Buyers typically pay $250-$1,200 for a Tempstar evaporator coil depending on size, configuration, and whether installation is included; major drivers are coil type, system compatibility, and labor. This Tempstar evaporator coil price article shows total pricing, per-unit rates, and the variables that change a final quote for U.S. homes.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Replacement Coil (part only) | $250 | $450 | $900 | Typical residential A-coil or evaporator coil; depends on model and cabinet size |
| Installed Replacement | $600 | $1,050 | $2,000 | Includes labor, refrigerant, small charge/disposal; duct access standard |
| High-Mileage or OEM Special | $500 | $900 | $1,200 | Scroll/stacked or specialty coated coils |
| Emergency or Tight-Access Install | $800 | $1,500 | $2,800 | Attic drops, crawlspaces, or structural work increase cost |
Content Navigation
- What a Typical Tempstar Evaporator Coil Replacement Costs
- Line-Item Cost Breakdown for a Coil Quote
- How Coil Type and Size Change the Final Price
- Site Conditions That Often Add to the Price
- Practical Ways To Reduce Tempstar Coil Pricing
- Regional Price Differences and What To Expect
- Common Add-Ons and Fees That Affect Final Quotes
- Three Real-World Quote Examples For Budget Planning
What a Typical Tempstar Evaporator Coil Replacement Costs
Assumptions: Single-family home, split-system, 2–3 ton AC, normal attic or closet access, standard copper/aluminum coils.
Most homeowners pay $600-$1,200 for a complete coil replacement including labor and refrigerant recharge. Parts-only replacements run $250-$900 depending on OEM vs aftermarket and cabinet size. Per-ton pricing for coils often falls in $125-$450 per ton for part cost; installed per-ton effective cost averages $300-$700 per ton when labor is included.
Line-Item Cost Breakdown for a Coil Quote
| Materials | Labor | Equipment | Delivery/Disposal | Contingency |
|---|---|---|---|---|
| $250-$900 (coil, gaskets, small parts) | $300-$900 (2-6 hours; $75-$150/hr) | $0-$150 (vacuum pump rental, manifold) | $25-$150 (old coil disposal, hauling) | $50-$300 (unexpected leaks or access work) |
The two largest line items are the coil material and technician labor. Use the mini formula: to estimate labor: 3–6 hours × $75–$150/hour typically applies for accessible units.
How Coil Type and Size Change the Final Price
Specifics: 1.5–2 ton, 2–3 ton, 3–5 ton; A-coil style vs. drain pan integrated; coated vs. bare fins.
Moving from a 2-ton to a 3.5-ton coil commonly increases part cost by 30–70% and installed cost by 20–50%. Stacked or multi-circuit coils, specialty hydrophilic coating, or OEM-matched brazing kits add $150-$500. Narrow cabinet or multi-split systems often require custom or special-order coils costing $600-$1,200+ for parts alone.
Call 888-896-7031 for Free Local HVAC Quotes – Compare and Save Today!
Site Conditions That Often Add to the Price
Tight access, attic encapsulation, or required duct/ceiling repairs can add $300-$1,500 to the invoice. Examples: attic access requiring flooring or insulation work ($200-$800), vertical drops through ceilings ($300-$1,000), or trap-out of refrigerant and reclaim fees ($75-$250). Longer refrigerant line sets or required brazing increase labor and equipment time as well.
Practical Ways To Reduce Tempstar Coil Pricing
Controlling scope and scheduling can save several hundred dollars on coil replacement. Specific actions: buy the part during off-season for lower part markup, clear attic access and remove obstacles before the tech arrives to reduce labor hours, accept aftermarket coils when warranty and fit are acceptable, and get 3 written quotes to compare labor breakdowns rather than only total price.
Regional Price Differences and What To Expect
| Region | Typical Installed Range | Delta vs. National Average |
|---|---|---|
| Northeast | $800-$1,600 | +10% to +30% |
| South | $650-$1,200 | -5% to +10% |
| Midwest | $600-$1,100 | -10% to +5% |
| West | $750-$1,700 | +5% to +40% |
Assumptions: Local wages, permitting differences, and market demand affect these ranges.
Urban markets and areas with higher HVAC labor rates typically see installed prices 10–40% above rural or low-cost regions.
Common Add-Ons and Fees That Affect Final Quotes
Watch for refrigerant charge, acid/flush treatments, and new TXV or metering device charges; these commonly add $75-$400. Typical add-ons include acid neutralizer or system flush ($100-$300), thermostatic expansion valve (TXV) replacement ($75-$250), and additional refrigerant beyond a small top-off ($40-$150 per lb depending on type). Rush service or weekend emergency calls add $150-$600.
Three Real-World Quote Examples For Budget Planning
| Scenario | Specs | Labor Hours | Total |
|---|---|---|---|
| Parts-Only Swap | Tempstar A-coil, 2.5 ton, aftermarket | 0 (owner installs) | $300 |
| Standard Replacement | OEM Tempstar coil, 3 ton, attic access | 4 hours | $1,050 ($550 parts + $400 labor + $100 misc) |
| Tight-Access Full Install | OEM fitted coil, 4 ton, attic & ceiling repairs | 8 hours | $2,300 ($900 parts + $1,200 labor/repairs + $200 refrigerant) |
These examples illustrate how access, brand match, and scope shift totals from a few hundred to a few thousand dollars.
Call 888-896-7031 for Free Local HVAC Quotes – Compare and Save Today!
Tips for Getting the Best HVAC Prices
- Prioritize Quality Over Cost
The most critical factor in any HVAC project is the quality of the installation. Don’t compromise on contractor expertise just to save money. - Check for Rebates
Always research current rebates and incentives — they can significantly reduce your overall cost. - Compare Multiple Quotes
Request at least three estimates before making your choice. You can click here to get three free quotes from local professionals. These quotes include available rebates and tax credits and automatically exclude unqualified contractors. - Negotiate Smartly
Once you've chosen a contractor, use the proven strategies from our guide — How Homeowners Can Negotiate with HVAC Dealers — to get the best possible final price.