Electric baseboard heaters rated for 110–120 volts are common for room-specific heating, offering straightforward installation and zoned temperature control. Below is a quick comparison table of the five selected Amazon products that suit 110–120V circuits, followed by objective descriptions and a detailed buying guide.
| Product | Type | Voltage | Wattage | Key Feature |
|---|---|---|---|---|
| Cadet F Series 36″ (3F750-1W) | Baseboard Heater | 120V | 750W | All Metal Construction; Thermostat Required |
| Cadet F Series 48″ (4F1000-1W) | Baseboard Heater | 120V | 1000W | Fast Heating; Pre-punched Casing Holes |
| KING 4K1210BW K Series 4′ / 1000W | Baseboard Heater | 120V | 1000W | Aluminum Ribbon Fin; Full-Length Safety Cutout |
| Cadet Com-Pak CSC151TW | Wall/Room Heater With Thermostat | 120V | 1500W | Integrated Thermostat; Complete Unit |
| YeloDeer Dual Voltage Manual Thermostat | Thermostat For Baseboard | 110–265V | Up To 2400W @120V | Electronic Accuracy; 4.4–26.7°C Range |
Content Navigation
- Cadet F Series 36″ Electric Baseboard Heater (3F750-1W)
- Cadet F Series 48″ Electric Baseboard Heater (4F1000-1W)
- KING 4K1210BW K Series Baseboard Heater 4′ / 1000W
- Cadet Com-Pak Electric Wall Heater Complete Unit (CSC151TW)
- YeloDeer Dual Voltage Manual Thermostat For Baseboard
- Buying Guide: How To Choose A 110–120V Electric Baseboard Heater
Cadet F Series 36″ Electric Baseboard Heater (3F750-1W)
The Cadet 36″ model is a 120V, 750W baseboard heater designed for smaller rooms or supplemental heating. Construction uses 25 gauge steel with a 20 gauge junction box and a powder-coated finish.
Features listed include a requirement for a separate thermostat, all-metal construction, and grounded junction box hardware. The design supports hard-wiring into a dedicated circuit and is intended for fixed installation rather than plug-in use.
This unit emphasizes durability and basic functionality. The absence of an included thermostat means users must choose a compatible control to match desired temperature control and wiring limits.
Cadet F Series 48″ Electric Baseboard Heater (4F1000-1W)
Call 888-896-7031 for Free Local HVAC Quotes – Compare and Save Today!
The Cadet 48″ model is a 120V, 1000W baseboard heater intended for small to medium-sized rooms. It lists fast heating performance and quiet operation for zonal heating.
Key features include pre-punched 1″ casing holes and universal wiring at either end to simplify installation. The heater is sheathed in protective steel for optimized heat transfer and long-term durability.
The product listing notes that a thermostat is not included and must be provided separately. This model is presented as a straightforward hard-wired heater appropriate for retrofit or new construction baseboard circuits.
KING 4K1210BW K Series Baseboard Heater 4′ / 1000W
The KING K Series 4′ baseboard is a 120V, 1000W hard-wired heater using an aluminum ribbon fin element for heat transfer. The unit is not a plug-in model and requires fixed wiring.
Listed features stress safety and durability: an aluminum ribbon fin element for efficient heat distribution and a full-length safety cutout to limit overheating. The unit is described as bright white and sized to standard 4-foot baseboard installations.
Call 888-896-7031 for Free Local HVAC Quotes – Compare and Save Today!
Specifications indicate standard hard-wiring practices. This model is focused on traditional baseboard heater construction with built-in safety cutouts for fault protection.
Cadet Com-Pak Electric Wall Heater Complete Unit (CSC151TW)
The Cadet Com-Pak is a complete wall heater unit with integrated thermostat, rated at 120V, 1500W. While it is a wall-mounted unit rather than a trim-base baseboard, it serves the same room-level electric heating purpose for 120V circuits.
The listing highlights a built-in thermostat and a fully packaged unit intended for direct wall installation. This can be advantageous where a pre-set thermostat and compact footprint are desired without separate controls.
As a complete system, the Com-Pak removes the need to purchase a separate wall thermostat, but installation still requires adherence to local electrical codes and correct wiring for a 120V branch circuit.
YeloDeer Dual Voltage Manual Thermostat For Baseboard
The YeloDeer thermostat is an electronic manual control rated for 110–265V and suitable for 120V baseboard heaters. It supports up to 20 amps2400W at 120V
Featured capabilities include improved temperature accuracy40°F to 80°F (4.4–26.7°C). It accepts up to 12 AWG wiring and carries CE/UKCA marks per the listing.
As a control device, the thermostat can enable precise zone control for single heater circuits. Compatibility checks with the heater’s amperage and wiring configuration are necessary prior to installation.
Buying Guide: How To Choose A 110–120V Electric Baseboard Heater
This buying guide reviews the essential factors to evaluate when selecting a 110–120V baseboard heater for American homes.
Heating Capacity And Room Size
- Wattage-to-Square-Foot Rule: A general guideline is about 10 watts per square foot for reasonable insulation; a 1000W heater typically supports roughly 100 square feet in average conditions. Adjust for local climate and insulation.
- Multiple Units: For larger rooms, consider multiple baseboard units or higher total wattage across separate circuits to maintain even temperature distribution.
Voltage, Amperage, And Circuit Requirements
- 120V Circuits: Most listed models are 120V and designed for fixed wiring. Confirm the circuit breaker and wire gauge meet the heater’s amperage requirements.
- Amperage Limits: A 1000W heater at 120V draws about 8.3 amps; a 1500W unit draws 12.5 amps. Ensure the branch circuit capacity and wiring (typically 14 AWG for up to 15A, 12 AWG for 20A) match local code.
- Thermostat Compatibility: Many baseboards require a separate line-voltage thermostat. If the unit lacks a thermostat, add a compatible 120V-rated control like the YeloDeer electronic thermostat.
Installation And Wiring Considerations
- Hard-Wired vs Plug-In: Most in-wall baseboards are hard-wired and not plug-in. Plan for permanent installation and route wiring per code.
- End-to-End Wiring: Look for models with pre-punched holes and universal wiring at either end to ease connections and chaining multiple units.
- Location: Baseboard units require clearances from drapes and furniture; wall heaters require proper mounting and unobstructed airflow.
Safety Features And Build Quality
- Overheat Protection & Cutouts: Choose units with thermal cutouts or full-length safety cutouts to reduce fire risk.
- Construction Materials: Steel casing and aluminum ribbon fins are common; steel housings resist impact, and aluminum fins improve heat transfer.
- Certifications: Look for UL/ETL or equivalent product/listing certifications in the product details and compliance with local building codes.
Controls And Thermostat Options
- Line-Voltage Thermostats: Mechanical vs electronic thermostats differ in accuracy. Electronic thermostats (like the YeloDeer) typically provide tighter temperature control.
- Built-In vs External: Some heaters include thermostats (Wall units like Cadet Com-Pak); others require separate controls. Integrated units simplify installation but limit thermostat placement flexibility.
Energy Efficiency And Operation
- Convection vs Radiation: Baseboards primarily use convection; quality fins and casing materials affect heat distribution efficiency.
- Zone Control: Use individual thermostats per room to reduce overall energy consumption by heating only occupied spaces.
Durability, Maintenance, And Aesthetics
- Finish And Corrosion Resistance: Powder-coated steel and galvanized components resist rust in humid environments.
- Cleanability: Smooth louvers and accessible fins make dust removal easier; consider covers if aesthetics are important, ensuring they don’t obstruct airflow.
- Repairability: Standardized parts and junction boxes simplify future service and replacements.
Comparison Perspectives
- Single Unit Performance: Compare wattage and listed BTU output relative to room size; Cadet 1000W and KING 1000W models are similar in output for 4′ installations.
- Complete Systems vs Component Purchases: Complete units with thermostats (Cadet Com-Pak) minimize additional component selection, while separate heaters plus thermostats provide more flexibility in control placement.
- Safety Trade-Offs: Built-in safety cutouts and verified construction may provide extra reassurance, while economical units require careful adherence to installation guidelines.
When selecting a 110–120V baseboard heater, prioritize correct sizing for your room, verify circuit capacity and wiring, and choose appropriate thermostat control. Evaluate safety features and build materials to match your installation environment and maintenance preferences.
Tips for Getting the Best HVAC Prices
- Prioritize Quality Over Cost
The most critical factor in any HVAC project is the quality of the installation. Don’t compromise on contractor expertise just to save money. - Check for Rebates
Always research current rebates and incentives — they can significantly reduce your overall cost. - Compare Multiple Quotes
Request at least three estimates before making your choice. You can click here to get three free quotes from local professionals. These quotes include available rebates and tax credits and automatically exclude unqualified contractors. - Negotiate Smartly
Once you've chosen a contractor, use the proven strategies from our guide — How Homeowners Can Negotiate with HVAC Dealers — to get the best possible final price.