Salamander space heaters provide high-output electric or forced-air heating for garages, workshops, and construction sites. Below is a concise comparison of five relevant models from the provided selection to help you match power, installation needs, mobility, and safety features to your space.
| Product | Type / Output | Ideal Use |
|---|---|---|
| DR. INFRARED HEATER DR-PS11024 | 10,000-Watt, 240V | Portable floor-mounted job site heating |
| Dura Heat Hard-Wired Ceiling Mount 10,000W | 10,000-Watt, 240V | Ceiling-mounted garage/workshop |
| Dura Heat EWH5510 Electric Forced Air | 5,000-Watt / 17,060 BTU, 240V | Large garage up to ~750 sq. ft. |
| Global Industrial Portable Electric Salamander | 30 kW, 480V, 3-Phase | Heavy industrial spaces and large job sites |
| BLACK+DECKER Portable Space Heater | Up to 1,500W, 120V | Personal workspace or small indoor areas |
Content Navigation
- DR. INFRARED HEATER DR-PS11024 Salamander Construction 10,000-Watt
- Dura Heat Hard-Wired Ceiling Mount Electric Garage Heater 10,000W
- Dura Heat EWH5510 Electric Forced Air Heater With Remote
- Global Industrial Portable Electric Salamander Heater, 30 kW, 3-Phase
- BLACK+DECKER Portable Space Heater With Carry Handle
- Buying Guide: How To Choose A Salamander Space Heater
- 1. Determine Required Heating Capacity
- 2. Power Supply And Electrical Requirements
- 3. Installation Style: Portable Versus Fixed
- 4. Airflow And Heat Distribution
- 5. Safety Features And Build
- 6. Controls And Thermostat Accuracy
- 7. Mobility And Footprint
- 8. Intended Use And Environment
- 9. Maintenance And Durability
- 10. Code Compliance And Professional Installation
- Comparison Perspectives To Consider
DR. INFRARED HEATER DR-PS11024 Salamander Construction 10,000-Watt
Type And Output: Portable electric salamander style heater rated at 10,000 watts, single phase 240V. Designed for high-output, instant fan-forced heat.
Key Features: Clean, instant, odor-free heat; floor-mount design; heavy-duty steel frame; safety guards on intake and output. Requires a 55-amp circuit breaker and appropriate wiring for operation.
Best For: Temporary job-site heating, workshops, and garages where a powerful portable unit is needed. The floor-mount form factor allows placement near work zones.
Installation And Safety Notes: Because it is high current, ensure appropriate 240V circuit and breaker sized at 55A. Safety guards and sturdy frame provide protection on active sites. No fixed ceiling mount required, but check local electrical codes for portable high-amperage devices.
Call 888-896-7031 for Free Local HVAC Quotes – Compare and Save Today!
Dura Heat Hard-Wired Ceiling Mount Electric Garage Heater 10,000W
Type And Output: Hard-wired 10,000-watt, 240V ceiling-mounted electric garage heater with ECO system and overheat protection.
Key Features: Large coverage (rated up to ~1,500 sq. ft.), LED display with thermostat control, remote control, 9-hour timer, and integrated safety functions. Requires professional installation and appropriate 50A circuit.
Best For: Permanent garage or workshop installations where ceiling-mounted distribution preserves floor space and provides even heating in medium-to-large bays.
Installation And Safety Notes: Requires hard-wiring to 240V, professional installation, and a circuit rated to match the unit. Ceiling mounting changes airflow patterns vs. floor units; confirm airflow reaches target zones and meets clearance requirements.
Dura Heat EWH5510 Electric Forced Air Heater With Remote
Call 888-896-7031 for Free Local HVAC Quotes – Compare and Save Today!
Type And Output: Electric forced-air garage heater rated at 5,000 watts / 17,060 BTU, designed to cover spaces up to ~750 sq. ft.
Key Features: Remote control, adjustable thermostat with LED display (45-99°F range), 240V hard-wired design, and a power indicator. Manufacturer specifies professional installation for safe operation.
Best For: Medium-sized garages or workshops that need a fixed heater with straightforward thermostat control and remote convenience.
Installation And Safety Notes: As a hard-wired 240V appliance, it requires proper breaker sizing and wiring. Forced-air output distributes heat quickly; check mounting clearances and ventilation for safe operation.
Global Industrial Portable Electric Salamander Heater, 30 kW, 3-Phase
Type And Output: High-capacity industrial portable salamander rated at 30 kW, 480V, 3-phase. Designed for large industrial halls or heavy-duty job sites.
Key Features: Heavy-duty construction with 10″ wheels for mobility, built for direct-wire installation, and requires a 50-amp (or larger) circuit and appropriate three-phase distribution.
Best For: Industrial settings, large garages, or sites requiring very high heat output where three-phase power is available. Portability with wheels makes repositioning practical on sites with hard wiring.
Installation And Safety Notes: Three-phase, high-voltage connection demands qualified electricians and site planning. Confirm cable routing, breaker sizing, and service capacity before procurement.
BLACK+DECKER Portable Space Heater With Carry Handle
Type And Output: Compact portable room heater with selectable heat at 750W or 1500W. Intended for personal or small-room use on standard 120V circuits.
Key Features: Lightweight design with carry handle, adjustable thermostat control, three modes (low, high, fan), and a 6-foot power cord for flexible placement.
Best For: Desks, small workstations, or areas where localized, low-power heating is sufficient. Not a salamander-style industrial heater but useful for targeted personal warmth in a garage or attached workspace.
Installation And Safety Notes: Plugs into standard household outlets; does not require special wiring. Use away from combustible materials and follow tip-over and overheat safety guidance on the label.
Buying Guide: How To Choose A Salamander Space Heater
Selecting the right salamander space heater requires weighing power, installation, mobility, coverage, and safety. The sections below cover the primary decision factors to compare products objectively.
1. Determine Required Heating Capacity
Estimate the conditioned volume (square footage times ceiling height) and insulation level. For temporary job-site heating, choose higher wattage or BTU ratings to overcome open doors and high heat loss. Fixed garage heaters list approximate coverage in square feet—use those as planning guides.
2. Power Supply And Electrical Requirements
Match the heater to available site power: common options include 120V (small portable), 240V single-phase (10kW class), or 480V three-phase (industrial 30kW). High-output units require appropriately sized breakers and wiring. Confirm service capacity and plan for professional installation when hard-wiring or using three-phase power.
3. Installation Style: Portable Versus Fixed
Portable floor-mounted salamanders provide mobility to move heat where needed but may require heavy-duty cords or dedicated receptacles. Ceiling- or wall-mounted units free floor space and deliver more even room heating but need permanent installation and placement planning to avoid dead zones.
4. Airflow And Heat Distribution
Forced-air salamanders heat quickly and push warm air across the space. Ceiling-mounted units may rely on convective loops. Consider whether you need directional, localized heat or general area warming. For workbenches, portable fans or small directional units are effective; for full-bay warmth, ceiling or large forced-air units perform better.
5. Safety Features And Build
Look for overheat protection, tip-over sensors, safety guards, and flame-retardant materials where applicable. Rugged steel frames and guarded intakes are important on active sites. Fixed units should meet clearance specs while portable devices should include robust guards to prevent accidental contact.
6. Controls And Thermostat Accuracy
Remote controls, LED displays, and adjustable thermostats add convenience and energy savings. Precision thermostats control cycling to maintain comfort while reducing wasted energy. Consider units with timers or ECO modes for periodic operation.
7. Mobility And Footprint
Portability options include wheels, handles, and compact footprints. Larger industrial units may still be mobile but require forklift or wheel kits. Ceiling mounts maximize usable floor area at the expense of repositioning flexibility.
8. Intended Use And Environment
Clarify job-site requirements: indoor-only vs. semi-exposed environments, presence of flammable materials, and ambient conditions. Electric salamander heaters produce clean heat without combustion byproducts, making them suitable for enclosed spaces where ventilation is limited, provided electrical infrastructure supports them.
9. Maintenance And Durability
Check for accessible filters, durable fan motors, and serviceable heating elements. Heavy-duty steel housing and replaceable parts support long operational life on construction sites. Regular inspection of wiring and guards reduces downtime and safety risks.
10. Code Compliance And Professional Installation
High-capacity and hard-wired units often require permits, code compliance, and professional electricians for installation. Verify local code requirements and consult a licensed professional to ensure safe, legal installation and operation.
Tips for Getting the Best HVAC Prices
- Prioritize Quality Over Cost
The most critical factor in any HVAC project is the quality of the installation. Don’t compromise on contractor expertise just to save money. - Check for Rebates
Always research current rebates and incentives — they can significantly reduce your overall cost. - Compare Multiple Quotes
Request at least three estimates before making your choice. You can click here to get three free quotes from local professionals. These quotes include available rebates and tax credits and automatically exclude unqualified contractors. - Negotiate Smartly
Once you've chosen a contractor, use the proven strategies from our guide — How Homeowners Can Negotiate with HVAC Dealers — to get the best possible final price.
Comparison Perspectives To Consider
- Small Spaces / Personal Use: Choose low-voltage portable heaters that plug into standard outlets and include tip-over protection.
- Medium Garages / Workshops: Consider 5,000–10,000W hard-wired units or portable 10kW models depending on mobility needs and circuit availability.
- Large Or Industrial Spaces: Opt for three-phase high-kW units with professional electrical integration and robust mobility or ceiling distribution.
- Temporary Job Sites: Portable floor-mounted salamanders with strong frames and guarded intakes balance mobility and performance but check breaker availability.
- Permanent Installations: Ceiling-mounted units with integrated thermostats and remotes deliver consistent area heating and reduce floor obstructions.