Best Side-by-Side Heater Kit and Compatible Parts

Quick Intro: This guide compares parts and accessories that relate to side-by-side heater kits and closely associated heater, venting, and sealing components for small vehicles and home HVAC/venting scenarios. Use the table below to compare the selected items at a glance, then read focused product sections and a buying guide to determine fit and compatibility.

Product	Brand	Primary Use
Heater Box Lever Kit, Left Side, Compatible with Dune Buggy	Empi	Replacement heater box lever / linkage for vehicle heater boxes
ZNTVW SP20285 Horizontal Vent Termination Kit	ZNTVW	Exterior vent termination for tankless gas water heater (2″ pipe)
Stainless Steel Stove Gap Covers (ItsNio)	ItsNio	Adjustable stainless steel gap filler for stovetop/counter gaps
SUPIIRAW Stainless Steel Stove Gap Covers	SUPIIRAW	Stove-to-counter gap guards; heat resistant, adjustable
BJADE’S Window Air Conditioner Side Insulated Foam Panel	BJADE’S	Full surround insulation panel for window A/C (draft & heat control)

Heater Box Lever Kit, Left Side, Compatible With Dune Buggy

Check Price on Amazon

Brand: Empi

This part is listed as a Heater Box Lever Kit that replaces OEM part P/N: 043 298 147A. It is designed for use in heater boxes where the mechanical lever or linkage controls damper position or airflow direction inside vehicle heater housings.

Features referenced: replacement for an OEM number and left-side orientation. Key installation considerations include verifying compatibility with your heater box model, confirming left vs. right side orientation, and ensuring the lever geometry matches existing linkages. This product is most relevant for restorations, repairs, or replacements where the original lever has broken or worn out.

When evaluating fit, check mounting points, shaft diameter, and travel range. This lever kit addresses mechanical actuation rather than electrical heating elements or blower components.

ZNTVW SP20285 Horizontal Vent Termination Kit

Check Price on Amazon

Brand: ZNTVW

This horizontal vent termination kit is specified for 2-inch PVC or ABS vent piping and is intended for exterior wall termination of tankless gas water heaters or similar high-efficiency appliances. The listing highlights ventilation performance and exterior aesthetics.

Notable features: improves exterior appearance compared to exposed pipework, paintable surface for matching, and defined center-to-center dimension (5.5 inches). The product emphasizes ensuring correct pipe diameter and confirming compatibility with the appliance’s venting requirements.

For heater kit projects that require safe exhaust/air intake termination, this termination kit addresses the final exterior termination point rather than internal heater components. Verify local code and manufacturer venting guidelines before installation.

Stainless Steel Stove Gap Covers, Range Trim Kit (ItsNio)

Check Price on Amazon

Brand: ItsNio

Although marketed as a stove gap cover, this stainless steel, telescoping range trim kit offers heat-resistant sealing for gaps between appliances and surrounding surfaces. Adjustable length ranges from 13.8″ to 27.5″ and is suitable for gap widths between approximately 2 mm and 17 mm (0.08″–0.7″).

Key product features include a telescoping stainless construction that resists melting or warping from heat exposure, easy cleaning, and a design to keep debris out of tight seams. The listing includes a usage note advising that the product is not suitable for uneven surfaces or gaps outside the stated range.

In contexts where side-by-side heating appliances or compact heater enclosures create small gaps, a stainless gap cover can provide a durable barrier against spills, dust, or draft paths near heat sources.

SUPIIRAW Stainless Steel Stove Gap Covers, 2 Pack

Check Price on Amazon

Brand: SUPIIRAW

This adjustable gap cover is specified to fit between 13.7″ and 27.6″ in length and is suitable for gaps from roughly 2 mm to 18 mm. It is designed to be installed without tools using a spring-bias mechanism that maintains a snug fit.

Features highlighted: easy installation and removal, dishwasher-safe materials or simple wiping for cleaning, and prevention of debris and spills from entering narrow seams between stoves, countertops, or adjacent appliances. The product is framed around keeping cooking areas cleaner and reducing hidden grime accumulation.

For heater kits positioned next to other equipment or cabinetry, this product can reduce unwanted airflow and prevent foreign matter from contacting heater surfaces. Confirm gap width and surface flatness for proper performance.

BJADE’S Window Air Conditioner Side Insulated Foam Panel

Check Price on Amazon

Brand: BJADE’S

This insulated panel kit is a one-piece surround for window air conditioners intended to improve sealing, reduce drafts, and help manage heat transfer. It includes heat-resistant insulating foam with a PVC surface and is sized to fit many 5000–12000 BTU window A/C units, up to about 39″ frame width.

Features of interest: energy-saving draft sealing, aesthetic finish with leather-textured PVC, easy cutting for sizing, and included double-sided tape for attachment. The listing positions this product as useful for both summer and winter sealing to reduce infiltration.

In heater-related installations where a window-mounted heating/cooling device or enclosure requires improved sealing, these panels can reduce loss and unintended draft paths adjacent to the heater footprint.

Buying Guide: How To Choose Parts For Side-By-Side Heater Installations

Selecting components for a side-by-side heater kit or related heater/venting sealing requires attention to fit, material compatibility, and safety. Below are key considerations and comparison perspectives to guide purchasing decisions.

Compatibility And Fit

• Model And OEM Numbers: For replacement parts such as heater levers, verify OEM part numbers and left/right orientation. Small discrepancies in shaft size or mounting bosses can cause improper operation.
• Pipe Size And Venting: For vent termination kits, confirm pipe diameter (for example, 2-inch specified). Ensure the termination matches manufacturer venting requirements and local code.
• Gap Dimensions: For gap covers, measure gap width and length precisely. Most of the adjustable stainless covers here target gaps from ~2 mm to 17–18 mm and lengths ~13.8″–27.6″.

Material And Heat Resistance

• Stainless Steel vs. Silicone: Stainless steel gap covers resist melting and discoloration around high heat sources; silicone or rubber alternatives can be easier to compress but may degrade with sustained high temperatures.
• Corrosion Resistance: For outdoor vent terminations and any component exposed to combustion byproducts, choose materials rated for corrosion resistance and weather exposure.

Functionality And Installation

• Ease Of Installation: Some products (spring-fit gap covers, adhesive-backed insulation panels) are tool-free; replacement levers or vent kits may require mechanical fastening and basic tools.
• Service Access: Consider how frequently the area requires service. Removable gap covers or panels simplify cleaning and maintenance; permanent adhesives can complicate future repairs.

Safety And Code Considerations

• Vent Clearances And Codes: Exhaust and intake terminations must meet clearance requirements in appliance manuals and local building codes. Incorrect venting can create safety risks.
• Heat Clearance: Maintain recommended clearances from combustible materials. Gap covers should not be used to conceal damage or to reduce required clearances around heaters.
• Material Ratings: Use only materials rated for the expected temperatures and exposure (e.g., stainless steel for high-heat appliance seams).

Durability, Maintenance, And Cleaning

• Cleaning Frequency: Choose dishwasher-safe or easily wiped materials if the area is exposed to grease or soot. Stainless steel models typically clean easily and resist staining.
• Replacement Parts Availability: For mechanical heater components, pick parts that have clear OEM references and are available as replacements to simplify future servicing.

Comparison Perspectives

• Vehicle Heater Linkage vs. Home HVAC: Vehicle heater box levers serve a mechanical control function and must match exact geometry; home vent and sealing products focus on airflow management and weather/contaminant control.
• Temporary vs. Permanent Fixes: For temporary sealing or cosmetic improvements, removable panels or spring-fit gap covers work well. For permanent system venting, use code-compliant termination kits and professional installation where required.
• Cost vs. Performance: Consider lifecycle costs—durable stainless steel or properly sized vent terminations may cost more initially but reduce replacement frequency and safety risk.

Final Tip: Always cross-reference product specifications with the heater or appliance manufacturer’s installation instructions and local codes before purchasing or installing parts. When in doubt about venting, clearances, or compatibility, consult a qualified HVAC or mechanical technician.