Best UL Listed Space Heater for Garage and Workshop

Choosing a UL-listed space heater for garages, workshops, or commercial areas means prioritizing safety, performance, and code compliance. The table below summarizes five UL/ETL-certified or heavy-duty electric heaters suitable for larger spaces and shop environments.

Product	Type	Power / Coverage	Certifications
HICFM 240V Electric Garage Heater 4800W	Fan-Forced Garage Heater	4800W / Up To 500 ft²	UL Listed (Product Listing)
Dr. Heater DR966 240V Hardwired Shop Heater	Hardwired Commercial Heater	3000W / 6000W Modes	Commercial Grade (manufacturer spec)
DR. INFRARED HEATER DR-975 7500W	Hardwired Wall/Ceiling Heater	4700W / 7500W	Heavy Duty Shop Heater
BJOP 2025 Portable Space Heater	PTC Ceramic Portable Heater	900W / 1500W For Rooms	ETL & UL Certified
Dreo 1500W Portable Electric Heater	PTC Ceramic Portable Heater	1500W For Indoor Use	ETL Certified / Safety Features

HICFM 240V Electric Garage Heater 4800W

Check Price on Amazon

This fan-forced industrial heater is designed for workshops and garages. The unit offers 4,800 watts of power and a reported coverage up to 500 ft² depending on insulation and ceiling height. The product highlights fast heat-up performance and a built-in thermostat for temperature control.

• Power And Performance: 4,800W fan-forced design that claims rapid temperature rise (example: 8℃ in a 200 ft² area within 5 minutes under test conditions).
• Controls: Integrated thermostat control for setpoint adjustment and maintaining a target temperature.
• Durability: Enclosed TEAO AC motor and aluminum blade for consistent airflow; specified maximum air speed 3.6 m/s.
• Usage Note: Manufacturer states not suitable for typical home living spaces—targeted at commercial/industrial areas.

For applications requiring a fixed 240V supply and a high-output fan-forced heater in a garage or shop, this unit lists features oriented to longevity and rapid airflow-based heat distribution.

Dr. Heater DR966 240-Volt Hardwired Shop Heater

Check Price on Amazon

The DR966 is a heavy-duty, hardwired 240V heater with selectable power output. It is built for commercial or shop environments where a hardwired installation and robust heat capacity are needed.

• Dual Power Modes: Switchable between 3,000W and 6,000W, allowing reduced electrical load or full output as required.
• Airflow: Includes an 8-inch fan intended to deliver high airflow with low turbulence for even temperature distribution.
• Installation: Hardwired—8 AWG copper wiring recommended. No power cord included; professional wiring typically required.
• Thermostat: Adjustable thermostat with high and low settings for basic temperature regulation.

This model is aimed at installations that need flexible wattage and hardwired reliability. It can fit garages and small commercial spaces where 240V connections are available and wiring meets local electrical codes.

DR. INFRARED HEATER DR-975 7500-Watt Hardwired Heater

Check Price on Amazon

The DR-975 is a high-capacity, wall or ceiling mountable 240V heater designed for larger shops or garages. It offers high wattage options for spaces that demand stronger heat output.

• High Output Options: Configurable for 4,700W or up to 7,500W as specified by model configuration and supply capability.
• Hardwired Design: Intended for permanent installation; requires suitable gauge wiring and electrical work.
• Remote Thermostat: Remote-controlled thermostat allows setpoint control between specified manufacturer ranges for convenience and zoned control.
• Mounting Flexibility: Can be ceiling or wall mounted to suit shop layout and optimize airflow direction.

This heater targets installations that require high heat density and permanent mounting. It is common in professional garages and larger workshop bays where electrical service can support the load.

BJOP 2025 Portable Space Heater ETL & UL Certified

Check Price on Amazon

The BJOP 2025 is a portable PTC ceramic heater aimed at indoor living spaces but carries both ETL and UL certifications for electrical safety. It blends quieter operation with multiple safety cutoffs.

• Certifications: ETL & UL certified, with tip-over and overheat protection and a delayed shutdown feature.
• Modes And Power: Multi-mode operation including ECO, Low (900W), High (1500W), and Fan mode. Thermostat range adjusts automatically in ECO mode.
• Quiet Operation: Advanced oblique airflow design claims reduced noise (reported 35–40 dB), suitable for bedrooms or smaller shop offices.
• Safety Features: Automatic shutoff on tip-over or overheat; built-in timer and remote control for hands-off operation.

While this unit targets indoor rooms, its UL/ETL safety certifications and compact portability make it suitable for smaller enclosed workshop offices or areas where a standard 120V outlet is the constraint.

Dreo Space Heater 1500W Portable With Thermostat

Check Price on Amazon

Dreo’s portable heater uses a PTC element with an enhanced heat funnel for faster warm air delivery. It emphasizes safety certifications and precise thermostat control for indoor use.

• Heat Delivery: 1500W PTC system with a funnel design intended to push warm air farther than traditional portable heaters.
• Safety And Certifications: ETL-certified features including a tilt-detection sensor, overheat protection, and flame-retardant materials.
• Temperature Control: NTC chipset allows fine 1°F increments across a wide setpoint range for efficient energy use and stable comfort.
• Use Case: Suited for bedrooms, home offices, and small workshop offices where 120V portability and user-friendly controls are priorities.

Dreo is positioned as a consumer-grade UL/ETL-certified heater with advanced control precision, useful for indoor environments where safety and accurate thermostat control matter.

Buying Guide: How To Choose A UL Listed Space Heater

Selecting a UL-listed space heater requires assessing electrical compatibility, safety certifications, power needs, and installation constraints. Below are key factors to compare when choosing a heater for a garage, workshop, or indoor workspace.

Safety Certifications And Listings

UL, ETL, or CSA listings indicate evaluation to consensus safety standards. For professional or code-sensitive installations, prefer heaters explicitly labeled as UL-listed or ETL-certified. Check the product documentation for listed standards and intended use (indoor, outdoor, garage, commercial).

Power Source And Electrical Requirements

Confirm the voltage and current requirements. Hardwired 240V heaters (3,000W–7,500W) demand appropriate wiring and often professional installation. Portable 120V models (typically up to 1,500W) plug into standard outlets but provide less heat. Match the heater to available circuits and breaker capacity.

Heating Method And Distribution

Fan-forced heaters move warm air quickly and provide broader room mixing. Ceramic PTC units offer self-regulating heat elements and quieter operation. For high ceilings or large open shops, higher wattage and directional wall/ceiling mounting improve distribution.

Control And Thermostat Precision

Look for adjustable thermostats and remote control features when maintaining a target temperature is important. Digital thermostats with small setpoint increments (1°F) improve energy efficiency and occupant comfort.

Safety Features

Essential safety features include tip-over protection, overheat cutoff, grounded plugs or hardwired grounding where applicable, and flame-retardant materials. For garages with flammable vapors, follow local codes regarding approved equipment and ventilation.

Installation And Mounting

Decide between portable units, wall-mounted, or ceiling-mounted models. Hardwired heaters require more permanent installation and spacing considerations. Verify clearances to combustible materials and recommended mounting heights in the manual.

Noise And Fan Characteristics

If the heater will run in workspaces where conversation or phone calls occur, consider fan noise ratings. PTC ceramic heaters often run quieter than large fan-forced commercial units.

Duty Cycle And Durability

Commercial garage heaters usually have more robust motors and metal enclosures rated for continuous or long-run operation. Check motor enclosure ratings and manufacturer guidance for intended environments (dusty, damp, or corrosive conditions).

Coverage And Heat Output

Estimate effective coverage based on insulation and ceiling height. Manufacturers provide approximate square footage, but real-world performance varies. For garages with large volumes, target higher wattage or multiple distributed units.

Compliance With Local Codes

Confirm compliance with local electrical codes and building regulations. Hardwired 240V installations may require permits and electrician installation; portable units may be restricted in certain commercial settings.

Comparison Perspectives

• High-Capacity Shop Use: Choose hardwired 240V units (DR-975, DR966, HICFM) for sustained, high-output heating and permanent installation.
• Small Office Or Insulated Garage: Portable 1500W ETL/UL models (Dreo, BJOP) offer safe, plug-in convenience with certification-backed protections.
• Noise-Sensitive Areas: PTC ceramic units typically provide lower operational noise whereas fan-forced industrial units are louder but move more air.
• Safety-Focused Selection: Prioritize certified models with tip-over and overheat protections; for commercial spaces, confirm UL listing or equivalent.

When comparing models, cross-check the product’s certification statements, installation requirements, and intended use to ensure the heater matches both safety expectations and heating needs.