Quick Overview: This guide compares five top-rated space and wall heaters that include remote control operation for convenient temperature management. The table below summarizes each model’s key strengths to help you choose a heater that fits room size, mounting preference, and safety needs.
| Product | Key Features | Best For |
|---|---|---|
| VOCRS 1500W PTC Space Heater | 3 heat modes, thermostat, 12H timer, remote | Portable bedroom or office use |
| JIBUFI 1500W PTC Heater | 70° oscillation, ETL safety, ECO mode, remote | Even coverage for small rooms |
| Dreo Portable Electric Heater | Advanced PTC, precise thermostat, 12H timer | Precise temperature control and distance heating |
| GiveBest Electric Wall Heater | Wall or floor mount, Wi‑Fi, remote, ECO mode | Fixed installation, smart home integration |
| Dreo Smart Wall Heater WH719S | 120° vertical oscillation, app and voice control | Smart wall-mounted whole‑room distribution |
Content Navigation
VOCRS 1500W PTC Space Heater
The VOCRS ceramic heater provides three heating modes (700W/1000W/1500W) with an integrated thermostat and a 1–12 hour timer. The included remote allows users to change modes, adjust temperature, and set timers from a distance. The digital display communicates operating status and set temperature.
Key practical points: multiple power levels support energy-conscious use, the timer helps prevent unnecessary run time, and the remote increases convenience when the unit is placed near sleeping or working areas. This model targets small- to medium-sized indoor spaces such as bedrooms and offices.
JIBUFI 1500W Oscillating Heater
JIBUFI’s space heater delivers 1500W rapid heating combined with a 70° wide-angle oscillation to distribute warmth across a larger footprint. It includes an ECO mode for automatic temperature regulation and a remote control for adjusting settings without interrupting activities.
Call 888-896-7031 for Free Local HVAC Quotes – Compare and Save Today!
Safety certifications and features are emphasized: ETL certification, tip-over protection, flame-retardant materials, and an enhanced safety plug. The combination of oscillation and safety features positions this unit for users who want wider heat distribution and robust protection in living rooms, garages, or small basements.
Dreo Portable Electric Heater
Dreo’s portable model uses an advanced PTC system and a heat funnel design to increase warm-air reach. It offers a wide temperature range with fine 1°F increments for precise control, a 12H timer, and remote operation.
Safety features include a tilt-detection sensor, overheat protection, and V0 flame-retardant materials, all ETL certified. The product focuses on delivering fast, accurate heating and expanded coverage, making it suitable for users prioritizing precise thermostat control and safety certifications.
GiveBest Wall Or Floor Heater With WiFi
GiveBest offers a dual installation design for wall mounting or floor placement with retractable feet. The unit supports remote, touch, and Wi‑Fi control, enabling preheat scheduling via an app and remote adjustments. An ECO heating mode and a built-in thermostat aim to balance comfort and efficiency.
Call 888-896-7031 for Free Local HVAC Quotes – Compare and Save Today!
This heater is oriented toward homeowners seeking a semi-permanent solution that integrates with smart controls. The flexibility of floor or wall placement plus Wi‑Fi compatibility make it a candidate for living rooms, bedrooms, and multi-use spaces that benefit from remote preheating and scheduling.
Dreo Smart Wall Heater WH719S
The Dreo WH719S is a wall-mounted electric heater offering 120° vertical oscillation to distribute heat top-to-bottom across a room. It supports remote control, app-based scheduling, and voice control via Alexa or Google Home. Temperature control includes a fine resolution for accurate comfort settings.
Designed for fixed installations, this unit’s emphasis is on even distribution and smart-home compatibility. It suits users who prioritize centralized, app-controlled heating and want to integrate a wall-mounted system into a connected home environment.
Buying Guide: How To Choose A Remote Control Heater
Selecting the right remote control heater depends on several factors including room size, mounting preference, control features, and safety requirements. Below are key considerations and comparison perspectives to guide a purchase.
1. Heater Type And Placement
- Portable Space Heaters: Ideal for temporary heating in bedrooms, offices, or small living areas. They provide flexibility to move between rooms and typically include remote control, timers, and multiple power levels.
- Wall-Mounted Heaters: Offer a semi-permanent solution that saves floor space and can deliver more consistent distribution when sized correctly for the room. Many wall units include Wi‑Fi and app control for preheating and remote access.
2. Heating Performance And Coverage
- Check the wattage—commonly 1500W for portable models—suitable for rooms up to about 200 square feet depending on insulation and ceiling height.
- Look for features that enhance distribution such as oscillation or vertical range; these help move warm air throughout the room rather than creating a localized hot spot.
3. Control Options And Smart Features
- Remote Control: Standard on most models; useful when the heater is out of reach or mounted.
- Timers And Thermostats: Timers (1–12+ hours) and thermostats help maintain a target temperature and reduce energy use.
- Wi‑Fi/App And Voice Control: Found on wall units and higher-end models; enables scheduling, remote preheating, and integration with smart home systems.
4. Safety Features
- Look for ETL/UL certification or equivalent; this indicates third-party safety testing.
- Essential protections include tip-over shutoff, overheat protection, flame-retardant materials, and a safety plug.
- Wall-mounted units reduce tip-over risk but still should include overheat sensors and secure mounting hardware.
5. Energy Efficiency And Modes
- ECO Mode: Automatically adjusts output to maintain target temperature and can reduce energy usage.
- Multiple power settings (e.g., 700W/1000W/1500W) let you adapt consumption to varying needs.
6. Usability And Display
- Digital displays and precise temperature control (1°F increments) aid in accurate comfort settings.
- Remote ergonomics matter for users with limited mobility; oversized buttons or clear icons improve usability.
7. Installation And Portability
- Consider whether you prefer plug-and-play portability or a wall-mounted solution that may require mounting tools.
- Retractable feet and handles increase portability for units that offer both floor and wall placement.
8. Maintenance And Durability
- Choose units with durable housings and accessible air intakes for periodic cleaning.
- Check manufacturer support for replacement remotes or replacement parts if compatibility is a concern.
9. Comparison Perspectives
- Best For Portability: Look for compact PTC ceramic heaters with multiple power levels and a lightweight design.
- Best For Whole‑Room Distribution: Choose a unit with wide-angle oscillation or vertical oscillation and a strong airflow design.
- Best For Smart Home Integration: Wall-mounted models with Wi‑Fi/app and voice control provide scheduling and remote preheat capabilities.
- Best For Safety‑Focused Buyers: Prioritize models with ETL/UL certifications, tip-over and overheat protection, and flame-retardant materials.
When evaluating options, match the heater’s control features, mount style, and safety certifications to your primary use case. Remote control is a convenience feature across all these models, but additional attributes—oscillation, Wi‑Fi, thermostat precision, and safety systems—determine which unit will best serve your room size and lifestyle.
Tips for Getting the Best HVAC Prices
- Prioritize Quality Over Cost
The most critical factor in any HVAC project is the quality of the installation. Don’t compromise on contractor expertise just to save money. - Check for Rebates
Always research current rebates and incentives — they can significantly reduce your overall cost. - Compare Multiple Quotes
Request at least three estimates before making your choice. You can click here to get three free quotes from local professionals. These quotes include available rebates and tax credits and automatically exclude unqualified contractors. - Negotiate Smartly
Once you've chosen a contractor, use the proven strategies from our guide — How Homeowners Can Negotiate with HVAC Dealers — to get the best possible final price.