Best Indoor Forced Air Heaters for Garages and Workshops

Quick Overview: This guide compares reliable indoor forced air heaters designed for garages, workshops, and large indoor spaces. The table below summarizes the five selected forced-air units to help you scan features quickly.

Product	Fuel / Power	Heating Capacity	Key Feature
Dura Heat EUH1465 Electric Forced Air Heater	Electric (1500W)	Small spaces	Pivoting base, PTC ceramic
Mr. Heater MH60QFAV 60,000 BTU Propane Forced Air Heater	Propane	Large open spaces	QBT quieter operation, variable output
Dura Heat EWH5510 Electric Forced Air Garage Heater	Hard-wired Electric (5,000W/240V)	Up to ~750 sq. ft.	Remote control, adjustable thermostat
Mr. Heater MH35FA 35,000 BTU Propane Forced-Air Heater	Propane	Up to ~800 sq. ft.	Portable, high BTU for medium spaces
Dyna-Glo KFA50DGD 50,000 BTU Kerosene Forced Air Heater	Kerosene	Up to ~1,200 sq. ft.	High-capacity fuel heater

Dura Heat EUH1465 Electric Forced Air Heater With Pivoting Base

Check Price on Amazon

Brand: Dura Heat

This unit delivers 1500W of PTC ceramic heating, providing quick warmth for small to medium indoor work areas. The heater is built with rugged steel construction intended for garages, workshops, and light commercial spaces. A key benefit is the pivoting base, which allows directional forced-air circulation for targeted comfort.

• Heating Modes: Heat and fan-only settings for versatile use as an electric heater or air circulator.
• Portability: Compact and manageable for spot heating where needed.
• Durability: Steel body designed for tougher environments than typical indoor space heaters.

Applicable for homeowners and light-duty commercial users who need an electric forced-air unit without fuel handling. Performance is best in enclosed or semi-enclosed spaces where 1500W is sufficient to maintain comfort.

Mr. Heater MH60QFAV 60,000 BTU Portable Propane Forced Air Heater

Check Price on Amazon

Brand: Mr. Heater

This propane forced-air heater offers variable output from 30,000 to 60,000 BTU, suitable for large indoor spaces like commercial garages and job sites. It uses QBT technology to operate up to 50% quieter than standard propane blowers, improving usability in occupied work areas.

• Runtime: Runs up to approximately 14 hours on a 20 lb. tank at lower settings—useful for extended operations.
• Portability: Designed to be portable for site-to-site use while delivering significant forced-air heating power.
• Application: Best for workshops, construction sites, or large garages where fuel-fired forced-air heat is permitted and ventilation is addressed.

Because it’s a propane unit, users must follow ventilation and safety guidelines. This heater is intended where combustion heat is acceptable and proper clearances are maintained.

Dura Heat EWH5510 Electric Forced Air Heater With Remote Control

Check Price on Amazon

Brand: Dura Heat

This larger electric forced-air garage heater is a hard-wired 240V, 5,000W (approx. 17,060 BTU) unit intended to cover up to 750 sq. ft. It requires professional installation and dedicated circuit capacity. The unit includes a remote control and LED thermostat for temperature setting and ease of operation.

• Control: Remote and adjustable thermostat with display settable from 45–99°F for precise control.
• Installation: Hard-wired design requires licensed electrician and suitable 30A circuit.
• Coverage: Designed to evenly distribute forced air in a garage or larger shop compared to small plug-in heaters.

Suitable for users who want an electric forced-air solution without combustion. Installation considerations and electrical capacity are primary determinants for suitability.

Mr. Heater 35,000 BTU Propane Forced-Air Heater MH35FA

Check Price on Amazon

Brand: Mr. Heater

The MH35FA provides 35,000 BTU of forced-air heat targeted at smaller industrial and commercial workspaces and larger garages. It is designed to heat up to about 800 square feet and offers long runtime on appropriate fuel tanks.

• Portability: Built for transport between job sites; ideal for contractors and shop owners needing mobile heat.
• Durability: Constructed for rugged use in work environments.
• Fuel: Propane operation requires attention to safe placement, ventilation, and local codes.

This model suits scenarios where electrical supply is limited and a fuel-fired forced-air heater is preferred for its high output and mobility.

Dyna-Glo KFA50DGD 50,000 BTU Kerosene Forced Air Heater

Check Price on Amazon

Brand: Dyna-Glo

The Dyna-Glo KFA50DGD is a high-capacity kerosene forced-air heater rated at 50,000 BTU and intended to heat up to 1,200 sq. ft. It features a carrying handle for mobility and is designed for large, unheated indoor spaces where fuel-fired heat is acceptable.

• Fuel Type: Kerosene requires safe storage, handling, and attention to indoor combustion byproducts and ventilation.
• Use Case: Best for large shops, warehouses, and agricultural buildings where electric supply is insufficient for required output.
• Maintenance: Regular cleaning and fuel system checks are important for reliable combustion performance.

Users should confirm compliance with building codes and ensure adequate ventilation and carbon monoxide monitoring when operating kerosene heaters indoors.

Buying Guide: How To Choose An Indoor Forced Air Heater

Define The Space And Heat Load — Measure the square footage and consider insulation levels. Forced-air heater capacity is commonly expressed in BTU (fuel units) or watts (electric). Higher BTU/watt ratings are needed for larger, less insulated spaces.

Fuel Type And Availability — Electric units are simpler to use indoors and do not emit combustion byproducts but need adequate circuit capacity. Propane and kerosene heaters provide higher BTU output and mobility but require ventilation, safe fuel storage, and adherence to local codes.

Permanent Vs. Portable — Hard-wired electric forced-air heaters provide consistent, built-in heat suitable for garages and workshops but need professional installation. Portable forced-air units offer flexibility and site-to-site use but may require fuel tanks or access to power.

Safety Features — Look for overheat protection, tip-over switches (on portable units), thermal cutoffs, and robust housing. For combustion units, ensure proper clearance, flame arrestors where applicable, and consider installing carbon monoxide monitors in the space.

Noise And Comfort — Forced-air units use blowers; some models incorporate noise-reducing technologies (e.g., QBT). Consider decibel expectations if the workspace is also used for meetings or close-proximity tasks.

Controls And Thermostat — Adjustable thermostats and remote controls allow better temperature management and efficiency. Look for precise temperature settings if maintaining a constant environment is important.

Runtime And Fuel Consumption — For fuel-fired units, check approximate runtime on common tank sizes. This affects downtime for refueling and operational cost.

Installation And Electrical Requirements — Confirm the required circuit size for electric forced-air heaters and whether professional wiring is necessary. Hard-wired models typically require a dedicated 240V circuit and licensed electrician installation.

Maintenance And Serviceability — Forced-air heaters need periodic cleaning of intake screens, blowers, and, for combustion units, fuel lines and burners. Assess ease of service and availability of replacement parts.

Application And Code Compliance — Match the heater to the intended application: indoor shop, temporary job site, or permanent garage install. Verify local building codes and fire safety regulations for indoor fuel-fired heater use.

Comparative Perspectives:

• Electric Forced-Air Heaters: Safer for enclosed indoor use with no combustion byproducts, ideal where adequate electrical capacity exists.
• Propane Forced-Air Heaters: Offer high mobility and powerful output; require ventilation and careful fuel handling.
• Kerosene Forced-Air Heaters: Provide very high output for large spaces but demand strict fuel storage and ventilation practices.
• Hard-Wired Garage Heaters: Deliver distributed electric forced-air heat with built-in controls but require upfront installation costs.

Use the above considerations to align heater selection with your space size, fuel access, safety requirements, and installation preferences. Prioritize units with documented safety features and clear installation guidance for indoor forced-air heating applications.