Best Electric Floor Heaters for Tile and Laminate Floors

Electric floor heating can add comfort and efficient zone control to bathrooms, kitchens, and basements. The table below summarizes five prominent kits designed for tile and similar floor coverings, each including heating elements and a thermostat or monitor.

Product	Coverage	Includes	Best For
LuxHeat 20sqft Floor Heating Mat Kit	20 sq ft	Mat, Alarm, UDG Thermostat w/ GFCI & Sensor	Small rooms, tile & laminate
LuxHeat 50sqft Floor Heating Mat Kit	50 sq ft	Mat, Alarm, UDG4 Thermostat w/ GFCI & Sensor	Medium rooms, larger layouts
Warming Systems 15sqft Heating Mat	15 sq ft	Mat, Programmable Thermostat, Monitor	Small bathrooms, compact areas
BLARALA 20sqft Electric Heated Floor Mats	20 sq ft	Mat, Thermostat, Monitor, Dual Sensors	Wet locations, dual-sensor control
LuxHeat 150sqft Radiant Floor Heating System	150 sq ft	Cable, Membrane, Thermostat, Sensor & Alarm	Whole-room, tiled installations with uncoupling

LuxHeat 20sqft Floor Heating Mat Kit

Check Price on Amazon

This kit is a self-adhesive 3″ pre-spaced heating mat designed for installations under tile, laminate and similar surfaces. The bundle includes a programmable UDG thermostat with a built-in GFCI and a flooring sensor, plus a cable monitor alarm to detect damage during installation.

Installation flexibility is emphasized: the mat can be cut and turned (but not the red heater wire). Wires must be embedded in thinset or self-leveling underlayment. The manufacturer provides a 25-year limited warranty and positions the kit for ease of install in smaller rooms where a 120V supply is available.

LuxHeat 50sqft Floor Heating Mat Kit

Check Price on Amazon

The 50 sq ft mat kit uses the same pre-spaced 3″ heating mat design and includes a UDG4 programmable thermostat with floor sensor and built-in GFCI. It also ships with a cable monitor alarm for installation protection.

This kit is intended for medium-sized rooms and supports installation under tile and laminate. The mat adheres to subfloor surfaces and must be fully embedded in thinset or self-leveling compound. The product highlights a 25-year limited warranty and decades of company experience in floor heating.

Warming Systems 15 Sqft Radiant Floor Mat

Check Price on Amazon

The Warming Systems kit includes a 15 sq ft mat rated at 12 watts per sq ft, a digital programmable thermostat (TH115-AF-120S), and an installation warning monitor. The mat is UL listed and rated safe for wet areas, and its 1/8″ thickness keeps build-up low.

The mat design allows flipping and turning to fit irregular areas; it adheres to subfloors via double-sided tape. With 120V operation and a 16 Amp-rated thermostat, the system suits small bathrooms or targeted heated zones where a compact, UL-listed mat is preferred.

BLARALA 20 Sq.ft Electric Heated Floor Mats

Check Price on Amazon

The BLARALA kit includes a 20 sq ft heating mat, a programmable thermostat with built-in GFCI detection, a cable monitor/alarm, and dual sensors (air and floor). It supports wet-location installations with CSA-certified cables and overheat protection features.

The thermostat offers multiple operating modes, child lock, and convenience-focused controls. The mat layout and adhesive backing are intended to simplify installation under tile and similar finishes. The dual-sensor approach provides additional sensing options for floor or ambient temperature control.

LuxHeat 150sqft Electric Radiant Floor Heating System

Check Price on Amazon

This large-area system is supplied as a heating cable with Prova Flex-Heat uncoupling membrane, plus a touchscreen programmable thermostat with integrated Class A GFCI, alarm, and floor sensor. The membrane provides uncoupling, waterproofing, and load support under tile.

The loose cable plus uncoupling membrane supports custom layouts in larger rooms and helps manage tile movement and waterproofing. As with other kits, heater cables must be embedded in thinset or self-leveler and must not be cut. The thermostat includes power logging, child lock and 7-day programmable scheduling.

Buying Guide: How To Choose An Electric Floor Heater

This guide highlights key factors to evaluate across kits, with comparative perspectives to help match the system to your project.

Coverage And Power Density

Match kit coverage to the heated area. Mats offer pre-spaced layouts for defined square footage, while loose cables allow custom layouts for irregular rooms or larger areas. Check watts per sq ft: typical values are 10–12 W/sq ft for general comfort, higher if used as primary heat.

Voltage And Circuit Requirements

Most kits here are 120V; some larger installs use 240V. Verify existing circuit capacity and required breaker/amperage. Thermostats often specify maximum amps supported—ensure compatibility with local electrical code and install by a qualified electrician when needed.

Thermostat Features & Sensors

Consider programmable thermostats with floor sensors for consistent surface temperature control. Dual-sensor thermostats (floor + air) offer more flexible control strategies. Built-in GFCI on the thermostat adds integrated ground-fault protection for wet areas.

Installation Method And Subfloor Compatibility

Mats adhere to subfloors and require embedding in thinset or self-leveling underlayment. Loose cables often use uncoupling membranes for tile. Check product instructions for whether the mat can be flipped/cut (never cut heating wire), and confirm thickness buildup for transitions to adjacent floors.

Safety Features And Listings

Look for UL, CSA, or cULus listings and integrated installation monitor alarms. Built-in GFCI thermostats and overheat protection reduce risk in wet areas such as bathrooms. Installation monitors detect wire damage during installation, limiting post-install issues.

Warranty And Manufacturer Support

Warranty length and manufacturer experience vary. Longer limited warranties (e.g., 25 years) can indicate confidence in component longevity. Verify what components are covered and any registration requirements.

Flooring Type And Thermal Needs

Tile and stone pair well with electric radiant mats and membranes. For laminate, ensure the flooring manufacturer approves in-floor electric heating and select lower surface temperatures. Calculate desired temperature rise and consider whether the system will be primary or supplemental heat.

Installation Complexity And Labor

Mats are often faster to install for uniform areas; loose cables and membrane systems require more layout and embedding work but provide flexibility. Factor professional labor for electrical and tile work if not experienced with wet-set installations.

Cost Of Operation And Zoning

Electric radiant performs best with targeted zoning. Use programmable thermostats to schedule heating, reduce runtime, and minimize operating costs. Power density and runtime determine energy use more than kit brand alone.

Comparison Perspectives

• Small Areas: Choose pre-sized mats (15–20 sq ft) with built-in thermostats and alarms for quick installs.
• Medium To Large Rooms: Larger mat kits (50 sq ft) or loose cable with membrane provide coverage and layout flexibility.
• Wet Areas: Prioritize CSA/UL listings, GFCI thermostats, and installation monitors.
• Custom Layouts: Loose cable + uncoupling membrane supports irregular shapes and whole-room heating.

When comparing kits, align coverage, thermostat capabilities, safety listings, and installation method to your room size and flooring type to select the most appropriate system.