Best Campervan Heater 12V: Top Diesel Air Heaters for Vans

Choosing a reliable 12V campervan heater helps keep your van, RV, or boat warm on cold nights. Below is a concise comparison of five popular diesel air heaters selected for 12V systems, varied power ratings, fuel tank sizes, and control options to suit different van layouts and heating needs.

Product Power Fuel Tank Controls
VEVOR Diesel Air Heater 5KW (10L) 5 KW 10 L Remote, LCD
WIPPRO Diesel Heater 8KW All-In-One 8 KW 7 L Remote, LCD, 110V Option
Triclicks Diesel Air Heater 5KW-8KW (10L) 5–8 KW 10 L Remote, LCD
VEVOR Diesel Air Heater 8KW One Outlet 8 KW — (All-in-one) Remote, Red LCD
Roomark All-In-One Diesel Heater 5KW (5L) 5 KW 5 L LED, Remote

VEVOR Diesel Air Heater 5KW With 10L Tank

VEVOR Diesel Air Heater 5KW 10L

Check Price on Amazon

This VEVOR unit is a 5 KW 12V/24V diesel air heater designed for camper vans, boats, and cabins. It uses a sandblasting aluminum heat exchanger for faster heat transfer and claims to warm typical small to mid-size spaces within 10 minutes. The included 10 L fuel tank supports extended runtime, and the low-noise fuel pump is tuned for low fuel consumption (listed 0.16–0.52 L/h). The package includes a long-range remote and an LCD for temperature adjustment between 46 °F and 96.8 °F, plus options like preheat and engine warming. Installation may require routing exhaust and air ducts when used permanently.

WIPPRO Diesel Heater 8KW All-In-One With 110V Option

WIPPRO Diesel Heater 8KW

Check Price on Amazon

The WIPPRO model is an 8 KW all-in-one diesel heater that supports 12V and 24V vehicle power and includes a 110V transformer for plug-in operation. Its sandblasted aluminum heat exchanger provides efficient heat transfer, and the unit offers thermostatic control, timing, preheating, and built-in overheating protection. Fuel consumption is stated at roughly 0.16–0.62 L/h, with a 7 L tank giving long run times. The all-in-one format simplifies setup for temporary or semi-permanent use but still requires planning for exhaust routing if used continuously in an enclosed space.

Triclicks Diesel Air Heater 5KW–8KW With Silencer

Triclicks Diesel Air Heater

Check Price on Amazon

Call 888-896-7031 for Free Local HVAC Quotes – Compare and Save Today!

Triclicks offers a flexible heater available in 5KW to 8KW ranges with a 10 L tank option and silencer accessories to reduce operational noise. The device is marketed for a wide range of vehicle types and indoor uses, and the manufacturer notes that smaller rooms heat faster while larger spaces can require multiple units for even temperature distribution. It features low emissions, low fuel consumption, and an LCD with remote control for monitoring and setting temperature, fuel, and power parameters.

VEVOR Diesel Air Heater 8KW Single Outlet

VEVOR 8KW Diesel Heater

Check Price on Amazon

This VEVOR 8KW unit is a plateau-capable diesel heater built for extreme conditions and high altitude operation. Rated for -40°C to +50°C environments and engineered to heat quickly (claims warming within 10 minutes), it emphasizes engine preheating and fast defrosting of windows. Fuel consumption figures indicate high efficiency (0.1–0.24 L/h under listed conditions), and the oil pump design aims to reduce vibration and noise. The single air outlet focuses warm air delivery to a concentrated area, which suits smaller camper layouts or single-zone heating schemes.

Roomark All-In-One 5KW Diesel Heater With LED Control

Roomark 5KW Diesel Heater

Check Price on Amazon

The Roomark model is a compact 5KW all-in-one diesel parking heater with a 5 L fuel tank and a suite of control features, including a timer, pre-heating, constant temperature control, and voice alerts. Fuel consumption is listed at roughly 0.16–0.52 L/h, and the device touts a precision low-noise pump for quieter operation. The LED control plus remote allow preheating and in-vehicle adjustments. This unit is aimed at users who prefer a balance of runtime and a smaller footprint for tight campervan installations.

Buying Guide: How To Choose A 12V Campervan Heater

Heating Power And Space Size

Match heater capacity (KW) to the interior volume. Typical guidance: 5 KW units are often sufficient for small to medium campervans and insulated vans; 8 KW suits larger vans, multi-zone layouts, or poorly insulated spaces. Consider mattress areas, headspace, and insulation when estimating required output.

Call 888-896-7031 for Free Local HVAC Quotes – Compare and Save Today!

Fuel Tank Capacity And Runtime

Larger tanks provide longer runtime without refilling. A 10 L tank offers extended autonomy for remote trips; 5–7 L tanks are lighter and fit compact installs but require more frequent refills. Calculate expected runtime using manufacturer fuel-consumption ranges and your typical duty cycle.

Installation Type: All-In-One Vs. Installed Unit

All-in-one units simplify setup and are often installation-free for temporary use. Hard-mounted systems with separate components can be quieter, more permanent, and allow custom ducting. Factor in space for exhaust routing, fresh-air intake, and fuel tank placement.

Noise, Vibration, And Sleep Comfort

Look for low-noise fuel pumps, silencer accessories, and vibration-reducing mounts. If you sleep in the same cabin, noise level and pump vibration are key for comfort. Compare user reports and product specs where available.

Controls And Convenience Features

Remote controls, LCD/LED panels, timers, thermostatic control, app/Bluetooth options, and 110V adaptors add convenience. Remote preheating is useful for warming the van before entry; app control increases flexibility from a distance.

Fuel Efficiency And Emissions

Compare listed fuel consumption ranges to estimate nightly fuel use. Lower consumption values reduce operating cost and extend range. Verify combustion efficiency claims and whether the unit features low-emission operation for enclosed or semi-enclosed use.

Altitude And Extreme Temperature Performance

If you travel at high elevations or in extreme cold, verify manufacturer claims about high-altitude functioning and minimum operating temperatures. Some heaters are rated for use at several thousand meters or very low ambient temperatures.

Safety Features And Protections

Priority safety features include overheating protection, overcurrent protection, and self-diagnostic modes. Units listing auto-shutdown on fault, temperature limits, or combustion protections reduce risk during unattended operation.

Installation Considerations And Venting

Plan exhaust and intake routing to avoid fumes entering occupied spaces. Permanent installs require secure mounting, sealed ducting, and compliant exhaust exits. All-in-one portable units may still need safe exhaust placement and secure fuel mounting for transport.

Comparison Perspectives

  • Performance-Focused: Choose higher KW and larger tank for quick warm-up and longer runtime in larger vans.
  • Compact/Lightweight: Opt for 5 KW all-in-one with smaller tank for minimal footprint and easier storage.
  • Convenience-Oriented: Prioritize remote, LCD/app controls, and timers for automated preheating.
  • Extreme Conditions: Select units rated for low temp and high altitude operation with robust safety systems.

Maintenance And Parts

Regular maintenance includes checking fuel lines, filters, exhaust path, and electrical connections. Choose models with accessible spare parts and documented service procedures. Availability of replacement silencers, pumps, and controller modules matters for long-term ownership.

Tips for Getting the Best HVAC Prices

  1. Prioritize Quality Over Cost
    The most critical factor in any HVAC project is the quality of the installation. Don’t compromise on contractor expertise just to save money.
  2. Check for Rebates
    Always research current rebates and incentives — they can significantly reduce your overall cost.
  3. Compare Multiple Quotes
    Request at least three estimates before making your choice. You can click here to get three free quotes from local professionals. These quotes include available rebates and tax credits and automatically exclude unqualified contractors.
  4. Negotiate Smartly
    Once you've chosen a contractor, use the proven strategies from our guide — How Homeowners Can Negotiate with HVAC Dealers — to get the best possible final price.

Final Selection Checklist

  1. Estimate interior volume and match KW accordingly.
  2. Decide between all-in-one portability or permanent install.
  3. Confirm fuel tank size vs. desired runtime.
  4. Review control features and noise specs for comfort.
  5. Verify safety features and altitude/temperature ratings.

Leave a Comment