Best Mobile Home Gas Heaters for Efficient Heating

Choosing the right gas heater for a mobile home means balancing space constraints, venting requirements, and heat output. Below is a concise comparison table of selected gas heaters suited for mobile-home use. The reviews that follow summarize each product’s key features and practical considerations to help you compare vented, ventless, infrared, and blue-flame options.

Product	Type	Max BTU	Coverage	Notable Feature
Comfort Glow 17,000 BTU Wall Heater	Direct Vent Wall Heater	17,000	Up to 570 sq. ft.	Sealed burn system, Piezo ignition
Dyna-Glo IR30NMDG-1 Infrared Wall Heater	Infrared Wall Heater	30,000	Up to 1,000 sq. ft.	Infrared radiant heat
ProCom MN300TPA-B Ventless Infrared	Ventless Infrared	30,000	Up to 1,400 sq. ft.	Thermostat control, wall or floor mount
ProCom MN300TBA-B Ventless Blue Flame	Ventless Blue Flame	30,000	Up to 1,400 sq. ft.	Thermostat control, even room heating
ProCom MN300HBA-B Manual Blue Flame	Ventless Blue Flame	30,000	Up to 1,400 sq. ft.	Manual control, ODS safety shutoff

Comfort Glow 17,000 BTU Wall Heater

Check Price on Amazon

This direct vent natural gas wall heater produces 17,000 BTU and is designed to heat spaces up to approximately 570 sq. ft. The unit features a sealed burn system with a matchless Piezo ignition and a safety pilot with a built-in pressure regulator that stops gas flow if the pilot is extinguished. Its compact wall-mount design frees floor space while providing vented combustion to the outside, which helps maintain indoor air quality.

Vented operation makes this model suitable where mobile home codes or occupant preferences favor outdoor combustion air. Dimensions (20 H, 27.3 W, 6.5 D) allow placement in tighter wall cavities, but installation requires proper venting and adherence to clearances. Consider professional installation to confirm vent routing and fuel line compatibility with mobile-home systems.

Dyna-Glo IR30NMDG-1 30,000 BTU Infrared

Check Price on Amazon

The Dyna-Glo IR30NMDG-1 uses infrared technology to warm objects and people directly rather than simply heating the air. With up to 30,000 BTU, it claims coverage up to about 1,000 sq. ft. Infrared units provide quick perceptible warmth and can be effective in rooms with higher ceilings or intermittent use.

This model is designed for natural gas and does not permit fuel conversion. Infrared radiant heat can feel more efficient in specific use cases but requires careful placement so the radiant path reaches occupied areas. The vented wall configuration allows combustion gasses to be directed outside, preserving indoor air quality, which is often preferred for long-term occupancy in mobile homes.

ProCom MN300TPA-B Ventless Infrared Heater

Check Price on Amazon

The ProCom MN300TPA-B is a ventless infrared heater delivering up to 30,000 BTU, with stated capacity up to 1,400 sq. ft. It includes built-in thermostat control with settings for High/Medium/Low, plus mounting hardware and base feet for floor placement. Ventless infrared units transfer heat directly and can operate without venting to the outdoors.

Because it is ventless, this heater combusts indoors and relies on the living space for combustion air. That design offers simpler installation and higher on-paper efficiency, but local codes and mobile-home manufacturer recommendations may restrict ventless gas appliances. The model’s thermostat and compact profile make it adaptable for different room sizes; verify oxygen depletion sensors and local ventilation requirements before installation.

ProCom MN300TBA-B Ventless Blue Flame Heater

Check Price on Amazon

This ProCom model uses a blue-flame burner to provide convective heat and even room warming across the space. Rated at 30,000 BTU with thermostat control and the same up-to-1,400 sq. ft. heating claim as other ProCom models, blue-flame heaters typically distribute heat through warm surface convection rather than direct radiant beams.

Ventless blue-flame units are often chosen for evenly warming whole rooms rather than spot-heating. They require consideration of indoor combustion and must include safety features like oxygen depletion sensors (ODS). The included wall mount and base feet allow flexibility in placement, but confirm mobile-home code compatibility and ensure adequate ventilation and CO detection if installed.

ProCom MN300HBA-B Manual Blue Flame Heater

Check Price on Amazon

The ProCom MN300HBA-B is a manual control blue-flame ventless heater that offers three heat settings (Low/Medium/High) and a push-button Piezo ignition. With a maximum of 30,000 BTU and a claimed heating area up to 1,400 sq. ft., it runs on natural gas without requiring electricity, which can be an advantage during power outages.

Key safety features include an Oxygen Depletion Sensor (ODS) that automatically shuts the unit off if oxygen levels drop below safe thresholds. Manual control models can be simpler to operate but lack an automatic thermostat. For mobile-home installations, confirm manufacturer guidance and local code allowances for ventless appliances and follow CO/combustion-gas monitoring best practices.

Buying Guide: Selecting A Gas Heater For A Mobile Home

Choosing the right gas heater for a mobile home involves more than BTU ratings. Below are the key considerations to evaluate before purchase and installation.

1. Vented vs Ventless

• Vented (Direct Vent/Sealed Combustion): Draws combustion air from outside and exhausts directly outdoors. Preserves indoor air quality and is often required by code for continuous use in living spaces.
• Ventless (Unvented): Simple installation and higher apparent efficiency because no heat is lost to venting. However, it releases combustion by-products into the living space and may be restricted or discouraged in mobile homes.

2. Heat Technology

• Infrared (Radiant): Warms people and objects directly. Good for spot heating or spaces where quick, perceptible warmth is needed.
• Blue-Flame (Convective): Produces even room heating by warming air. Better for whole-room comfort and maintaining ambient temperature.

3. BTU Output And Coverage

Match BTU output to the conditioned area. Oversized heaters cycle on/off more and may cause uneven temperatures. Consider insulation, ceiling height, and layout when estimating required BTUs.

4. Safety Features

• Oxygen Depletion Sensor (ODS): Shuts the heater off if oxygen levels fall dangerously low; essential for ventless units.
• Sealed Combustion/Pressure Regulators: For vented units, these maintain safe combustion and shut gas flow if the pilot goes out.
• CO and Smoke Detectors: Required whenever combustion appliances are present—install and test regularly.

5. Mobile-Home Codes And Manufacturer Recommendations

Mobile homes may have unique ventilation, structural, and electrical constraints. Check the mobile home manufacturer’s guidelines and local building codes for approved heating appliances and venting requirements. Some jurisdictions restrict ventless gas appliances in manufactured homes.

6. Fuel Type And Conversion

Confirm the heater’s fuel type (natural gas vs propane). Some units do not permit conversion; others require a certified conversion kit and professional installation. Match the unit to your mobile home’s gas supply and pressure.

7. Installation And Clearances

Wall-mounted heaters require specific clearances from walls, floors, and combustible materials. Venting requires through-wall or through-roof terminations that meet clearance and draft requirements. Professional installation ensures compliance with gas codes and safe operation.

8. Control Options

• Thermostat Control: Allows automatic temperature regulation and more comfortable, consistent heating.
• Manual Control: Simpler design and can operate without electricity, but requires manual adjustment and monitoring.

9. Efficiency, Vent Losses, And Real-World Performance

Vented appliances lose some heat via exhaust but improve indoor air quality. Ventless units may have higher space-heating efficiency but introduce combustion by-products into the home. Consider how often and how long the heater will run—short, spot heating vs continuous whole-home heating affects which technology is preferable.

10. Safety Equipment And Monitoring

Install carbon monoxide detectors near sleeping areas and ensure smoke alarms are functional. For ventless installations, ensure adequate ventilation in adjoining rooms and follow ODS maintenance guidance.

11. Noise, Aesthetics, And Placement

Consider noise level (fan vs convective), visual profile, and whether the unit will obstruct traffic paths. Wall-mounted units can save floor space; some models include base feet for floor placement when wall installation is not feasible.

12. Warranty And Support

Check manufacturer warranties, availability of replacement parts, and access to local service providers experienced with the brand. Warranties vary by component and duration, affecting long-term ownership costs.

13. Comparison Perspectives

• Short-Term/Intermittent Use: Infrared radiant or ventless options provide quick heat and may be sufficient for periodic use if allowed.
• Continuous Whole-Home Use: Vented units help maintain indoor air quality and are often preferred for extended, daily operation.
• Power Outage Scenarios: Manual ignition, piezo ignition, and non-electric models remain operable without grid power.

Before purchasing, verify that the selected model is permitted in your state and mobile-home setup, and consult a qualified installer to confirm fuel connections, venting, and safety device compatibility. Proper installation and ongoing maintenance are essential to safe, efficient operation.