Choosing the right waste oil heater kit or replacement parts is critical for consistent performance and safe operation. Below is a quick comparison of five relevant products selected for common waste oil heater models, tune-up kits, nozzles, and oil-cleaning solutions.
| Product | Primary Use | Compatible Models / Notes |
|---|---|---|
| Lynn Manufacturing Replacement Reznor Kit | Door insulation & gasket kit | Reznor RA / RAD series (selected sizes) |
| AUTOVIC Lanair Tune Up Kit | Tune-up parts for Lanair heaters | Fits Lanair MX150/200/250/300, HI140/320 |
| MOTOQUEEN Lanair Diaphragm 3-Pack | Replacement diaphragm parts | Fits Lanair FI/HI/MX series (OEM 9871) |
| Waste Oil Heater Nozzle (Xspeedonline) | Nozzle replacement for Reznor/Clean Burn | Part numbers 30609-5, 102997; fits RA/RV models |
| WVO Designs Waste Oil Centrifuge | Oil cleaning before use as fuel | Processes up to 25 gal/hr; removes dirt & water |
Content Navigation
- Lynn Manufacturing Replacement Reznor Waste Oil Heater Kit
- AUTOVIC Lanair Waste Oil Heater Tune Up Kit
- MOTOQUEEN Waste Oil Heater Parts For LANAIR Diaphragm 3-Pack
- Waste Oil Heater Nozzle 30609-5 / 102997 For Reznor & Clean Burn
- WVO Designs Waste Oil Centrifuge For Cleaning Oils
- Buying Guide: How To Choose Waste Oil Heater Kits And Parts
- Compatibility And Model Fit
- Part Function And Service Role
- Material Quality And Durability
- Fuel Preparation And Contaminant Management
- Maintenance Frequency And Spare Parts Strategy
- Installation And Serviceability
- Performance And Efficiency Considerations
- Safety And Environmental Factors
- Comparison Perspectives
Lynn Manufacturing Replacement Reznor Waste Oil Heater Kit
This kit contains a tombstone-shaped ceramic fiber turning box door insulation (part 210930) and a flat fiberglass gasket (part 157690). The tombstone is sized 24″ x 15-1/2″ x 1/2″ and the gasket measures 2″ wide x 1/8″ thick and 15 feet long. It is designed to fit many Reznor RA and RAD models including 110, 140, 150, 235, 250, 350. The listing specifies it does not fit RA 500, RAD 500, or RV models.
As a door insulation and sealing kit, this product targets repairs where heat containment and door sealing affect combustion efficiency and safety. The included gasket length supports multiple cuts and installs. Compatibility notes are explicit; verify model numbers before ordering.
AUTOVIC Lanair Waste Oil Heater Tune Up Kit
The AUTOVIC kit lists fitment for Lanair MX150, MX200, MX250, MX300, HI140, HI320 and is offered as a replacement for OEM number 9871. The features emphasize high-quality material and long service life. This type of kit is typically used during routine maintenance or tune-ups to replace wear-prone components that affect combustion and fuel delivery.
Call 888-896-7031 for Free Local HVAC Quotes – Compare and Save Today!
For owners of Lanair heaters in the specified model range, this tune-up kit is presented as a direct replacement option. Confirm OEM number cross-reference and component list to ensure it contains the specific parts your service procedure requires.
MOTOQUEEN Waste Oil Heater Parts For LANAIR Diaphragm 3-Pack
This listing specifies a 3-pack of diaphragm parts compatible with LANAIR ALL FI/HI/MX Series Heaters and indicates replacement for OEM number 9871. The product is described as brand new. Diaphragms are critical in fuel metering and pump function for many waste oil heaters; degraded diaphragms can lead to inconsistent fuel flow or pump failure.
When sourcing diaphragm replacements, ensure material compatibility and recommended service intervals. The 3-pack format provides multiple spare parts for staged maintenance or multi-unit servicing. Verify exact diaphragm form factor and OEM cross-reference before installation.
Waste Oil Heater Nozzle 30609-5 / 102997 For Reznor & Clean Burn
This replacement nozzle indicates fitment for several Reznor models including RA140, RA150, RA235, RA250, RV225, RV325 and lists part numbers 30609-5 and 102997. Nozzles directly influence spray pattern, atomization, and combustion quality in waste oil burners. Matching the correct part number to your burner model is essential for reliable ignition and efficient fuel use.
Call 888-896-7031 for Free Local HVAC Quotes – Compare and Save Today!
Use nozzles that match OEM specifications for spray angle and flow characteristics. Installing the correct nozzle can improve burn efficiency and reduce soot production. Confirm model fitment and part number alignment before replacing combustion nozzles.
WVO Designs Waste Oil Centrifuge For Cleaning Oils
The WVO Designs centrifuge is a mechanical cleaning device designed to process used oils including waste vegetable oil, motor oil, hydraulic oil, and machining fluids. It is specified to process up to 25 gallons per hour and to extract dirt and water to produce fuel-quality oil suitable for furnaces or diesel engines. The product description highlights use cases across a range of waste oils.
For waste oil heater owners, pre-cleaning fuel reduces nozzle clogging, water-induced combustion issues, and particulate buildup. A centrifuge provides a non-chemical method to separate contaminants and water, improving consistency and potentially extending burner component life. Evaluate throughput and feed material compatibility relative to your usage patterns.
Buying Guide: How To Choose Waste Oil Heater Kits And Parts
Selecting the right kit or part for a waste oil heater requires attention to compatibility, fuel quality, and maintenance practices. Below are the primary considerations to compare across products.
Compatibility And Model Fit
- Verify OEM numbers and model lists: Many parts list OEM cross-references (e.g., 9871, 30609-5, 102997). Confirm these against your heater’s service manual.
- Note exclusions: Some kits are explicitly incompatible with certain models (for example, Lynn Manufacturing lists RA 500 and RV models as excluded).
Part Function And Service Role
- Insulation & gaskets: Parts such as ceramic fiber turning box insulation and door gaskets affect heat containment and sealing, impacting combustion stability.
- Diaphragms & tune-up kits: Fuel system components control pressure and flow; replacing worn parts restores consistent fuel delivery.
- Nozzles: Affect atomization and spray pattern. Correct nozzle selection directly influences combustion quality and emissions.
- Oil cleaning equipment: Centrifuges and filtration remove water and solids to protect pumps, nozzles, and combustion chambers.
Material Quality And Durability
- Heat-resistant materials: Insulation and gasket materials should be specified for high-temperature service to avoid quick degradation.
- Elastomer compatibility: Diaphragms and seals must be compatible with waste oil chemistry and temperature ranges.
- Construction for centrifuges: Look for robust housing and reliable bearings if processing heavier fluids frequently.
Fuel Preparation And Contaminant Management
- Remove water and particulates: Pre-cleaning fuel with centrifuges or filtration prevents nozzle blockages and poor combustion.
- Fuel consistency: Maintaining a stable fuel blend reduces soot and improves ignition reliability.
Maintenance Frequency And Spare Parts Strategy
- Keep spare consumables: Nozzles, diaphragms, and gaskets typically require periodic replacement. Multi-packs can reduce downtime.
- Plan routine inspections: Inspect seals, insulation, and combustion components for wear; schedule tune-ups per manufacturer guidance.
Installation And Serviceability
- Match part geometry: Ensure gasket and insulation sizes align with door and turning box dimensions to avoid leaks.
- Ease of replacement: Consider parts that come with clear fitment information and are straightforward to install to minimize service time.
Performance And Efficiency Considerations
- Combustion impact: Using the correct nozzle and maintaining clean fuel directly influences heat output and efficiency.
- Sealing integrity: Proper insulation and gaskets reduce heat loss and improve fuel burn completeness.
Safety And Environmental Factors
- Prevent leaks and smoke: Proper sealing and correct nozzle selection help minimize smoke and unburned emissions.
- Handle fuel safely: Use approved containers and transfer systems when handling waste oils; remove water before burning to avoid steam-related hazards.
Comparison Perspectives
- Parts vs. Complete Solutions: Kits like Lynn Manufacturing focus on insulation/gasket replacement; tune-up kits and diaphragms address fuel delivery; centrifuges address fuel quality upstream.
- Short-Term Repair vs. Long-Term Reliability: Single-component replacements can restore operation quickly; investing in fuel cleaning reduces long-term wear and service needs.
- OEM Cross-Reference vs. Aftermarket Fit: Confirm aftermarket parts meet OEM specs for flow, materials, and dimensions to ensure compatibility.
When selecting parts, prioritize accurate model fit, material suitability for high-temperature and waste oil exposure, and the relationship between fuel preparation and furnace reliability. Using the appropriate combination of replacement parts and fuel-cleaning equipment supports consistent performance and extends the life of waste oil heating systems.
Tips for Getting the Best HVAC Prices
- Prioritize Quality Over Cost
The most critical factor in any HVAC project is the quality of the installation. Don’t compromise on contractor expertise just to save money. - Check for Rebates
Always research current rebates and incentives — they can significantly reduce your overall cost. - Compare Multiple Quotes
Request at least three estimates before making your choice. You can click here to get three free quotes from local professionals. These quotes include available rebates and tax credits and automatically exclude unqualified contractors. - Negotiate Smartly
Once you've chosen a contractor, use the proven strategies from our guide — How Homeowners Can Negotiate with HVAC Dealers — to get the best possible final price.