The following guide compares top bathroom radiant heating solutions including floor heating mats, a combination fan/heater, and systems with programmable thermostats. Each option is selected for safety features, coverage size, and installation flexibility to help you choose the right radiant solution for your bathroom.
| Product | Type | Coverage |
|---|---|---|
| BLARALA Electric Radiant Floor Heating System | Floor Heating Mat + Thermostat | 20 sq. ft. |
| LuxHeat 20sqft Floor Heating Mat Kit | Floor Heating Mat + Thermostat | 20 sq. ft. |
| LuxHeat 30sqft Floor Heating Mat Kit | Floor Heating Mat + Thermostat | 30 sq. ft. |
| LuxHeat 50sqft Floor Heating Mat Kit | Floor Heating Mat + WiFi Thermostat | 50 sq. ft. |
| Broan-NuTone BHFLED80 PowerHeat | Exhaust Fan + Heater + Light | Room heating with 80 CFM exhaust |
Content Navigation
- BLARALA Electric Radiant Floor Heating System, 20 Sq.ft
- LuxHeat 20sqft Floor Heating Mat Kit – 120v
- LuxHeat 30sqft Floor Heating Mat Kit – 120v
- LuxHeat 50sqft Floor Heating Mat Kit – 120v WiFi Thermostat
- Broan-NuTone BHFLED80 PowerHeat Bathroom Exhaust Fan, Heater, and LED Light
- Buying Guide: How To Choose The Right Bathroom Radiant Heater
BLARALA Electric Radiant Floor Heating System, 20 Sq.ft
The BLARALA 20 sq. ft. kit is a complete electric heated floor mat system designed for tile, laminate, and similar floor coverings. It includes a programmable thermostat with dual sensors (air/floor), cable monitor/alarm, and floor heating mat sized for typical bathroom areas.
- Programmable Thermostat with GFCI detection, four operating modes, child lock, and overheat protection.
- Safety Features: CSA-certified cables, installation alarm, and sensors suitable for wet locations.
- Installation Notes: Intended for embedding under tile or thinset; follow manufacturer instructions regarding underlayment and sensor placement.
For bathrooms where dedicated radiant floor comfort and safety controls are priorities, this kit provides an integrated thermostat and protective monitoring components to meet common installation needs.
LuxHeat 20sqft Floor Heating Mat Kit – 120v
The LuxHeat 20 sq. ft. kit focuses on ease of installation and long-term reliability. It pairs a self-adhesive heating mat with a programmable UDG thermostat that includes a floor sensor and built-in GFCI for ground fault protection.
Call 888-896-7031 for Free Local HVAC Quotes – Compare and Save Today!
- Self-Adhesive Mat: 3″ pre-spaced mesh that can be cut and turned (not the heating wire).
- UDG Programmable Thermostat: Floor sensor included; intended for tile, laminate, and similar surfaces.
- Warranty & Experience: Backed by long-standing manufacturer support and a limited warranty for material assurance.
This kit suits homeowners seeking a recognized brand kit with straightforward mat handling and established support resources for installation questions and warranty coverage.
LuxHeat 30sqft Floor Heating Mat Kit – 120v
The LuxHeat 30 sq. ft. option scales up coverage for larger bathrooms or combined toilet/shower areas. The kit uses the same mesh mat approach and includes the UDG4 programmable thermostat with built-in GFCI and sensor alarm.
- Larger Coverage: Better for master baths or layouts with more floor area to heat.
- Installation Flexibility: Mat can be turned or flipped; heating wire must remain intact and embedded in underlayment.
- Controls: Programmable thermostat allows schedule and temperature control with floor sensing for accurate comfort.
Choose this kit when coverage needs exceed small-bath footprints and when thermostat-based scheduling and sensor feedback are required for efficient operation.
LuxHeat 50sqft Floor Heating Mat Kit – 120v WiFi Thermostat
The LuxHeat 50 sq. ft. kit is intended for large bathrooms, basement suites, or open-plan floor heating. It adds a WiFi-capable programmable thermostat with GFCI, enabling remote scheduling and monitoring via smartphone.
Call 888-896-7031 for Free Local HVAC Quotes – Compare and Save Today!
- WiFi Thermostat: Remote control, scheduling, and potential energy management through app connectivity.
- Large Coverage: Suitable for more extensive layouts; uses same self-adhesive mat system.
- Installation & Safety: Includes cable monitor/alarm and built-in GFCI for protection against electrical faults.
This option is appropriate if you want broader coverage and modern control features like remote programming, useful for energy savings and preheating before arrival.
Broan-NuTone BHFLED80 PowerHeat Bathroom Exhaust Fan, Heater, and LED Light
The Broan-NuTone BHFLED80 provides a combined exhaust fan, heater, and LED light. It is an airflow-based heating solution rather than an embedded radiant floor system but can deliver rapid warm-air comfort during bathroom use.
- Multi-Function: Exhaust fan (80 CFM), integrated heater, and dimmable LED light with selectable color temperatures.
- Quiet Operation: Rated at 1.5 sones for low sound levels during operation.
- Independent Controls: Fan, light, and heater can operate independently to match usage patterns.
This product fits bathrooms where quick warm-air comfort and moisture control are needed without the complexity of underfloor installation. It’s a ceiling-mounted option that complements or replaces dedicated radiant floor systems depending on user goals.
Buying Guide: How To Choose The Right Bathroom Radiant Heater
Selecting a bathroom radiant heater depends on space, installation scope, safety needs, and control preferences. Below are key points to evaluate across solutions.
Heating Type And Comfort Profile
- Electric Radiant Floors: Deliver steady, even warmth from the floor surface. Best for persistent comfort and reducing cold-floor shock after showers.
- Ceiling/Wall Heaters And Fan-Heaters: Provide rapid warm-air blasts and often combine ventilation and lighting. Good for intermittent use and quick preheating.
- Localized Heated Fixtures: Heated toilet seats and towel warmers give spot comfort but do not heat room air or floors substantially.
Coverage Size And Output
- Match mat square footage to the heated floor area; leave space for vanities or fixtures where mats cannot be installed.
- Consider wattage per square foot (commonly around 10–15 W/sq. ft.) when estimating heating capability for colder climates or poorly insulated subfloors.
Controls And Scheduling
- Programmable Thermostats: Allow timed schedules and floor-sensor-based control for consistent comfort and energy savings.
- WiFi Thermostats: Enable remote preheating and integration with smart-home routines.
Safety Features And Certifications
- Look for built-in GFCI protection or an external GFCI circuit to guard against ground faults in wet environments.
- Cable monitors, alarms, and overheat protection add installation safety and early fault detection.
- Verify certifications (CSA, UL, or equivalent) for electrical components intended for wet locations.
Installation Considerations
- Under-Tile vs. Under-Laminate: Ensure the mat and thermostat are rated for the flooring type and that cables are embedded in a leveling or thinset layer as required.
- Access To Electrical Supply: Most kits are 120V and require a dedicated circuit and professional wiring if you are not experienced with electrical work.
- Ceiling Fan-Heaters: Require proper venting and mounting in joist bays; installation may be simpler than floor systems but still often needs electrician or HVAC skills for wiring.
Durability And Warranty
- Compare warranty lengths and what they cover (mat failure, thermostat malfunction, and monitoring components).
- Consider manufacturer reputation and customer support options for troubleshooting or replacement parts.
Energy Use And Operating Cost
- Radiant floors are often efficient at providing comfortable temperatures at lower thermostat setpoints because heat is delivered where people contact the floor.
- Fan heaters can use high instantaneous wattage but for shorter durations; thermostatic control minimizes wasted energy.
- Programmable or WiFi thermostats allow preheating only when needed, reducing continuous operation.
Comparison Perspectives
- Best For Full Bath Comfort: Floor heating kits sized to cover the primary floor area (20–50 sq. ft.) provide durable, even warmth.
- Best For Quick Warmth: Ceiling fan-heater combos deliver rapid warm air and remove moisture simultaneously.
- Best For Smart Control: Kits with WiFi thermostats or programmable controls enable preheating and energy-aware scheduling.
- Best For DIY-Friendly Install: Self-adhesive mats with clear sensor placement and included GFCI thermostats simplify homeowner installation, though electrical connection may still require a professional.
When comparing specific kits, weigh coverage size, thermostat type, safety certifications, and installation complexity. For larger layouts, choose higher square-foot kits. For spot comfort or ventilation needs, consider ceiling-mounted fan-heater combinations.
Tips for Getting the Best HVAC Prices
- Prioritize Quality Over Cost
The most critical factor in any HVAC project is the quality of the installation. Don’t compromise on contractor expertise just to save money. - Check for Rebates
Always research current rebates and incentives — they can significantly reduce your overall cost. - Compare Multiple Quotes
Request at least three estimates before making your choice. You can click here to get three free quotes from local professionals. These quotes include available rebates and tax credits and automatically exclude unqualified contractors. - Negotiate Smartly
Once you've chosen a contractor, use the proven strategies from our guide — How Homeowners Can Negotiate with HVAC Dealers — to get the best possible final price.