Finding the right spark plug for kerosene heaters improves ignition reliability and heater uptime. The table below summarizes five widely compatible replacement plugs for popular forced-air kerosene and diesel heaters sold under brands like Dyna-Glo, Dura-Heat, ProTemp, and Remington.
| Product | Brand | Key Fit |
|---|---|---|
| Generec Replacement SP-KFA1009 | generec | Wide multi-fuel portable forced-air heater compatibility |
| SP-KFA1021 210K Spark Plug | ZYKORNIUM | Designed for 210K BTU forced-air heaters |
| Champion Industrial FI21501 | Champion | Industrial-grade plug for aggressive environments |
| WELURE 2x SP-KFA1009 Replacement | WELURE | Two-pack SP-KFA1009 replacements with dimensional specs |
| 70-052-0200 Ignitor (ASKT) | ASKT | Used on 125k–400k BTU Pinnacle/ProTemp/HeatHog/Remington heaters |
Content Navigation
- Generec Replacement For SP-KFA1009 Heater Spark Plug
- SP-KFA1021 Spark Plug For 210K BTU Forced Air Heaters
- Champion Spark Plug Industrial FI21501
- WELURE 2x Replacement For SP-KFA1009 Heater Spark Plug
- 70-052-0200 Spark Plug ProTemp / Remington / Master / HeatStream
- Buying Guide: Choosing The Right Spark Plug For Kerosene Heaters
Generec Replacement For SP-KFA1009 Heater Spark Plug
This replacement SP-KFA1009 spark plug targets a broad list of portable forced-air heaters. The manufacturer lists compatibility with models across Dyna-Glo, Dyna-Pro, Dura-Heat, ProTemp, HeatHog, Remington, Master, HeatStream, Dayton, WorkHorse, and many private-label units commonly sold at major retailers.
The product description highlights that the SP-KFA1009 is the updated electrode version intended for multi-fuel heater ignition systems. It’s positioned for use in a wide array of model numbers (KFA and RMC series), which makes it useful when original part numbers are no longer available.
Key installation considerations: confirm your heater model number against the compatibility list and ensure electrode placement and porcelain length match the original plug. This replacement emphasizes broad fit rather than a single-model design.
SP-KFA1021 Spark Plug For 210K BTU Forced Air Heaters
Call 888-896-7031 for Free Local HVAC Quotes – Compare and Save Today!
The SP-KFA1021 is described as optimized for 210,000 BTU forced-air heaters. It lists compatibility with Dyna-Glo, Dura Heat, Thermoheat, and other leading heater brands that use high-BTU forced-air combustion systems.
Features emphasize heat-resistant materials and consistent ignition performance, designed to withstand frequent high-temperature cycles. For operators running larger capacity heaters, this plug focuses on reliable spark delivery to minimize failed ignitions and downtime.
When selecting this part, match the BTU rating and mounting/electrode geometry. Products designed for higher BTU units often use heavier-duty materials and slightly different electrode gaps to accommodate fuel-air dynamics at elevated output.
Champion Spark Plug Industrial FI21501
The Champion FI21501 is an industrial spark plug noted for application in high-compression and aggressive operating environments. Champion positions this item for equipment requiring robust ignition components and compatibility with alternative fuels.
The features reference support for CO2 reduction applications and broader fuel types. While not a brand-specific OEM replacement for KFA-style plugs, its industrial-grade construction can suit custom or professional heater repair scenarios where a manufacturer-specified part is unavailable.
Call 888-896-7031 for Free Local HVAC Quotes – Compare and Save Today!
Before substituting an industrial plug, verify thread size, porcelain length, and electrode gap to ensure proper clearance and safe mounting in forced-air heater assemblies. Industrial parts sometimes differ in geometry compared with OEM heater-specific plugs.
WELURE 2x Replacement For SP-KFA1009 Heater Spark Plug
This WELURE listing contains two SP-KFA1009-style spark plugs, and the product information includes detailed dimensions. The white porcelain length and electrode offsets are specified, plus the approximate electrode gap and center-to-tip measurement.
Compatibility notes mirror other KFA1009 replacements: Dura-Heat, ProTemp, HeatHog, Remington, Master, HeatStream, Dayton, WorkHorse, and Dyna-Glo models in the 120–400K BTU range. The dimensional data helps installers confirm fitment when cross-referencing original parts.
For maintenance teams or users wanting a spare, the two-pack format simplifies stocking. Verify the physical measurements against your heater’s OEM plug before installation to avoid misalignment or improper spark gap.
70-052-0200 Spark Plug ProTemp / Remington / Master / HeatStream
The 70-052-0200 ignitor is listed for use on 125k, 175k, 215k and 400k BTU oil-fired heaters produced by Pinnacle-family brands, including ProTemp, HeatHog/Remington, Master, HeatStream, and certain Dayton models.
This part is targeted at OEM replacement channels where the part number matches service manuals for those heater ranges. It’s useful when identifying the correct ignitor requires matching a manufacturer part number rather than a universal KFA designation.
Installers should confirm the part number stamped in the heater’s service documentation or on the existing ignitor, as the 70-052-0200 is particularly associated with Pinnacle-origin equipment and some Dayton model cross-references.
Buying Guide: Choosing The Right Spark Plug For Kerosene Heaters
Compatibility And Model Matching
Verify OEM Part Numbers: Start by checking your heater’s model plate or service manual for the OEM ignitor/part number. Cross-reference that number with replacement listings to ensure a direct match where possible.
Match Physical Dimensions: Critical dimensions include porcelain length, thread diameter/length, center-to-electrode distance, electrode bend/drop, and tip gap. Even plugs labeled compatible can fail if geometry differs and the gap or clearance contacts internal components.
BTU Rating And Duty Cycle
Choose By Heater Output: Some replacements are specified by BTU range (for example, 210K). Higher-BTU heaters may require plugs made from more heat-resistant alloys or with different electrode tolerances to maintain consistent spark under heavier load.
Operational Frequency: For commercial or construction sites with continuous operation, prioritize parts noted for high durability and robust materials. Industrial-grade plugs or those marketed as heavy-duty can extend service intervals.
Material And Construction
Porcelain Insulator Quality: Durable porcelain resists cracking under thermal cycling. Check product descriptions for heat-resistant materials when available.
Electrode Material: Look for corrosion-resistant electrodes and tips that handle sooting from kerosene/diesel combustion. Some aftermarket plugs specify enhanced alloys for longevity.
Ignition Performance And Reliability
Consistent Spark Delivery: Reliable ignition reduces failed starts and fuel flooding. Products indicating consistent ignition performance are preferable for heaters used in cold starts or intermittent operation.
Gap Specification: Confirm the recommended electrode gap for your heater and select a plug that either ships pre-gapped correctly or can be adjusted safely to the manufacturer’s spec.
OEM Vs. Aftermarket Replacements
OEM Matching: OEM parts guarantee form-fit compatibility when part numbers match. When possible, choose OEM-replacement listings labeled with cross-reference numbers.
Aftermarket Options: Aftermarket plugs often offer broader compatibility and cost advantages. Ensure dimensions and materials meet the heater’s needs and review specification sheets for geometry details.
Practical Considerations For Installation
Turn Off Power And Fuel: Always disconnect power and fuel sources before replacing the plug to prevent accidental ignition.
Inspect Wiring And Insulator: Check the ignition cable, terminal boot, and insulation for wear. Replacing a plug while the ignition lead is compromised can yield continued ignition issues.
Gap And Torque: Set electrode gap per heater manual and tighten to recommended torque when specified. Over-tightening can crack the insulator; under-tightening may allow arcing at the mounting point.
Comparative Perspectives
Compatibility-First Approach: If you require a direct replacement, prioritize listings that show an exact OEM cross-reference or an extensive model list matching your heater.
Durability-First Approach: For demanding use, select plugs described as heavy-duty or industrial, with materials rated for high-temperature cycles.
Value-First Approach: Multi-packs (two or more) provide immediate spares and can be cost-effective for maintenance teams. Ensure the pack’s geometry matches the OEM dimensions.
When To Consult A Technician
If ignition problems persist after installing a verified compatible plug, consult a qualified service technician. Persistent misfires can stem from fuel system issues, clogged nozzles, airflow problems, or ignition coil failures rather than the plug alone.
Tips for Getting the Best HVAC Prices
- Prioritize Quality Over Cost
The most critical factor in any HVAC project is the quality of the installation. Don’t compromise on contractor expertise just to save money. - Check for Rebates
Always research current rebates and incentives — they can significantly reduce your overall cost. - Compare Multiple Quotes
Request at least three estimates before making your choice. You can click here to get three free quotes from local professionals. These quotes include available rebates and tax credits and automatically exclude unqualified contractors. - Negotiate Smartly
Once you've chosen a contractor, use the proven strategies from our guide — How Homeowners Can Negotiate with HVAC Dealers — to get the best possible final price.