater 80,000 BTU/Hr. MHU80LP

Check Price on Amazon

The MHU80LP is the propane-fueled counterpart to the natural gas MHU80NG. It delivers up to 80,000 BTU/hr and is intended for ceiling or wall installation to heat medium-to-large interior spaces up to the manufacturer’s square-foot guidance.

Listed features include spark ignition with a self-diagnostic control module and included angle brackets for ceiling mounting. As with other propane unit heaters, installation requires appropriate gas supply fittings, clearance from combustibles, and adherence to venting/combustion air requirements. The unit is suited for fast forced-air heating rather than radiant or lounge-style comfort heating.

Mr. Heater Nozzle Kit Compatible With 70000 BTU Reddy Heater

Check Price on Amazon

This Nozzle Kit is a replacement accessory intended for kerosene heaters and other portable units rated around 70,000 BTU. It includes an all-brass nozzle with an O-ring and is designed to be disassembled for cleaning.

Reference features state compatibility with Reddy Heater, Master, LB White, and Handy Master models at the 70,000 BTU level. For users maintaining older high-BTU kerosene or liquid-fuel heaters, this kit supports reliable fuel flow and spray patterns. Installation and cleaning should follow manufacturer instructions to maintain safe combustion characteristics.

Dyna-Glo IR30PMDG-1 30,000 BTU Liquid Propane Infrared Vent Free Wall Heater

Check Price on Amazon

Although rated lower than 70,000 BTU, the Dyna-Glo IR30PMDG-1 provides a radiant infrared heating option for indoor spaces up to approximately 1,000 sq. ft., depending on insulation and climate. Infrared heaters heat objects and people directly rather than primarily warming air.

Manufacturer features include a vent-free design and variable output up to 30,000 BTU/hr. Because it is a liquid propane product and vent-free, installation and indoor use must comply with local codes and manufacturer safety guidelines for indoor combustion appliances. This unit is presented as a compact wall-mounted alternative to large forced-air systems.

Buying Guide: How To Choose The Right ~70,000 BTU Heater

Selecting a heater in the 70,000–80,000 BTU range depends on the intended application, fuel availability, installation constraints, and safety requirements. The following criteria summarize essential considerations.

1. Application And Space Type

Match the heater form factor to the space:

• Pool Heat Pump: Choose an electric heat pump (like the FibroPool FH270) specifically designed to heat water. Pool heat pumps transfer ambient air heat into pool water; they are not suitable for space heating.
• Workshop/Warehouse: Unit heaters (natural gas or propane) deliver high BTU forced air and are better suited to large, open interiors.
• Radiant Needs: Infrared or radiant wall heaters are more efficient for heating people and objects in a zone without heating the entire volume of air.
• Portable Fuel Heaters: Kerosene or liquid-fuel heaters often require maintenance items like replacement nozzles for reliable operation.

2. Fuel Type And Availability

Fuel affects operating cost, installation, and venting:

• Electric Heat Pumps: All-electric, reduced emissions at point of use, require electricity and suitable ambient temperature for optimal COP (coefficient of performance).
• Natural Gas: Often lower operating cost where natural gas service exists; requires proper venting or listed vent categories and local code compliance.
• Propane: Suitable where natural gas is unavailable; requires cylinder or bulk propane storage and proper fittings.
• Kerosene/Liquid Fuel: Portable and high-BTU but need routine maintenance and proper combustion controls; replacement parts like nozzles are sometimes necessary.

3. Installation And Venting Requirements

Review clearance, venting category, and mounting method:

• Clearances: Unit heaters list minimum clearances from floors, ceilings, and combustibles. Check manufacturer specifications and local codes.
• Venting: Natural gas appliances may require category 1 or category 3 venting; vent-free appliances have different code limitations and are not permitted everywhere.
• Mounting: Some units are ceiling mounted, others wall mounted; ensure structural capacity for mounting brackets included or provided.

4. Efficiency, Performance, And Climate

Consider how ambient conditions affect output:

• Heat Pumps perform best in moderate to warm climates; rated output drops as ambient air temperature decreases.
• Gas/Propane Unit Heaters provide consistent BTU output independent of outdoor temperature but depend on combustion efficiency and ducting loss.
• Radiant vs. Convective: Radiant heat is efficient for spot heating; forced-air systems mix and move air for broader coverage.

5. Safety Features And Controls

Prioritize units with robust safety controls:

• Ignition Controls: Spark ignition and diagnostic modules assist reliable starts and fault identification.
• Overheat And Tip-Over Protection: Especially critical for portable electric and liquid-fuel devices.
• Sealed Combustion: Direct vent or sealed-burn systems reduce indoor combustion byproducts for wall-mounted gas units.

6. Maintenance And Replacement Parts

Factor in serviceability:

• Heat Pump Maintenance: Periodic coil cleaning, refrigerant checks, and proper winterization extend service life.
• Unit Heater Maintenance: Inspect burners, ignition components, and vent passages annually.
• Replacement Parts: For liquid-fuel heaters, keep a supply of nozzles, O-rings, and filters; parts listings like the Mr. Heater nozzle kit ease upkeep.

7. Coverage Area And BTU Sizing

Use the heater’s recommended coverage as a guideline and adjust for insulation, ceiling height, and usage patterns:

• High ceilings and poor insulation increase required BTU output.
• Spot heating or intermittent use can reduce effective coverage needs compared to continuous whole-space conditioning.

8. Regulatory And Code Compliance

Verify local building and fire codes before purchase and installation:

• Some jurisdictions restrict vent-free combustion appliances indoors.
• Gas line installations often require licensed professionals and permits.
• Pool heat pumps have local electrical and mechanical code implications for outdoor equipment.

9. Noise, Footprint, And Placement

Consider operational noise, outdoor clearance for pool heat pumps, and indoor footprint for unit heaters. Forced-air unit heaters can produce noticeable airflow noise; heat pumps have compressors and fans that require placement away from noise-sensitive areas.

10. Total Cost Of Ownership

Estimate operating cost by fuel type, efficiency ratings, and expected run hours. Electric heat pumps may have higher equipment cost but lower ongoing fuel usage in favorable climates. Gas and propane units tend to provide consistent high-BTU delivery with varying fuel costs.

Using these perspectives—application, fuel, installation, safety, maintenance, sizing, and regulations—will help narrow choices between high-BTU heaters like electric pool heat pumps, natural gas or propane unit heaters, and accessories that support high-BTU portable heaters.