Electric salamander heaters deliver powerful, direct heat for job sites, garages, and large workspaces. This guide compares five electric models that focus on portability, mounting options, power requirements, and safety features to help you match heater capacity and installation needs to your space.
| Product | Type | Power / Phase | Key Feature |
|---|---|---|---|
| Global Industrial Portable Electric Salamander Heater (480V, 30KW) | Portable Floor Unit | 30 kW / 3-Phase | 10″ wheels, 25′ cable |
| Global Industrial Portable Electric Salamander Heater (240V, 15KW) | Portable Floor Unit | 15 kW / Single-Phase | 10″ wheels, direct wire |
| DR. INFRARED DR-PS11024 Salamander Construction Heater | Portable Fan-Forced | 10,000 W / 240V Single-Phase | Steel frame, safety guards |
| Global Industrial Electric Wall Mount Salamander Heater | Wall/Ceiling Mounted | 15 kW / 3-Phase | Swivel mounting bracket, 25′ cord |
| Dura Heat EWH5510 Electric Forced Air Heater | Hard-Wired Garage Heater | 5,000 W / 240V | Remote control, thermostat |
Content Navigation
- Global Industrial 480V 30KW Portable Salamander
- Global Industrial 240V 15KW Portable Salamander
- DR. INFRARED DR-PS11024 10,000W Portable Salamander
- Global Industrial Wall Mount 240V 15KW Salamander
- Dura Heat EWH5510 Electric Forced Air Garage Heater
- Buying Guide: How To Choose An Electric Salamander Heater
Global Industrial 480V 30KW Portable Salamander
This portable electric salamander heater from Global Industrial supplies a high heat output suitable for large commercial spaces that accept a 480V three-phase feed. The unit is designed for direct wire installation and includes a 25′ power cable for placement flexibility. Ten-inch wheels facilitate movement on job sites.
Key electrical considerations: this model requires a 50 Amp circuit breaker and 3-phase wiring. The heavy-duty construction is appropriate for industrial use where continuous, high-output heating is needed. Because of the 3-phase requirement and high amperage, professional installation is recommended for code compliance and safe operation.
Global Industrial 240V 15KW Portable Salamander
This Global Industrial 240V, 15 kW portable salamander is a common choice where a single-phase 240V supply is available. The unit is built for direct wiring and offers 10″ wheels for transport and a 25′ cable for reach on site.
Call 888-896-7031 for Free Local HVAC Quotes – Compare and Save Today!
It specifies a 75 Amp circuit breaker, underscoring the need to check panel capacity and circuit protection before installation. The design supports temporary and semi-permanent site heating where robust electric heat is required without fuel combustion. Follow local electrical codes and consult an electrician when connecting to fixed wiring.
DR. INFRARED DR-PS11024 10,000W Portable Salamander
The DR. INFRARED DR-PS11024 offers 10,000 watts of instant, odor-free heat on 240V single-phase power. It features a heavy-duty steel frame and protective guards on both intake and output ends, reflecting attention to durability and operator safety.
Electrical requirements include a 55-Amp circuit breaker. This portable floor-mounted design targets construction zones and workshop areas that require quick, clean electric heat without combustion byproducts. The unit’s fan-forced delivery is intended to heat open spaces quickly, though positioning and airflow affect effective coverage.
Global Industrial Wall Mount 240V 15KW Salamander
This Global Industrial model is engineered for wall or ceiling installation via a swivel mounting bracket, enabling directional heat delivery without occupying floor space. It is a 15 kW heater designed for direct wire installation and ships with a 25′ 6/4 SO type power cord.
Call 888-896-7031 for Free Local HVAC Quotes – Compare and Save Today!
Because it mounts overhead, this unit suits workshops, warehouses, or service bays where permanent or semi-permanent installation is desired. Confirm mounting surface ratings and follow manufacturer instructions for clearances and electrical connections to meet safety and code requirements.
Dura Heat EWH5510 Electric Forced Air Garage Heater
The Dura Heat EWH5510 is an electric forced-air heater designed for garage and workspace heating. Rated at 5,000W/17,060 BTU, it covers moderate areas and requires a hard-wired 240V / 30A connection. The unit includes a remote control and adjustable thermostat for basic zone temperature management.
Installation is intended to be performed by a professional electrician. The EWH5510 focuses on manageable installation and user control features rather than the extreme output of larger salamanders. Consider this model when lower wattage, remote-adjustable heat, and a thermostat are priorities for a garage or medium-sized workshop.
Buying Guide: How To Choose An Electric Salamander Heater
Selecting the right electric salamander heater requires matching heater capacity, electrical supply, installation type, and safety needs to your workspace. The following considerations will help you evaluate options from practical and compliance perspectives.
1. Heat Output And Coverage
- kW or BTU Rating: Higher kW/BTU numbers correspond to greater heat output. Use space volume and insulation level to estimate required output.
- Air Movement: Fan-forced units distribute heat faster; mounted units can direct warmth to targeted zones.
2. Power Supply And Electrical Requirements
- Voltage And Phase: Confirm whether your facility provides single-phase (common for 240V) or three-phase power (often needed for high-output units).
- Circuit Breaker Size: Check breaker and panel capacity—models in this guide list requirements from 30A to 75A. Professional electrical evaluation is recommended.
- Hard-Wired Vs Corded: Decide between direct-wire installation and units with long SO cords for temporary placement.
3. Installation Type And Location
- Portable Floor Units: Offer flexible placement and transport wheels; good for changing work areas.
- Wall/Ceiling Mount: Save floor space and provide directed heat; require secure mounting points and clearances.
- Clearances And Ventilation: Maintain manufacturer-recommended clearances; electric salamanders do not produce combustion byproducts but still require sufficient airflow for effective heating.
4. Safety Features And Construction
- Protective Guards: Guards over intake and output reduce object contact risk in busy sites.
- Sturdy Frames: Steel housings and stable bases support durability on construction sites.
- Electrical Protections: Ensure proper grounding, correct breaker sizing, and compliance with local codes.
5. Control And Usability
- Thermostat And Remote: Thermostats and remote controls improve usability and energy management in workspace heating.
- Mobility: Wheels and handles ease repositioning for portable models; cord length affects placement flexibility.
- Noise: Fan-forced heaters produce operational noise; consider noise sensitivity for indoor or occupied space use.
6. Maintenance And Serviceability
- Access To Components: Choose units with accessible fan and electrical components for routine inspections and service.
- Durability: Industrial-grade frames and components typically yield longer service life under demanding use.
7. Comparison Perspectives
- High-Output Industrial Use: Choose 15–30 kW or three-phase units for large warehouses or construction drying operations.
- Medium Workshop Use: 5–10 kW units balance performance and lower electrical demand for garages and smaller shops.
- Permanent Vs Temporary: Wall/ceiling-mounted models suit permanent installations, while portable models support temporary or rotating tasks.
Before purchasing, verify electrical supply compatibility, mounting clearances, and required circuit protection. When in doubt, consult a licensed electrician or HVAC professional to confirm that the selected unit meets operational needs and electrical code requirements.
Tips for Getting the Best HVAC Prices
- Prioritize Quality Over Cost
The most critical factor in any HVAC project is the quality of the installation. Don’t compromise on contractor expertise just to save money. - Check for Rebates
Always research current rebates and incentives — they can significantly reduce your overall cost. - Compare Multiple Quotes
Request at least three estimates before making your choice. You can click here to get three free quotes from local professionals. These quotes include available rebates and tax credits and automatically exclude unqualified contractors. - Negotiate Smartly
Once you've chosen a contractor, use the proven strategies from our guide — How Homeowners Can Negotiate with HVAC Dealers — to get the best possible final price.