Protecting a kerosene heater extends its life and keeps it ready for use. Below is a quick comparison table of top covers chosen for forced-air kerosene heaters and round standing patio heaters that are commonly used as kerosene or propane units. Confirm your heater dimensions before purchasing.
| Cover | Best For | Material / Key Feature |
|---|---|---|
| Exokugo Kerosene Forced Heater Cover | 50,000–80,000 BTU Forced-Air Heaters | 600D Oxford, waterproof, side handles |
| Hualedi Patio Heater Cover | Round Stand-Up Patio Heaters | Tear-resistant fabric, 89″H fit |
| QH.HOME Upgraded Patio Heater Cover | Windy Locations / Heavy Use | 500D tear-resistant, YKK zipper, windproof design |
| EAST OAK Patio Heater Cover | Standard Round Patio Heaters | 300D Oxford with PU coating |
| PureFit Waterproof Patio Heater Cover | UV & Weather Protection | 420D Oxford, PU coating, long zipper |
Content Navigation
Exokugo Kerosene Forced Heater Cover
This cover Is Specifically Sized For 50,000 BTU And 80,000 BTU kerosene/diesel forced-air heaters and fits other forced-air units with similar dimensions (13″D x 34″W x 17″H). The construction uses 600D Oxford cloth with waterproof coating to resist water, dirt, dust, smoke and odors. Two side handles are included to simplify installation and removal.
Key benefits include protective barrier against corrosion and contaminants and an easy-to-grab design for frequent storage. Verify the forced-air heater’s external dimensions to ensure a correct fit. The material is described as tear-resistant and suitable for outdoor storage where moisture protection is needed.
Hualedi Patio Heater Cover 89″ Height
Designed For Standard Round Stand-Up Patio Heaters, the Hualedi cover lists dimensions of 89″H x 33″ Dome x 19″ Base. The fabric is described as tear-resistant with long-term outdoor use in mind. The cover aims to protect against wind, dust, snow and sunlight.
Call 888-896-7031 for Free Local HVAC Quotes – Compare and Save Today!
For users who need an all-weather patio heater protector, this cover emphasizes durable fabric and broad compatibility. Buyers should confirm height and dome/base diameters match their heater. The design is focused on general weather protection rather than forced-air heater-specific fit points.
QH.HOME Upgraded Patio Heater Cover
The QH.HOME cover Highlights An Upgraded 500D Tear-Resistant Oxford Fabric and an exclusive windproof design using three retractable Velcro strips to reduce sail effect in gusts. A branded YKK zipper is included for smoother operation and long-lasting closure performance.
This model is positioned for locations that experience strong winds or frequent cover handling. The windproof fastening system and heavy-duty fabric are intended to keep covers secured and limit abrasion. Check the listed dimensions (89″H x 33″D x 19″W) against your heater before purchase.
EAST OAK Patio Heater Cover 300D Oxford
EAST OAK’s cover Uses 300D Oxford Fabric With PU Coating and is sized to fit round patio heaters at 89″ Height x 33″ Dome x 19″ Base. The product notes compatibility with several EAST OAK models while advising buyers to confirm their heater size prior to purchase.
Call 888-896-7031 for Free Local HVAC Quotes – Compare and Save Today!
The material combination aims to resist cracking in cold weather and handle rain or snow exposure. This cover suits consumers seeking a balance of durability and value within common domestic heater sizes. It is described primarily as a weather shield rather than a specialized forced-air heater enclosure.
PureFit Waterproof Patio Heater Cover
PureFit Lists A 420D Oxford Fabric With PU Coating And UV-Resistant Technology. The universal dimensions are indicated as 89” x 33” x 19”, and features include a long zipper and adjustable drawcord with toggle to improve fit and retention in windy conditions.
This cover is aimed at buyers wanting stronger fabric and UV protection for heaters exposed to sun and seasonal weather. The long zipper allows easier access and removal. Ensure height and dome/base diameters align with your heater before ordering.
Buying Guide: Choosing The Right Kerosene Heater Cover
Selecting the correct cover requires matching your heater’s type, dimensions and exposure conditions. Below are the key factors to evaluate when comparing covers.
Fit And Dimensions
- Measure Your Heater: For forced-air kerosene heaters, measure width, depth and height of the exterior housing. For round stand heaters, measure total height and dome/base diameters.
- Allow For Accessories: If your heater has handles, wheels or an attached fuel tank, include those in measurements.
Material Durability
- Denier Rating (e.g., 300D, 420D, 500D, 600D) indicates fabric thickness and tear resistance. Higher denier typically offers greater durability.
- PU Coating Or Waterproofing protects against moisture; ensure seams and zipper areas are well-covered.
Weather Resistance
- UV Protection prevents sun-related degradation when heaters are stored outdoors.
- Windproof Features such as drawcords, Velcro straps, or multiple fastening points reduce sail effects and improve stability.
- Snow And Cold Performance: Look for materials rated for low temperatures that won’t crack when freezing.
Closure And Access
- Zippers: Heavy-duty zippers (YKK or reinforced designs) last longer and facilitate easier fit/removal.
- Long Zipper Or Multiple Fastenings allow easier access for periodic maintenance without fully removing the cover.
Handling And Storage Features
- Handles Or Side Grips make installation quicker and reduce wear during repeated use.
- Storage Bags help keep covers compact and protected when not in use.
Compatibility With Kerosene Heaters
- Forced-Air Kerosene Heaters: Look for covers specifically sized for forced-air models (Exokugo example). Round patio heater covers may not fit forced-air bodies correctly.
- Stand-Up / Propane Heaters: Many round covers fit propane patio heaters and some kerosene stand models if dimensions match.
Security And Safety Considerations
- Cool, Dry Storage is recommended for kerosene heaters; ensure the cover does not trap moisture against the heater when stored in an unventilated area.
- Remove Fuel Sources Before Long-Term Storage following manufacturer guidance; covers are for protection during storage, not operation.
Comparative Perspectives
- Heavy-Duty vs. Lightweight: Higher-denier fabrics (500D–600D) provide more abrasion resistance and tear strength for exposed locations. Lower denier (300D) can be sufficient in sheltered areas.
- Windproof Systems: Covers with Velcro straps, drawcords, or adjustable buckles are preferable in windy zones to reduce flapping and potential damage.
- Zipper Quality: A branded or reinforced zipper reduces the risk of failure under tension or repeated use.
When evaluating options, prioritize a cover that matches the physical profile of your kerosene heater, uses durable waterproof materials, and includes attachment features appropriate for local weather. Measure carefully and compare fabric denier and fastening designs to find the best protective solution for your equipment.
Tips for Getting the Best HVAC Prices
- Prioritize Quality Over Cost
The most critical factor in any HVAC project is the quality of the installation. Don’t compromise on contractor expertise just to save money. - Check for Rebates
Always research current rebates and incentives — they can significantly reduce your overall cost. - Compare Multiple Quotes
Request at least three estimates before making your choice. You can click here to get three free quotes from local professionals. These quotes include available rebates and tax credits and automatically exclude unqualified contractors. - Negotiate Smartly
Once you've chosen a contractor, use the proven strategies from our guide — How Homeowners Can Negotiate with HVAC Dealers — to get the best possible final price.