Introduction: For operators who work in cold climates, keeping a skid steer productive requires more than a cab heater. The right cutting edges, mounting plates, and durable hardware improve traction, snow clearing, and attachment versatility. Below is a quick comparison of five skid steer attachments that pair well with cab heating solutions for winter operation.
| Product | Type | Key Feature | Brand |
|---|---|---|---|
| H439029 – Heat Treated Skid Steer Cutting Edge | Cutting Edge Blade | Heat Treated Blade With Hardware | Digger Supply |
| Digger Supply 6718006 Cutting Edge | Cutting Edge Blade | Fits Various Bobcat Buckets | Digger Supply |
| KV12758HT Bolt On Cutting Edge | Cutting Edge Blade | Fits John Deere Models, 8 Bolt | Digger Supply |
| KV17819HT Bolt On Cutting Edge | Cutting Edge Blade | 6 Bolt, Heat Treated | Digger Supply |
| SYNTHACY Skid Steer Mount Plate | Mount Plate With Receiver | 2″ Removable Trailer Hitch Receiver | SYNTHACY |
Content Navigation
- H439029 – Heat Treated Skid Steer Cutting Edge, With Hardware
- Digger Supply 6718006 Heat Treated Skid Steer Cutting Edge With Hardware
- KV12758HT Bolt On Skid Steer Heat Treated Cutting Edge With Hardware
- KV17819HT Bolt On Skid Steer Heat Treated Bucket Cutting Edge
- SYNTHACY 3/8″ Skid Steer Mount Plate With 2″ Removable Trailer Hitch Receiver
- Buying Guide: Choosing Winter-Ready Skid Steer Attachments
H439029 – Heat Treated Skid Steer Cutting Edge, With Hardware
Type: Heat Treated Cutting Edge Blade. Features: Listed as a blade and supplied with hardware. This part is intended for bolt-on installation to compatible skid steer buckets. Heat treatment increases wear resistance, which is important during snow and ice removal where abrasive contact with pavement is common.
Use Case: Best used when replacing worn bucket edges to restore scraping efficiency. It complements in-cab heaters by enabling faster clearing work so operators spend less time idling. Verify bolt pattern and length before installation to ensure compatibility with your bucket.
Digger Supply 6718006 Heat Treated Skid Steer Cutting Edge With Hardware
Type: Heat Treated Cutting Edge for Some Bobcat Buckets. Features: Model listings indicate compatibility with various Bobcat skid steers, 5/8″ thickness, 8″ height, 68″ length, and included hardware. Constructed from steel with aftermarket fitment.
Call 888-896-7031 for Free Local HVAC Quotes – Compare and Save Today!
Use Case: Designed to replace the cutting edge on Bobcat-compatible buckets. The heat treatment improves hardness and lifespan during abrasive winter tasks. Operators pairing this with an effective cab heater will benefit from uninterrupted clearing shifts and reduced downtime for edge replacement.
KV12758HT Bolt On Skid Steer Heat Treated Cutting Edge With Hardware
Type: Bolt-On Heat Treated Cutting Edge. Features: Fits various John Deere skid steer models; listed as 8-bolt configuration, 5/8″ thickness, 6″ height, 78″ length; quality aftermarket steel.
Use Case: Intended for heavy-duty scraping and snow management. The wider length and bolt pattern suit larger buckets. Heat treatment helps resist wear in frozen ground and de-icing abrasive environments. Confirm bucket bolt pattern and hole spacing for proper fitment.
KV17819HT Bolt On Skid Steer Heat Treated Bucket Cutting Edge
Type: 6-Bolt Heat Treated Cutting Edge For John Deere Buckets. Features: 5/8″ thickness, 6″ height, 60″ length; labeled as aftermarket quality steel designed to fit various John Deere models.
Call 888-896-7031 for Free Local HVAC Quotes – Compare and Save Today!
Use Case: Suited for compact bucket setups where a 6-bolt edge is required. Heat treatment and proper steel grade aim to extend service life under winter abrasion. Used with effective operator heating, this edge can reduce time spent on stubborn ice and compacted snow.
SYNTHACY 3/8″ Skid Steer Mount Plate With 2″ Removable Trailer Hitch Receiver
Type: Skid Steer Mount Plate With Removable Receiver. Features: Grade 50 heavy-duty steel, powder-coated finish, 3/8″ thickness, removable 2″ trailer receiver, up to 3,000 lbs pulling force, compatible with 44″ interior width quick-attach systems.
Use Case: Adds towing and hitch versatility to loaders and tractors. In winter, this plate can support attachments such as tow-behind salt spreaders or sled-mounted heaters when an integrated towing point is needed. The durable finish helps resist corrosion from de-icing chemicals and wet conditions.
Buying Guide: Choosing Winter-Ready Skid Steer Attachments
When preparing a skid steer for winter work, consider these key factors to match attachments with cabin heating solutions and job demands.
Tips for Getting the Best HVAC Prices
- Prioritize Quality Over Cost
The most critical factor in any HVAC project is the quality of the installation. Don’t compromise on contractor expertise just to save money. - Check for Rebates
Always research current rebates and incentives — they can significantly reduce your overall cost. - Compare Multiple Quotes
Request at least three estimates before making your choice. You can click here to get three free quotes from local professionals. These quotes include available rebates and tax credits and automatically exclude unqualified contractors. - Negotiate Smartly
Once you've chosen a contractor, use the proven strategies from our guide — How Homeowners Can Negotiate with HVAC Dealers — to get the best possible final price.
Compatibility And Fitment
- Bolt Pattern And Length: Verify bolt spacing, bolt count (6, 8, etc.), thickness, and overall edge length before ordering cutting edges.
- Quick-Attach Dimensions: For mount plates and hitch receivers, confirm quick-attach width and pin spacing to ensure proper engagement.
Material And Treatment
- Heat Treated Steel: Heat treatment increases hardness and wear resistance, beneficial for scraping frozen surfaces.
- Steel Grade And Coating: Higher-grade steel and powder coatings reduce corrosion from salt and moisture in winter environments.
Durability And Maintenance
- Replaceable Edges: Bolt-on cutting edges are easier to replace in the field than welded designs.
- Hardware Included: Choose products that include mounting hardware to simplify installation and reduce downtime.
Operational Considerations
- Task Matching: Select the edge height and thickness that match typical tasks—higher edges for heavy-duty scraping, lower profiles for fine grading.
- Towing And Accessory Capacity: Use mount plates with rated receivers for towing salt spreaders or sleds that aid winter operations.
- Cab Heater Integration: Attachments don’t replace cab comfort but can reduce workload; efficient attachments paired with a reliable heater keep operators productive.
Comparison Perspectives
- Compatibility vs. Universal Fit: Brand-specific edges (Bobcat/John Deere) match OEM bolt patterns, while universal plates aim for a wider fit but require dimension checks.
- Wear Resistance vs. Cost: Heat-treated and thicker edges generally last longer under abrasive winter conditions, which may justify higher initial investment due to reduced replacement frequency.
- Attachment Versatility: Mount plates with removable receivers add multi-season utility—enable towing in winter and other uses in non-winter months.
Installation And Field Service
- Ease Of Replacement: Bolt-on edges should be serviceable with common shop tools; review recommended torque specs and hardware type.
- Spare Hardware: Keep spare bolts and plates available to minimize downtime from lost or damaged fasteners in cold conditions.
Safety And Best Practices
- Secure Mounting: Verify torque on bolts and inspect hardware frequently during winter shifts to prevent loosening from vibration and freeze-thaw cycles.
- Visibility And Controls: Keep cab heater systems maintained to reduce fogging and condensation when working in cold, wet conditions.