Choosing a gas heater with a fan or blower can improve heat circulation and warm rooms faster. Below is a quick comparison of five gas heaters that offer built-in blowers, fan kits, or strong convective airflow suitable for rooms, garages, sunrooms, and workshops.
| Product | Type | Max BTU | Coverage |
|---|---|---|---|
| Mr. Heater 20K-30K With Blower Kit | Vent Free Fan Kit + Heater | 20,000–30,000 | Varies by model |
| Mr. Heater 30,000 BTU Vent Free | Blue Flame Wall Heater | 30,000 | Up To 1,000 Sq. Ft. |
| Mr. Heater 20,000 BTU Vent Free Propane | Blue Flame Wall Heater (Propane) | 20,000 | Up To 700 Sq. Ft. |
| Mr. Heater Big Maxx MHU80NG | Natural Gas Unit Heater (Forced Air) | 80,000 | Up To 2,000 Sq. Ft. |
| ProCom MN300TBA-B Ventless Natural Gas | Blue Flame With Thermostat | 30,000 | Up To 1,400 Sq. Ft. |
Content Navigation
Mr. Heater 20K – 30K Heater With Blower
Overview: This listing bundles a vent-free blue flame natural gas heater with a blower fan kit designed to improve air circulation from 20,000 or 30,000 BTU units made in 2016 and later.
Key Features: Compatibility with select Mr. Heater 20k and 30k models, three-position rocker switch for fan control, and a kit intended to boost convective distribution of warm air. The product requires a compatible heater produced in the specified model years.
Performance Notes: Adding a blower to a vent-free blue flame heater helps move warm air into occupied zones faster than convection alone. This kit is an accessory rather than a separate heater, so compatibility and proper installation are essential.
Mr. Heater 30,000 BTU Vent Free
Call 888-896-7031 for Free Local HVAC Quotes – Compare and Save Today!
Overview: A 30,000 BTU vent-free blue flame wall heater offering convection heat with a built-in thermostat and electric ignition. Designed for natural gas and rated for up to 1,000 sq. ft.
Key Features: Precise thermostat control, battery-powered electric ignition (battery included), blue flame burner for efficient convective heat, and effectiveness at elevations up to 4,500 feet. Fuel-efficient consumption rate is specified in the product details.
Performance Notes: Blue flame vent-free heaters rely on convective flow; a separate fan or installed blower kit (where compatible) can enhance distribution. The unit includes ODS (Oxygen Depletion Sensor) safety measures common to vent-free appliances.
Mr. Heater 20,000 BTU Vent Free Propane
Overview: A vent-free blue flame propane wall heater delivering up to 20,000 BTU, intended for rooms, additions, cabins, garages, and sunrooms up to 700 sq. ft.
Key Features: Battery-powered electronic ignition with the battery included, adjustable thermostat for control, and a factory-standard Oxygen Depletion Sensor (ODS) for safety. Rated for reliable operation at elevations up to 4,500 ft.
Call 888-896-7031 for Free Local HVAC Quotes – Compare and Save Today!
Performance Notes: As a propane unit, it is optimized for LP fuel and includes controls to regulate fuel consumption. Propane models typically provide similar comfort to natural gas units but require appropriate fuel supply and ventilation considerations for indoor use.
Mr. Heater Big Maxx MHU80NG Unit
Overview: A high-output natural gas forced-air unit heater rated at 80,000 BTU for larger garages, workshops, or commercial spaces up to about 2,000 sq. ft. Includes angle brackets and an LP conversion kit.
Key Features: 80,000 BTU performance, forced-air blower for rapid heat distribution, 120 V motor requiring electrical hookup, and venting options that include vertical or horizontal configurations depending on installation category.
Performance Notes: Unit heaters like this produce strong airflow and are intended for larger spaces where fast, even heating is required. Installation requires electrical supply, appropriate clearances, and compliance with venting category requirements.
ProCom MN300TBA-B Ventless Natural Gas
Overview: A compact ventless blue flame natural gas heater offering 30,000 BTU and thermostat control, designed for residential spaces with included wall mount and base feet.
Key Features: Thermostat control with High/Medium/Low settings, slim modern profile for versatile placement, mounts on wall or sits on included base feet, and rated to heat areas up to 1,400 sq. ft.
Performance Notes: Ventless blue flame heaters rely on room air for combustion and convective circulation for heat distribution. Thermostat control provides set-and-forget convenience; adding a fan can improve comfort in larger rooms or spaces with uneven heat zones.
Buying Guide: Choosing A Gas Heater With Fan Or Blower
Heat Output (BTU) And Room Size: Match the unit’s BTU rating to the square footage of the space. Small rooms often need 5k–20k BTU; larger garages or workshops may require 30k–80k BTU or more. Manufacturer coverage guides offer rough estimates but consider ceiling height and insulation.
Fan vs. Natural Convection: Units With A Built-In Blower Or Blower Kit accelerate heat distribution and can reduce warm-up time. Forced-air unit heaters (with electrical fans) are effective for large, open spaces. Vent-free blue flame heaters rely on convection, so adding a fan kit or external circulation fan can improve comfort.
Fuel Type And Availability: Confirm whether the heater is natural gas or propane and ensure supply availability. Some units are dedicated to one fuel and not convertible; check manufacturer notes. Conversion kits may be included for some models but follow instructions carefully.
Ventless vs. Venting Required: Vent-free heaters deliver combustion products directly into the room within regulatory limits and often include ODS safety features. Vented or unit heaters may require flue/venting and are preferred for certain installations or where indoor air quality is a concern.
Safety Features: Look for Oxygen Depletion Sensors (ODS), automatic shutoff for tip/over or low oxygen, and compliance with local building codes. Electrical ignition and battery-powered ignitions provide convenience but check power requirements for forced-air models.
Installation Requirements: Consider clearance requirements, mounting options (wall, floor, or ceiling), electrical needs for blowers, and whether professional installation or gas-line work is necessary. Unit heaters often require more substantial mounting and venting considerations.
Noise Level: Fans and blowers introduce noise. Check product details or user feedback for fan noise if quiet operation is important for living rooms, bedrooms, or offices.
Energy Efficiency And Controls: Thermostat controls, adjustable heat settings, and blower speed options can improve efficiency by matching output to demand. Blue flame burners are often fuel-efficient for indoor space heating.
Altitude And Performance: Some models specify performance at higher elevations. If you live at altitude, confirm the heater’s rated operation to maintain reliable ignition and heat output.
Compatibility And Accessories: If purchasing a fan kit or blower as an accessory, verify model compatibility and whether the kit is designed for your heater’s year and version. Improper kits may not fit or work safely.
Air Quality Considerations: Proper ventilation, carbon monoxide detectors, and adherence to local regulations are essential when using indoor gas heaters. Vent-free units are subject to usage guidelines; ensure fresh air exchange when operating for extended periods.
Maintenance And Serviceability: Regular inspection, cleaning of burner components, and periodic gas-line checks help sustain performance. Access to service parts and clear manufacturer instructions simplify long-term maintenance.
Tips for Getting the Best HVAC Prices
- Prioritize Quality Over Cost
The most critical factor in any HVAC project is the quality of the installation. Don’t compromise on contractor expertise just to save money. - Check for Rebates
Always research current rebates and incentives — they can significantly reduce your overall cost. - Compare Multiple Quotes
Request at least three estimates before making your choice. You can click here to get three free quotes from local professionals. These quotes include available rebates and tax credits and automatically exclude unqualified contractors. - Negotiate Smartly
Once you've chosen a contractor, use the proven strategies from our guide — How Homeowners Can Negotiate with HVAC Dealers — to get the best possible final price.