The Lennox CH33 coil price varies by part condition, installer, and home size; most buyers pay between $450 and $1,600 including basic installation. This article shows typical total price ranges, per-unit costs, and the main drivers that affect the final cost for a Lennox CH33 evaporator coil or match-fit replacement.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| CH33 Coil Only (new OEM) | $350 | $700 | $1,100 | Assumptions: common residential A-coil, standard refrigerant. |
| CH33 Coil + Standard Install | $450 | $1,000 | $1,600 | Assumptions: 2-4 hrs, accessible air handler, no cabinet mods. |
| CH33 Coil Rebuild/Refurbished | $200 | $450 | $800 | Assumptions: cleaned, leak-tested, core repair possible. |
| Low-Access or Cabinet Modifications | $650 | $1,400 | $2,200 | Assumptions: extra labor, sheet metal work, brazing. |
Content Navigation
- What Buyers Usually Pay For A Lennox CH33 Coil And Typical Assumptions
- Breakdown Of The Quote: Parts, Labor, and Ancillary Charges
- Key Variables That Change The Final Lennox CH33 Quote
- Practical Ways To Lower Lennox CH33 Replacement Price
- How Prices Vary Across U.S. Regions For A CH33 Coil
- Installation Time, Crew Size, And Typical Labor Rates
- Common Add-Ons, Diagnostic Fees, And Real Quote Examples
What Buyers Usually Pay For A Lennox CH33 Coil And Typical Assumptions
Replacement buyers often see a total project price rather than a part-only price; a standard CH33 coil replacement including labor lands at $450-$1,600 depending on access and refrigerant handling. The average buyer in a suburban market can expect about $700 for the part and $300-$600 for installation and refrigerant service.
Assumptions: residential single-family home, 2-3 ton system, R-410A or R-22 handled per local rules, normal access.
Breakdown Of The Quote: Parts, Labor, and Ancillary Charges
Most invoices split into material, labor, equipment, and disposal; understanding each helps compare quotes. Expect materials to be ~40%-60% of a part+install quote when no major cabinet work is needed.
| Materials | Labor | Equipment | Delivery/Disposal | Contingency |
|---|---|---|---|---|
| $350-$1,100 (coil, gaskets, fittings) | $150-$800 () | $0-$150 (vac pumps, gauges) | $0-$75 (old coil disposal) | $50-$300 for unexpected brazing or parts |
Key Variables That Change The Final Lennox CH33 Quote
Access to the air handler, refrigerant type, cabinet modifications, and whether the match is OEM vs aftermarket change prices significantly. Cabinet modification or deep access adds $300-$1,000; R-22 systems requiring reclamation can add $150-$600.
Two specific thresholds: if the run requires removing the furnace (more than 2 technicians, 4+ hours) expect labor to jump to $600-$1,200; if coil size is >3 tons or non-standard, part price often rises to $900-$1,600.
Call 888-896-7031 for Free Local HVAC Quotes – Compare and Save Today!
Practical Ways To Lower Lennox CH33 Replacement Price
Buyers can reduce cost by scheduling during off-season, preparing access, and choosing OEM vs refurbished based on long-term plans. Doing simple prep work (clearing attic access, removing panels) can shave $75-$200 from labor on install day.
Other levers: get 3 written quotes, accept a refurbished tested core with a short warranty ($200-$450), or bundle coil replacement with routine HVAC service for a contractor discount of 5%-15%.
How Prices Vary Across U.S. Regions For A CH33 Coil
Regional labor and markup differences change total price by roughly ±20%-40% from the national average. Urban Northeast and West Coast areas typically add 15%-35% to average pricing due to higher labor and overhead.
| Region | Typical Total Price | Delta vs Average |
|---|---|---|
| Midwest/Suburban | $600-$1,100 | -10% to +10% |
| Urban Northeast | $800-$1,400 | +15% to +35% |
| South / Rural | $500-$950 | -15% to 0% |
| West Coast | $850-$1,600 | +20% to +40% |
Installation Time, Crew Size, And Typical Labor Rates
A standard CH33 replacement usually takes 2-4 hours with one experienced technician; complex jobs take 4-8+ hours and a second tech. Expect hourly rates of $75-$125 per hour; the labor portion is commonly $150-$800.
Assumptions: includes brazing, vacuuming, leak test, and recharge where needed.
Common Add-Ons, Diagnostic Fees, And Real Quote Examples
Typical add-ons: diagnostic/service fee $75-$150, cabinet modifications $200-$700, refrigerant recovery/recharge $100-$600, and warranty upgrades $50-$200. Ask for a line-item quote to see these costs separated.
Call 888-896-7031 for Free Local HVAC Quotes – Compare and Save Today!
Tips for Getting the Best HVAC Prices
- Prioritize Quality Over Cost
The most critical factor in any HVAC project is the quality of the installation. Don’t compromise on contractor expertise just to save money. - Check for Rebates
Always research current rebates and incentives — they can significantly reduce your overall cost. - Compare Multiple Quotes
Request at least three estimates before making your choice. You can click here to get three free quotes from local professionals. These quotes include available rebates and tax credits and automatically exclude unqualified contractors. - Negotiate Smartly
Once you've chosen a contractor, use the proven strategies from our guide — How Homeowners Can Negotiate with HVAC Dealers — to get the best possible final price.
| Example | Specs | Labor Hours | Per-Unit Rates | Total |
|---|---|---|---|---|
| Example A – Basic | New OEM CH33, 2.5 ton, easy access | 2 hrs | Coil $500, Labor $150 | $650 |
| Example B – Mid | OEM CH33, 3 ton, minor cabinet work, R-410A | 4 hrs | Coil $750, Labor $350, Mod $250 | $1,350 |
| Example C – Complex | Refurbish not possible, 3.5 ton, R-22 reclamation | 6+ hrs, 2 techs | Coil $1,200, Labor $900, Reclaim $400 | $2,500 |