Best Bathroom Exhaust Fans With Heater and No Light

Choosing a bathroom exhaust fan with a heater but without integrated lighting helps keep installations simple while delivering targeted warmth and ventilation. Below is a quick comparison of five relevant models selected for performance, noise level, heater power, and installation flexibility.

Product	Key Feature	CFM / Heater
Broan‑NuTone Non‑Lit PowerHeat	Non‑lit heater + fan combo	80 CFM / 1300W
Panasonic WhisperWarm FV‑0511VH1	Variable CFM with PTC heater	50/80/110 CFM / 1600W
GROWNEER Exhaust Fan With Heater	Heater + smart modes (has light options)	110/160 CFM / adjustable heat
FLYINGFOX Powerful DC Motor Fan	High airflow DC motor (includes lighting)	Up To 180 CFM / heater option
WELNEK 4‑in‑1 Fan With 1800W Heater	High‑power heater, controller included (lighting present)	110 CFM / 1800W

Broan‑NuTone Non‑Lit PowerHeat Bathroom Exhaust Fan And Heater

Check Price on Amazon

Brand: Broan‑NuTone. This unit is designed as a non‑lit fan and heater combination for spaces up to about 75 sq. ft. It provides 80 CFM airflow and operates at around 1.5 sones for modest noise. The integrated 1300‑watt heater can run independently or with the fan to warm a bathroom quickly. The housing is galvanized steel to resist moisture and corrosion.

Installation is intended for standard ceiling mounting. Because the grille is a simple white finish, it integrates with most decor. The independent controls for the fan and heater allow flexibility for ventilation without heat or heating without continuous ventilation.

Panasonic WhisperWarm Ceiling Mount Exhaust Fan With Heater

Check Price on Amazon

Brand: Panasonic. The WhisperWarm model pairs a 1600W PTC heater with a DC/ECM motor and Pick‑A‑Flow settings (50 / 80 / 110 CFM). This makes it versatile for smaller or mid‑sized bathrooms and helps match ventilation to room size and noise preferences.

The unit emphasizes quiet operation and energy efficiency, and the quick‑mount bracket can simplify retrofit installs without attic access. Choose this model if you want selectable airflow and a robust heater controlled independently from the fan.

GROWNEER Bathroom Exhaust Fan With Heater And Smart Modes

Check Price on Amazon

Brand: GROWNEER. This model includes a heater with two adjustable temperature settings and a smart shower mode that runs heat for 60 minutes followed by 15 minutes of ventilation. Airflow options reach 110/160 CFM with about 1.0 sone noise at lower speeds.

While this unit includes integrated lighting and audio features, its heater and ventilation capabilities are significant. The smart shower mode helps reduce lingering humidity after use. Consider this option if you want advanced timed heating and stronger airflow but note it does include light features in addition to heat.

FLYINGFOX Bathroom Exhaust Fan With DC Motor And Heater Option

Check Price on Amazon

Brand: FLYINGFOX. Equipped with a DC brushless motor, this fan can deliver airflow up to 180 CFM, making it suitable for larger bathrooms. The product highlights a durable cast iron casing and a stainless steel grille that tolerates higher temperatures.

The model combines strong ventilation with an available heater function and includes LED lighting and a nightlight. If your priority is maximum moisture removal and rapid drying, this higher‑CFM option is suitable. Remember it also integrates lighting components.

WELNEK 4‑In‑1 Bathroom Exhaust Fan With 1800W Heater

Check Price on Amazon

Brand: WELNEK. This model features a high‑power 1800W heater for rapid warming and an exhaust fan rated at 110 CFM with low noise around 1.0 sone. It ships with a controller and has a 13.8″ panel with a cutout specification for ceiling mounting.

Although it is a multi‑function unit including LED lighting, the standout is the strong heater capacity for very cold bathrooms. Installers should verify cutout dimensions and duct size before purchasing to ensure proper fit during retrofit or new construction installs.

Buying Guide: Choosing A Bathroom Exhaust Fan With Heater (No Light Focus)

Selecting the right fan‑heater combo involves matching performance to room size, installation constraints, noise tolerance, and safety features. Below are the primary considerations and comparison perspectives to guide your decision.

1. Room Size And CFM Requirements

Calculate bathroom size (length × width). A common guideline is CFM ≥ 1 per square foot for standard bathrooms. For a 75 sq. ft. bathroom, an 80–110 CFM fan is typical. Larger spaces or tubs may benefit from 160–180 CFM units.

2. Heater Wattage And Warm‑Up Speed

Heater wattage determines how quickly a unit raises the air temperature. Typical ranges in these models are 1300W to 1800W. Higher wattage heats faster but may require a dedicated circuit or specific wiring. Check electrical requirements before purchase.

3. Noise Level (Sones)

Noise is measured in sones. Lower numbers are quieter: around 1.0–1.5 sones is considered quiet. Choose lower sones if you want minimal noise during use or for night‑time bathrooms.

4. Independent Controls And Modes

Look for independent fan and heater controls or programmable modes like timed ventilation or “shower mode.” These add flexibility: heat for a short period and then ventilate to clear humidity.

5. Energy Efficiency And Motor Type

DC/ECM motors are typically more efficient and quieter than standard AC motors. Energy‑Star certified fans save power and often include longer‑life motors.

6. Installation Type And Retrofit Ease

Consider whether you have attic access. Models with fast‑mount brackets or no‑cut roomside installation simplify retrofits. Confirm housing dimensions and duct size (typically 4″ or 6″) before buying.

7. Safety Features

Important safety features include thermal cutoff fuses for heaters and moisture‑resistant housings. Confirm the heater design uses self‑limiting elements (PTC or thermal cutoff) to prevent overheating.

8. Presence Or Absence Of Integrated Lighting

Your keyword preference is no light. If you want a unit without lights, focus on models described explicitly as non‑lit or without light/LED components. Several multifunction models include lights and other features—verify product images and specs.

9. Ducting And Airflow Path

Ensure your home can support required ducting for the selected CFM. Higher CFM needs larger ducts and shorter runs to maintain performance. Long duct runs, elbows, or undersized ducts reduce effective airflow.

10. Durability And Corrosion Resistance

Look for galvanized steel housings or cast iron elements in high‑humidity environments. Corrosion‑resistant grilles and housings increase longevity, especially near showers and tubs.

Comparison Perspectives

• Quiet & Efficient: Choose DC motor models or Energy‑Star units for low sones and lower energy use.
• Powerful Heating: Higher wattage (1600–1800W) models heat faster; confirm wiring capacity.
• Simple, No Light Install: Select explicitly non‑lit models like the Broan‑NuTone PowerHeat if you want no integrated lighting.
• Multi‑Function vs. Single‑Function: Multi‑function units add features but may include lights; single‑function heater/fan combos minimize extras.
• Retrofit Ease: Pick models with fast‑mount brackets for attic‑less installation when retrofitting existing ceilings.

Before purchasing, cross‑check product specifications, electrical requirements, and installation instructions to ensure compatibility with your bathroom layout and local electrical codes.