The list below compares reliable Amish-style electric heaters and compatible replacement parts for Amish electric fireplaces. This guide focuses on mantel-style units and common replacement blower or heating elements used in Heat Surge and similar Amish electric fireplaces.
| Product | Type | Primary Benefit |
|---|---|---|
| Real Flame Chateau 41″ Amish Solid Wood Electric Fireplace | Mantel Electric Fireplace | Solid wood mantel with included electric firebox and remote |
| Adviace Replacement Fireplace Fan Blower And Heating Element (Combo) | Replacement Blower + Heating Element | Complete blower + coil kit for Heat Surge/Amish inserts |
| Adviace Replacement Fan Blower (Squirrel Cage) | Replacement Blower | Sized blower for common Heat Surge models |
| Criditpid Replacement Fireplace Blower & Heating Element | Replacement Blower + IR Element | Aftermarket blower and IR element for Heat Surge series |
| Durablow IR Heating Element Replacement HS-30000216 | Heating Element Only | Direct-fit IR heating element for Heat Surge / Real Flame heaters |
Content Navigation
- Real Flame Chateau 41″ Amish Solid Wood Electric Fireplace With Mantel
- Adviace Replacement Fireplace Fan Blower And Heating Element For Heat Surge
- Adviace Replacement Fan Blower For Heat Surge Electric Fireplace
- Criditpid Replacement Fireplace Blower & Heating Element For Heat Surge
- Durablow IR Heating Heater Element Replacement HS-30000216 For Heat Surge
- Buying Guide: Choosing The Right Amish Electric Heater Or Replacement Part
Real Flame Chateau 41″ Amish Solid Wood Electric Fireplace With Mantel
This unit is a mantel-style electric fireplace built with a mix of solid wood, veneered MDF, and powder-coated steel. The assembly includes an electric firebox, remote control, hardware, and a long power cord for flexible placement. The listed finish is Espresso, and the product provides adjustable thermostat settings built into the firebox.
Features cited: constructed of solid wood, veneered MDF and powder coated steel; includes mantel, electric firebox, remote control, hardware, and 79″ power cord. The product is appropriate for users seeking an integrated mantel solution with an included electric insert rather than standalone replacement parts.
Adviace Replacement Fireplace Fan Blower And Heating Element For Heat Surge
This aftermarket kit supplies both the blower and the heater coil for a range of Heat Surge and Amish electric fireplace inserts. The package lists specific model compatibility, and dimensions are provided for accurate fit checks prior to purchase.
Call 888-896-7031 for Free Local HVAC Quotes – Compare and Save Today!
Features cited: replacement blower and heating coil included; blower size L 10″ x W 3.5″ x H 3″; heater element L 8.27″ x W 1.38″; 1350W, 120V; fits Heat Surge ADL-2000M-X, ADL-2000MX, Roll-N-Glow, Accent, Cozy, Curio insert, HT series and multiple X-series models. The product notes a top tip: fits only the listed Heat Surge and Amish models, so verify your insert model before ordering.
Adviace Replacement Fan Blower For Heat Surge Electric Fireplace
This item is an aftermarket squirrel cage blower sized for common Heat Surge and Amish inserts. It is specified to deliver a targeted heat output when paired with compatible heating elements and fireboxes.
Features cited: includes an electric fireplace blower; blower dimensions L 10″ x W 3.5″ x H 3″; performance listed at 2303 BTU’s / 4606 BTU’s depending on setting; standard setting indicated to heat approximately a 12′ x 13′ room. Compatibility includes ADL-2000M-X, ADL-2000MX, Roll-N-Glow, Accent, Cozy, Curio insert, HT series and X-series models. Use this part when the fan motor is noisy, failing, or underperforming.
Criditpid Replacement Fireplace Blower & Heating Element For Heat Surge
This aftermarket assembly combines a blower fan with an infrared (IR) heating element sized for Heat Surge/Amish electric fireplaces. The listing repeats the typical dimensions and power characteristics used across compatible models.
Call 888-896-7031 for Free Local HVAC Quotes – Compare and Save Today!
Features cited: blower fan size L 10″ x W 3.5″ x H 3″ (element not included in those dimensions); heater element L 8.27″ x W 1.38″; consumption 1350W at 120V. Compatibility is listed broadly across Heat Surge series ADL-2000M-X, ADL-2000MX, Roll-N-Glow, Accent, Cozy, Curio, HT and X-series. The product is presented as an OEM-style replacement for failed or aged units.
Durablow IR Heating Heater Element Replacement HS-30000216 For Heat Surge
This listing offers a single original-style IR heating element compatible with Heat Surge and Real Flame electric fireplaces. It is presented as a direct replacement part for models that use the HS-30000216 element.
Features cited: marketed as the original IR heater element for Heat Surge electric fireplaces; described as brand new and intended for direct fit in applicable Amish heater models. Use this part when the heating element has failed but the blower and electronics remain operational.
Buying Guide: Choosing The Right Amish Electric Heater Or Replacement Part
This section covers practical considerations when selecting a mantel electric fireplace or replacement components for Amish electric heaters. Verify model compatibility and measure dimensions before purchase.
Type And Intended Use
- Mantel Electric Fireplaces: Choose full mantel units when you want cabinetry, décor, and an integrated firebox. These include the mantel, surround, and often carry the firebox pre-installed.
- Replacement Parts: Choose blower or element replacements when your existing insert has a working enclosure but failing heating or fan components.
Compatibility And Fit
- Model Numbers Matter: Many listings specify compatibility with Heat Surge ADL-2000M-X, ADL-2000MX, Roll-N-Glow and X-series inserts. Cross-check the model label on your fireplace or owner’s manual.
- Physical Dimensions: Blower and element dimensions (e.g., blower L 10″ x W 3.5″ x H 3″, element L 8.27″ x W 1.38″) must match the cavity and mounting points. Measure before ordering.
Power Rating And Performance
- Wattage And Voltage: Common replacement elements are specified at 1350W and 120V. Ensure the element rating aligns with your unit’s electrical design to avoid overloading circuitry.
- Heating Output: Replacement blowers cite BTU estimates and room coverage. Match output expectations to room size—smaller blowers are suited to single rooms, while larger inserts may heat open areas more effectively.
Durability And Materials
- Construction: Mantels built from solid wood and veneered MDF are standard for Amish-style units. Check finish descriptions (e.g., Espresso) to confirm visual match.
- Element Type: Infrared heating elements are common in Heat Surge and Amish electric heaters for steady radiant heat. Ensure replacement elements are rated for IR operation and are certified where applicable.
Installation And Tools
- Skill Level: Replacing a blower or element can require moderate DIY skill. Disconnect power, remove the insert, and follow published wiring and mounting steps. If unsure, use a certified technician.
- Included Hardware: Some parts arrive with mounting hardware; others may not. Confirm what’s included and have basic tools ready (screwdrivers, pliers, multimeter).
Safety And Certification
- Electrical Safety: Confirm parts match the voltage and wiring of your home and fireplace. Ensure the unit is unplugged during service and that replacement parts carry relevant safety characteristics.
- Overheat And Tip Sensors: Mantel units with fireboxes often include thermostats and safety cutouts. When replacing elements, ensure the firebox sensors remain functional and unobstructed.
Performance Comparisons
- Integrated Mantel vs. Aftermarket Parts: An integrated mantel and firebox (like the Real Flame Chateau) provides a complete aesthetic and functional package. Aftermarket parts are cost-effective solutions for repair without replacing the whole unit.
- OEM vs. Aftermarket Replacements: OEM or OEM-style elements (such as Durablow and specified Adviace fitments) may match original specifications closely. Aftermarket options can be equivalent but verify dimensions and wattage.
Longevity And Maintenance
- Routine Checks: Periodically inspect fans for dust build-up, test thermostats, and listen for abnormal fan noise. Dust and pet hair are common causes of blower replacement.
- Element Life: Heating elements can degrade with use. Replacements are common maintenance items; ensure proper break-in cycles and avoid prolonged operation without proper airflow.
Return Policies And Support
- Vendor Return Window: Check the seller’s return policy in case the part does not fit or arrives damaged.
- Manufacturer Support: When possible, retain model and serial numbers for support and verify compatibility through manufacturer resources.
When selecting any of these products, prioritize exact model compatibility, correct dimensions, and matching electrical ratings to ensure safe operation and effective heating performance. For mantel replacements choose full units when you want a finished look; for repairs select the proper blower or element based on measurements and model fit.
Tips for Getting the Best HVAC Prices
- Prioritize Quality Over Cost
The most critical factor in any HVAC project is the quality of the installation. Don’t compromise on contractor expertise just to save money. - Check for Rebates
Always research current rebates and incentives — they can significantly reduce your overall cost. - Compare Multiple Quotes
Request at least three estimates before making your choice. You can click here to get three free quotes from local professionals. These quotes include available rebates and tax credits and automatically exclude unqualified contractors. - Negotiate Smartly
Once you've chosen a contractor, use the proven strategies from our guide — How Homeowners Can Negotiate with HVAC Dealers — to get the best possible final price.