The Ultra Aire XT150H price typically ranges from $2,000-$4,500 depending on new versus rebuilt units, installation, and regional service fees. Main drivers are whether the unit is factory-new or remanufactured, required ducting or drain work, and any contractor installation labor. Assumptions: residential whole-house dehumidifier for a 2,000–3,500 sq ft home.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Unit Only | $1,300 | $2,400 | $3,800 | New OEM vs rebuilt |
| Installation | $400 | $1,000 | $2,000 | Simple wall mount to full duct hookup |
| Delivery/Disposal | $0 | $75 | $250 | Local pickup vs white-glove |
| Total Installed | $1,800 | $3,475 | $6,050 | Includes mid-range installation |
Content Navigation
- What Buyers Pay For An Ultra Aire XT150H Unit
- Breakdown Of Major Quote Parts For XT150H Installation
- How Size, Condition, And Installation Specs Change The Quote
- Practical Ways To Lower Your Ultra Aire XT150H Price
- Regional Price Differences And What To Expect
- Common Add-Ons, Prep Work, And Extra Fees That Raise The Final Bill
- Sample Real-World Quotes For Typical Install Scenarios
- Maintenance, Warranty And 5-Year Ownership Costs
What Buyers Pay For An Ultra Aire XT150H Unit
Buyers usually pay $1,300-$3,800 for the XT150H unit itself with an average of about $2,400 for a new OEM unit; rebuilt or remanufactured units commonly fall in the $1,300-$2,000 range. Price differences reflect warranty length, replaced modules, and whether the controller is updated.
Assumptions: XT150H rated for ~150 pints/day at AHAM conditions, standard 120V/240V wiring available, no major duct work.
Breakdown Of Major Quote Parts For XT150H Installation
| Materials | Labor | Equipment | Delivery/Disposal | Permit |
|---|---|---|---|---|
| $1,300-$3,800 (unit) | $400-$1,800 () | $50-$400 (mounts, condensate pump) | $0-$250 | $0-$150 |
The biggest single line item is the unit itself, followed by labor when ducting or a condensate pump is required.
How Size, Condition, And Installation Specs Change The Quote
Capacity and site work alter price: adding duct connections for whole-house distribution adds $600-$1,500; a condensate pump or long drain run adds $150-$600. If the home requires a long run (>25 linear ft) to a floor drain, expect $300-$700 extra.
Other numeric drivers: electrical upgrade to 240V or new circuit costs $250-$900; tight attic access or multi-story carry adds $100-$400 in labor.
Call 888-896-7031 for Free Local HVAC Quotes – Compare and Save Today!
Practical Ways To Lower Your Ultra Aire XT150H Price
Buyers can reduce cost by choosing a rebuilt unit, providing clear access, and combining the install with other HVAC work to lower travel/overhead fees. Selecting local pickup and scheduling off-peak service windows can shave $75-$250 from the total.
Removing the old unit yourself, if safe and legal, often saves $75-$200 versus having the contractor perform disposal.
Regional Price Differences And What To Expect
Labor and markup differences yield regional deltas: coastal urban areas often add 15%-35% to total installed cost versus Midwestern averages. A $3,000 installed price in the Midwest might be $3,450-$4,050 in a high-cost coastal metro.
Rural contractors sometimes charge travel minimums ($75-$200) that offset lower hourly rates.
Common Add-Ons, Prep Work, And Extra Fees That Raise The Final Bill
Frequent add-ons include condensate pumps ($150-$500), insulated duct transitions ($75-$250), electrical panel upgrades ($400-$1,200), and permits ($0-$150). Expect inspection or permit fees when the install involves new wiring or structural penetrations.
Rush installations or weekend service typically cost an extra $150-$500.
Call 888-896-7031 for Free Local HVAC Quotes – Compare and Save Today!
Sample Real-World Quotes For Typical Install Scenarios
| Scenario | Specs | Labor Hours | Per-Unit Rates | Total |
|---|---|---|---|---|
| New OEM unit, basic wall install | XT150H new, no ducting | 2-3 hrs | Unit $2,400; Labor $100/hr | $2,600-$2,900 |
| Rebuilt unit, added condensate pump | Refurbished XT150H, pump, short wire | 3-4 hrs | Unit $1,600; Pump $250 | $2,050-$2,350 |
| Full duct hookup, electrical upgrade | New XT150H, 30 ft duct tie-in, new 240V circuit | 6-10 hrs | Unit $2,800; Labor $100/hr; Elec $600 | $4,400-$6,400 |
These examples show installed totals under realistic labor and accessory assumptions for U.S. homes.
Maintenance, Warranty And 5-Year Ownership Costs
Expect annual maintenance (filter changes, coil checks) of $75-$200 per year and possible parts/service for $150-$600 over five years. A longer OEM warranty reduces expected 5-year repair expense by about $200-$600 versus a short or no-warranty rebuilt unit.
Replacement filters or pads typically cost $25-$75 each depending on media and frequency of change.
Tips for Getting the Best HVAC Prices
- Prioritize Quality Over Cost
The most critical factor in any HVAC project is the quality of the installation. Don’t compromise on contractor expertise just to save money. - Check for Rebates
Always research current rebates and incentives — they can significantly reduce your overall cost. - Compare Multiple Quotes
Request at least three estimates before making your choice. You can click here to get three free quotes from local professionals. These quotes include available rebates and tax credits and automatically exclude unqualified contractors. - Negotiate Smartly
Once you've chosen a contractor, use the proven strategies from our guide — How Homeowners Can Negotiate with HVAC Dealers — to get the best possible final price.