Rheem package unit cost typically runs from small rooftop single-zone units to large commercial RTUs; buyers usually pay based on tonnage, efficiency, and installation complexity, with the price influenced by model series and local labor. This article lists realistic Rheem package unit prices and the main cost drivers to help plan a budget for replacement or new installation.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| 2–3 Ton Residential Package Unit | $2,200 | $3,400 | $5,500 | Assumptions: standard R410A, basic thermostat, residential hook-up |
| 4–5 Ton Commercial Rooftop Unit | $6,000 | $9,500 | $16,000 | Assumptions: mid-efficiency, curb-mounted, standard controls |
| 10–20 Ton Large RTU | $14,000 | $28,000 | $60,000 | Assumptions: multi-zone, economizer options increase price |
Content Navigation
- Typical Total Price For Common Residential Rheem Package Units
- Breakdown Of Materials, Labor, Equipment, And Delivery
- How Tonnage, SEER, And Economizers Change The Final Quote
- Site Conditions That Drive Up Price: Roof Height, Curb, And Access
- Practical Ways To Reduce Rheem Package Unit Price
- Regional Price Differences Across The U.S. Markets
- Common Add-Ons, Removal Fees, And Permit Impacts On Quotes
- Three Real-World Quote Examples With Specs And Labor Hours
Typical Total Price For Common Residential Rheem Package Units
Most homeowners replacing a single-package HVAC unit pay between $2,200 and $5,500 total installed for 2–3 ton Rheem package units; Assumptions: single-story home, simple curb or slab mount, no duct change.
Average installed price for a 3-ton mid-efficiency Rheem package unit is about $3,400 including basic labor and permits.
Breakdown Of Materials, Labor, Equipment, And Delivery
Estimate major line items to compare quotes accurately: equipment, materials, labor, permits, delivery/disposal, and contingency for unforeseen work.
| Materials | Labor | Equipment | Delivery/Disposal | Permits |
|---|---|---|---|---|
| $1,200-$3,800 (unit cost varies by ton & efficiency) | $900-$2,500 (installation labor) | $150-$800 (crane/rigging, curb) | $100-$600 (old unit disposal, lift fees) | $50-$400 (local permit fees) |
Use the table to parse a contractor quote into tangible pieces rather than accepting a single lump sum.
How Tonnage, SEER, And Economizers Change The Final Quote
Tonnage is a primary variable: 1 ton ≈ 12,000 BTU; small residential 2–3 ton units are much cheaper than 10–20 ton commercial RTUs. Numeric thresholds: under 3 tons, 2,200–5,500; 4–6 tons, $6,000–12,000; 10+ tons, $14,000–60,000.
Call 888-896-7031 for Free Local HVAC Quotes – Compare and Save Today!
Adding a high-SEER or variable-speed compressor typically increases equipment price by 15%–40% compared with standard models.
Site Conditions That Drive Up Price: Roof Height, Curb, And Access
Hard-to-access roofs, tall buildings, or nonstandard curbs add crane, rigging, and safety costs. Numeric thresholds: single-story roof typically adds $150–$800; two-story or commercial roof can add $1,000–$5,000 for rigging/crane and traffic control.
If a crane is needed, expect an extra $1,000–$4,000 depending on lift complexity and duration.
Practical Ways To Reduce Rheem Package Unit Price
Buyers can control scope to lower cost: choose a lower SEER within code limits, keep ductwork intact, schedule off-peak replacement, and obtain multiple competitive quotes. Assumptions: comparable warranty and installer credentials.
Removing optional add-ons like economizers or premium controls can cut the equipment price by 10%–30%.
Regional Price Differences Across The U.S. Markets
Labor and permit costs vary: expect 0%–10% below national averages in low-cost Midwest/rural areas and 10%–40% above averages in high-cost coastal metro areas. Example deltas: Northeast/West Coast +15%–40%; Midwest/South Central -5%–10%.
Call 888-896-7031 for Free Local HVAC Quotes – Compare and Save Today!
When budgeting, add a regional premium of 10%–25% in major metro markets to the average national price.
Common Add-Ons, Removal Fees, And Permit Impacts On Quotes
Additional costs often appear for old-unit removal, duct modifications, curb replacement, thermostats, and testing. Typical add-on ranges: thermostat $150–$450, curb/curb adapter $200–$1,200, duct sealing $300–$1,500.
Permit and inspection fees usually add $50–$400, but mandatory electrical or gas updates can add $500–$3,000.
Three Real-World Quote Examples With Specs And Labor Hours
Example A: 3-ton residential Rheem package, basic 13 SEER, curb mount — Equipment $1,800, labor 8–12 hours ($1,000), crane $300, disposal $150 — Total $3,250–$3,500.
Example B: 5-ton commercial rooftop, 14 SEER, curb adapter and thermostat upgrades — Equipment $6,500, labor 16–24 hours ($2,000), crane $1,200, permits $300 — Total $10,000–$12,500.
Example C: 15-ton RTU with economizer and VFDs — Equipment $35,000, labor 80–160 hours ($10,000), rigging $4,000, controls $4,500 — Total $53,500–$65,500.
These examples show how equipment, labor hours, and add-ons combine to create widely different totals for Rheem package units.
Tips for Getting the Best HVAC Prices
- Prioritize Quality Over Cost
The most critical factor in any HVAC project is the quality of the installation. Don’t compromise on contractor expertise just to save money. - Check for Rebates
Always research current rebates and incentives — they can significantly reduce your overall cost. - Compare Multiple Quotes
Request at least three estimates before making your choice. You can click here to get three free quotes from local professionals. These quotes include available rebates and tax credits and automatically exclude unqualified contractors. - Negotiate Smartly
Once you've chosen a contractor, use the proven strategies from our guide — How Homeowners Can Negotiate with HVAC Dealers — to get the best possible final price.