Buyers checking EH price fire dampers and similar models typically pay $150-$1,200 per damper depending on size, rating, and actuator type. Main cost drivers are damper size (duct opening), fire-rating (1‑hour vs 3‑hour), motorized versus blade-only, and installation complexity.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Small Sidewall/Low-Profile Fire Damper (8×8–12×12) | $150 | $300 | $550 | Assumptions: single blade, static, 1‑hour rating. |
| Standard Ceiling/Wall Fire Damper (12×12–24×24) | $250 | $450 | $900 | Assumptions: galvanized steel, 1–2 hour rating, manual. |
| Motorized Fire Damper with Actuator | $400 | $750 | $1,200 | Assumptions: electric actuator, 24V/120V options. |
| Installed (per damper) | $350 | $700 | $1,800 | Assumptions: 1–3 hours labor, basic access; excludes permits. |
Content Navigation
- Typical Total Price For EH-Style Fire Dampers By Size and Rating
- How Materials, Labor, Equipment, and Permits Affect the Quote
- Which Site Variables Change a Fire Damper Price Most
- Practical Ways To Reduce Fire Damper Price On an EH-Type Purchase
- Regional Price Variations and What To Budget By Market
- Common Add-Ons, Fees, and Hidden Costs To Watch For
- Three Real-World Quote Examples With Specs and Totals
Typical Total Price For EH-Style Fire Dampers By Size and Rating
EH price fire dampers often fall into the same market bands as comparable UL-listed models; small 1‑hour dampers cost less while large 3‑hour motorized units are expensive. Expect $150-$550 for small non-motorized units, $300-$900 for typical wall/ceiling sizes, and $400-$1,200 for motorized or specialty models.
Assumptions: Midwestern U.S. pricing, standard galvanized steel, UL555 listing, normal site access.
How Materials, Labor, Equipment, and Permits Affect the Quote
| Materials | Labor | Equipment | Permits |
|---|---|---|---|
| $100-$900 per damper (size, stainless, specialty) | $75-$125 per hour; 1–4 hours typical | $0-$200 (lifts, scaffolding rental) | $0-$300 per permit/inspection |
Material selection and required on-site work usually split the estimate roughly 40% materials / 50% labor / 10% equipment & permits for most installs.
Which Site Variables Change a Fire Damper Price Most
Several concrete variables shift a final quote: damper opening size, fire-rating, and actuator type. For example, increasing from a 12×12 to 36×36 opening can raise material cost from about $300 to $800+, while moving from 1‑hour to 3‑hour listing can add 20%–50%.
Call 888-896-7031 for Free Local HVAC Quotes – Compare and Save Today!
Two niche drivers: 1) Long duct runs or linear actuators — runs over 25 linear feet may need remote actuators or junction boxes adding $150-$400. 2) Access and ceiling type — ceiling lifts/scaffold for heights over 12 feet typically add $200-$800 in labor/equipment.
Practical Ways To Reduce Fire Damper Price On an EH-Type Purchase
Buyers control price via scope choices and prep work. Choosing a manual blade damper instead of motorized where code allows saves $250-$800 per unit.
- Consolidate multiple dampers into a single access zone to reduce scaffolding time.
- Provide clear access and remove obstructions before crew arrival to avoid overtime.
- Use standard sizes where possible; custom sizes increase lead time and cost.
- Bundle purchase and install from one contractor for a lower per-unit labor rate.
Regional Price Variations and What To Budget By Market
Prices vary with local labor and supply conditions: coastal urban areas typically run 10%–25% higher than Midwest or rural markets.
| Region | Typical Installed Range | Delta vs Midwest |
|---|---|---|
| Midwest/Suburban | $350-$700 per damper | Baseline |
| Northeast/Coastal City | $450-$900 per damper | +15% to +25% |
| South/Low-Cost Metro | $300-$650 per damper | -5% to +5% |
Common Add-Ons, Fees, and Hidden Costs To Watch For
Buyers often see extras that raise the final invoice. Allow for permit/inspection fees, non-standard actuator wiring, firestop sealing, and disposal of old dampers, which together can add $150-$700 per location.
- Testing and certification after install: $75-$250 per damper.
- Firestopping/flashing around wall or floor openings: $50-$300 per penetration.
- Emergency rush orders or expedited shipping for specialty EH parts: $50-$300 extra.
Three Real-World Quote Examples With Specs and Totals
| Scenario | Specs | Labor Hours | Per-Unit Price | Total Installed |
|---|---|---|---|---|
| Small Office Retrofit | 1× 12×12 manual, 1‑hr | 1.5 hours | $250 | $525 |
| Hospital Corridor Upgrade | 4× 24×24 motorized, 2‑hr, remote wiring | 12 hours | $900 | $4,200 |
| Warehouse New Build | 10× mixed sizes, manual & motorized | 20 hours | $350-$1,000 | $5,500-$11,000 |
Assumptions: contractor includes basic testing; excludes major structural modifications.
Tips for Getting the Best HVAC Prices
- Prioritize Quality Over Cost
The most critical factor in any HVAC project is the quality of the installation. Don’t compromise on contractor expertise just to save money. - Check for Rebates
Always research current rebates and incentives — they can significantly reduce your overall cost. - Compare Multiple Quotes
Request at least three estimates before making your choice. You can click here to get three free quotes from local professionals. These quotes include available rebates and tax credits and automatically exclude unqualified contractors. - Negotiate Smartly
Once you've chosen a contractor, use the proven strategies from our guide — How Homeowners Can Negotiate with HVAC Dealers — to get the best possible final price.