Choosing the right heater for a warehouse requires balancing heat output, installation type, fuel source, and safety features. The table below summarizes five heaters selected for warehouse and large-workshop use, including ceiling-mounted electric, hydronic hanging, high-capacity propane, and versatile space heater options for smaller zones.
| Product | Type | Primary Strength |
|---|---|---|
| Comfort Zone Hard-Wired Ceiling Mount Garage Electric Space Heater (CZ220BK) | Electric Ceiling-Mount | Space-saving ceiling installation, directed fan-forced heat |
| ALORAIR 100,000 BTU Hydronic Hanging Heater (HydroX H100A) | Hydronic Hanging | High BTU hydronic heat exchanger with quiet, continuous airflow |
| ProTemp 125,000 BTU LP Propane Heater (PT-125V-GFA-A) | Propane Unit Heater | Very high airflow and BTU output for large volumes |
| Dreo Space Heater, 25″ Fast Electric Heater | Portable Electric Fan Heater | Extended throw for large rooms, safety sensors |
| Dreo 1500W PTC Ceramic Space Heater (Portable) | Portable Electric | Fast ceramic heat for localized zones and offices |
Content Navigation
- Comfort Zone Hard-Wired Ceiling Mount Garage Electric Space Heater, 5,000W
- ALORAIR 100,000 BTU Hydronic Hanging Heater HydroX H100A
- ProTemp 125,000 BTU LP Propane Heater For Large Spaces
- Dreo Space Heater, 25″ Fast Electric Heater With Remote
- Dreo Space Heater, 1500W PTC Ceramic Fast Heat With Thermostat
- Buying Guide: How To Choose A Warehouse Heater
Comfort Zone Hard-Wired Ceiling Mount Garage Electric Space Heater, 5,000W
This ceiling-mount, fan-forced electric heater is built for garages, workshops, and small warehouses where floor space matters. The unit mounts overhead and hard-wires to a 240V supply, delivering concentrated heat without occupying work area square footage.
Key features include heavy-gauge steel construction for durability, louvers with an adjustable mounting angle for targeted heat distribution, and integrated overheat protection with a thermal cut-out switch. This design is well-suited for locations with limited floor access that benefit from directional, direct heating.
Consider this unit when you need a tidy installation that keeps equipment and aisles clear. It’s useful for spot or zone heating where ceiling mounting helps distribute warm air down into work areas.
ALORAIR 100,000 BTU Hydronic Hanging Heater HydroX H100A
Call 888-896-7031 for Free Local HVAC Quotes – Compare and Save Today!
The ALORAIR HydroX H100A is a hydronic water-to-air hanging heater providing continuous, high-BTU output suitable for medium to large warehouses. It uses hot water from a boiler or outdoor furnace and transfers heat through a heat exchanger to conditioned airflow.
Notable features are industrial-grade galvanized steel housing, corrosion-resistant copper piping, a reusable air filter, and a control panel with remote operation. The unit offers smart auto-temperature control—the fan cycles based on water temperature—maximizing energy efficiency.
This heater delivers a quieter performance (around 60 dBA at rated airflow) with a centrifugal blower producing substantial airflow for even heat distribution. It’s a strong option where a hydronic system exists or where integration with a boiler is planned.
ProTemp 125,000 BTU LP Propane Heater For Large Spaces
The ProTemp PT-125V-GFA-A is a high-capacity LP propane unit heater designed for large-volume spaces up to several thousand square feet. With a rated output in the six-figure BTU range, it’s intended for raw or lightly insulated warehouses and barns.
Its features include matched direct-drive motor and blade assemblies for high airflow (up to 12,000 CFM in specified configurations), powder-coated steel guards for corrosion resistance, and an energy-focused design that reduces electrical draw.
Call 888-896-7031 for Free Local HVAC Quotes – Compare and Save Today!
Choose this style of heater if a fuel-based solution is preferred for rapid warm-up and very high heat demand. Propane systems require proper ventilation, fuel supply management, and adherence to local codes for indoor combustion appliances.
Dreo Space Heater, 25″ Fast Electric Heater With Remote
This 25″ Dreo electric heater uses an upgraded thermal design and an extended impeller for extended heat throw, making it more effective in larger rooms and open areas than typical compact space heaters. It’s portable and intended for indoor use.
Safety features include tip-over and overheat protection, child lock setting, and flame-retardant materials. The unit emphasizes quiet operation (as low as 32 dB) and includes a thermostat and remote control for convenient zone management.
In warehouse contexts, this heater is most practical for localized warming of workstations or office islands inside a larger space. It’s not a replacement for whole-building heating but is useful for supplementing central heat or rapidly warming occupied zones.
Dreo Space Heater, 1500W PTC Ceramic Fast Heat With Thermostat
This compact 1500W PTC electric heater is built for quick, efficient heating in confined areas such as office corners, break rooms, or small workshops inside a warehouse. The PTC element heats rapidly and is paired with a designed funnel to extend throw compared to older designs.
Safety and control are prominent: the heater includes tilt-detection, overheat protection, adjustable thermostat with 1°F increments, and ETL certification. It also offers a timer and several operating modes to improve energy management.
Use this option where targeted, temporary heating is required for personnel comfort without modifying central systems. It’s a good choice for spot heating while the main building is kept at a lower background temperature.
Buying Guide: How To Choose A Warehouse Heater
Selecting the best heater for a warehouse depends on space volume, insulation, occupancy patterns, fuel availability, installation capacity, and local code. Use the following considerations to compare options objectively.
Heat Output And Coverage
Match heater output (BTU or watts) to the volume of the area, not just floor square footage. High ceilings increase required output because warm air stratifies. For rough sizing, estimate cubic feet and consult manufacturer airflow and BTU/watt ratings.
Fuel Type And Energy Source
- Electric: Clean, simple installation for zone heating and safer indoors; may be limited by electrical service capacity for very high outputs.
- Propane/LP: High BTU with fast warm-up for large uninsulated spaces; requires ventilation and fuel management.
- Hydronic: Uses boiler or outdoor furnace—efficient for continuous heating and integration into existing systems, lower operating noise.
Installation And Space Constraints
Ceiling or hanging units free floor space and distribute heat from above. Portable electric heaters work for spot heating. Consider mounting points, electrical panel capacity, venting needs, and fuel lines before buying.
Airflow And Distribution
Look at CFM (cubic feet per minute) or fan-forced designs that advertise extended throw. Louvers or directional mounts help focus heat onto work areas. For large, open warehouses, high CFM combined with multiple units often yields more even heating than one oversized unit.
Safety And Certifications
For indoor use, prefer units with overheat protection, tip-over switches, certified components (ETL/UL), and flame-retardant materials. Propane or combustion heaters must meet local code for inside use and have adequate ventilation and carbon monoxide monitoring.
Durability And Maintenance
Industrial settings need robust housings—galvanized or powder-coated steel—and accessible filters or serviceable components. Hydronic exchangers often include reusable filters; electric units should offer readily replaceable parts and clear wiring documentation.
Control Options And Zoning
Thermostat control, timers, and remote operation allow targeted heating schedules to reduce energy use. Consider thermostat placement and whether you need multiple zones or single-point spot heaters for workstations.
Noise And Worker Comfort
Blower noise can affect comfort and communication. Hydronic units and some electric units list dBA ratings; choose quieter designs near offices or dense workstations and higher CFM units for open floor areas where noise is less critical.
Cost Of Operation And Efficiency
Compare energy use (watts or BTU/hr) with fuel costs and expected duty cycles. Hydronic and high-efficiency combustion units can be more cost-effective for continuous heating, while electric portable units can be efficient for intermittent spot heating.
Code Compliance And Ventilation
Ensure compliance with local building, mechanical, and fire codes. Combustion heaters require proper exhaust and fresh air makeup; consult a licensed installer for permanent installations and fuel connections.
Decision Framework
- Determine the heated volume and required runtime (continuous vs. spot).
- Identify available utilities (electric capacity, fuel access, boiler systems).
- Select a mounting style that preserves workspace: ceiling/hanging vs. floor/portable.
- Prioritize safety certifications and maintenance accessibility.
- Compare operational costs for expected usage patterns.
Using these comparison perspectives—capacity, fuel, installation complexity, safety, and operating cost—will help narrow choices between ceiling electric units, hydronic exchangers, high-capacity propane heaters, and portable electric heaters for localized comfort.
Tips for Getting the Best HVAC Prices
- Prioritize Quality Over Cost
The most critical factor in any HVAC project is the quality of the installation. Don’t compromise on contractor expertise just to save money. - Check for Rebates
Always research current rebates and incentives — they can significantly reduce your overall cost. - Compare Multiple Quotes
Request at least three estimates before making your choice. You can click here to get three free quotes from local professionals. These quotes include available rebates and tax credits and automatically exclude unqualified contractors. - Negotiate Smartly
Once you've chosen a contractor, use the proven strategies from our guide — How Homeowners Can Negotiate with HVAC Dealers — to get the best possible final price.