Finding the right wall heater for an apartment means balancing size, safety, efficiency, and installation constraints. Below is a concise comparison of top wall-mounted heaters available on Amazon, followed by detailed product overviews and a practical buying guide to help choose the best fit for your living space.
| Product | Type | Power / Range | Smart / Controls |
|---|---|---|---|
| Keystone 14,000 BTU Wall AC With Supplemental Heat | Wall AC with Supplemental Heat | 14,000 BTU / 10,600 BTU heat (230V) | Remote / Modes |
| Dreo Smart Wall Heater WH719S | PTC Electric Wall Heater | 1500W, wide oscillation | App, Alexa, Remote |
| Dreo IP24 Wall Heater | PTC Electric Wall Heater (IP24) | 1500W, manual 30° oscillation | App, Alexa, Remote |
| Heat Storm HS-1500-PHX-WIFI Infrared Heater | Infrared Wall Heater | 1500W | Wi‑Fi, App, Remote |
| Broan-NuTone 9815WH Wall Heater | High Capacity Electric Wall Heater | 1500W, 120/240V | Built-in Thermostat |
Content Navigation
- Keystone 14,000 BTU Wall AC With Supplemental Heat
- Dreo Smart Wall Heater WH719S
- Dreo IP24 Electric PTC Wall Heater
- Heat Storm HS-1500-PHX-WIFI Infrared Wall Heater
- Broan-NuTone 9815WH High Capacity Wall Heater
- Buying Guide: How To Choose An Apartment Wall Heater
- 1. Determine Heating Requirements
- 2. Electrical Supply And Installation
- 3. Heater Type And Heat Delivery
- 4. Controls And Smart Features
- 5. Safety Features
- 6. Noise Level And Comfort
- 7. Space And Aesthetics
- 8. Energy Efficiency And Operating Cost
- 9. Maintenance And Reliability
- 10. Building Regulations And Landlord Rules
Keystone 14,000 BTU Wall AC With Supplemental Heat
This wall-mounted air conditioner combines cooling, dehumidifying, fan circulation, and supplemental heating in one unit. The manufacturer lists a 14,000 BTU cooling capacity with a 10,600 BTU supplemental heating capacity on a 230V/20A supply, intended for large rooms up to about 700 sq. ft.
- Multi-mode Functionality: Cooling, dehumidify, fan, and supplemental heating modes provide year-round use.
- Supplemental Heat Only: Heating mode is indicated as supplemental — not a primary heat source for very cold conditions.
- Installation: Wall-mounted with interior trim kit; requires a dedicated 230V/20A outlet.
- Best For: Apartments that allow through-wall AC installation and need large-room cooling with occasional heating support.
Dreo Smart Wall Heater WH719S
The WH719S is a smart PTC ceramic wall heater with 120° vertical oscillation to distribute heat from floor to ceiling. It supports app control, voice assistants, a remote, and a 24-hour timer for scheduled operation.
- Oscillation Design: 120° vertical oscillation helps spread warm air more evenly than fixed-direction units.
- Smart Controls: Dreo app access, Alexa integration, precise 1°F setpoint control across a wide range.
- Thermostat Accuracy: Designed for fast, steady heating with precise temperature control suitable for bedrooms and offices.
- Best For: Renters who prioritize smart home integration and even heat distribution without permanent electrical rework.
Dreo IP24 Electric PTC Wall Heater
Call 888-896-7031 for Free Local HVAC Quotes – Compare and Save Today!
This IP24-rated Dreo model emphasizes quiet operation and targeted comfort with a manual 30° oscillation and PTC heating. It includes app control, remote control, ECO mode, and a temperature calibration feature.
- Performance: Strong airflow (listed at 11.5 ft/s) with low noise (~28 dB) for minimal disruption.
- Smart And Safe: App control, voice compatibility, and ECO mode for energy-conscious operation.
- Precision: Temperature calibration in the app maintains accurate room readings over time.
- Best For: Indoor spaces where low noise and energy-efficient steady heat are priorities.
Heat Storm HS-1500-PHX-WIFI Infrared Wall Heater
This infrared wall heater offers Wi‑Fi control and a touch-screen thermostat for remote temperature management. The unit is designed to save floor space and includes standard safety features like tip-over shutoff and overheat protection (note: tip-over applies to some freestanding models; verify wall-mounted specs for installation).
- Infrared Heating: Infrared elements heat objects and occupants directly rather than just warming air.
- Smart Connectivity: Wi‑Fi control via app and included remote for scheduling and temperature adjustments.
- Space Saving: Wall-mounted design keeps floor clear — useful in smaller apartments.
- Best For: Users who want direct radiant heat and remote access without a large fan-driven airflow.
Broan-NuTone 9815WH High Capacity Wall Heater
The Broan-NuTone 9815WH is a reliable electric wall heater with a front-mounted adjustable thermostat. It operates at 1500W and can be configured for 120V or 240V wiring depending on installation needs.
- Simplified Controls: Built-in adjustable thermostat provides straightforward control without external electronics.
- Versatile Wiring: Can be wired for 120V/1500W or converted to 240V for higher-voltage circuits.
- Design And Maintenance: Contemporary grille styling and permanently lubricated motor for low maintenance.
- Best For: Installations that require a durable, low-maintenance heater with a simple thermostat and flexible wiring options.
Buying Guide: How To Choose An Apartment Wall Heater
Selecting the right wall heater for an apartment involves understanding space needs, electrical limits, safety expectations, and local rules. Use the checklist and comparison points below to evaluate options.
Call 888-896-7031 for Free Local HVAC Quotes – Compare and Save Today!
1. Determine Heating Requirements
Measure the room square footage and ceiling height. For small rooms (under 150 sq. ft.) a 500–1000W unit may suffice. Standard wall heaters tend to be 1500W for single rooms; through-wall AC units are rated in BTUs for larger coverage. Match capacity to room size to avoid under- or over-powered systems.
2. Electrical Supply And Installation
Confirm available circuit type and amperage. Many electric wall heaters use standard 120V circuits at 1500W, but larger AC/heater combos may require 230V/20A dedicated outlets. Check building rules and get landlord approval if required. Professional installation is recommended for hardwired units.
3. Heater Type And Heat Delivery
- Convection & Fan-Heaters: Warm the air and distribute it with a fan. Good for quick, even room warming.
- PTC Ceramic: Rapid warm-up, built-in safety characteristics, and often quieter operation.
- Infrared/Radiant: Heat objects directly—effective for focused warmth and typically silent.
- Through-Wall AC With Supplemental Heat: Adds cooling capability; ensure supplemental heat is suitable for your climate.
4. Controls And Smart Features
Consider programmable thermostats, app/voice controls, timers, and precise temperature setpoints. Smart controls add convenience and can enable energy savings through scheduling and remote monitoring, but verify Wi‑Fi compatibility and any ongoing account requirements.
5. Safety Features
- Overheat Protection: Essential to prevent excessive operating temperatures.
- Tip-Over Switch: Relevant only to freestanding units; wall models rely on secure mounting.
- IP Ratings: IP24 or higher indicates moisture resistance suitable for bathrooms or damp areas.
6. Noise Level And Comfort
Check decibel ratings for units where quiet operation matters (bedrooms, offices). Oscillation and fan speeds affect distribution and perceived comfort; PTC units often provide steady warm airflow with lower noise.
7. Space And Aesthetics
Wall-mounted units save floor space and can be less obtrusive than freestanding heaters. Consider grille style and finish if appearance matters in open living areas.
8. Energy Efficiency And Operating Cost
Compare wattage and thermostatic controls. Programmed thermostats, ECO modes, and zone heating (heating only occupied rooms) help manage energy use. For mixed cooling/heating units, consider seasonal efficiency ratings where available.
9. Maintenance And Reliability
Look for units with sealed motors or low-maintenance designs. Replaceable filters, accessible grills for cleaning, and proven brand support can simplify upkeep over the unit lifetime.
10. Building Regulations And Landlord Rules
Confirm whether through-wall or hardwired installations are permitted by your lease or building management. Portable or plug-in wall-mounted options may be preferred in strict rental situations.
Comparison Perspectives
Tips for Getting the Best HVAC Prices
- Prioritize Quality Over Cost
The most critical factor in any HVAC project is the quality of the installation. Don’t compromise on contractor expertise just to save money. - Check for Rebates
Always research current rebates and incentives — they can significantly reduce your overall cost. - Compare Multiple Quotes
Request at least three estimates before making your choice. You can click here to get three free quotes from local professionals. These quotes include available rebates and tax credits and automatically exclude unqualified contractors. - Negotiate Smartly
Once you've chosen a contractor, use the proven strategies from our guide — How Homeowners Can Negotiate with HVAC Dealers — to get the best possible final price.
- Smart Control Emphasis: Dreo WH719S and Dreo IP24 — strong app and voice integration for scheduled heating and remote control.
- Quiet, Energy-Conscious Operation: Dreo IP24 — low noise levels and ECO mode for efficient steady warmth.
- Combined Cooling & Heating: Keystone 14,000 BTU — suitable when cooling is also needed for large spaces, but requires 230V.
- Radiant Heat Preference: Heat Storm Infrared — direct radiant warmth and Wi‑Fi control for hands-off management.
- Simple, Durable Workhorse: Broan-NuTone 9815WH — straightforward thermostat control and flexible wiring with minimal maintenance.