Peerless Combi 160 Price: Purchase, Installation, and Total Cost 2026

The Peerless Combi 160 price typically ranges from the equipment-only cost to a full installed system; buyers pay for the boiler, parts, labor, and often permits or upgrades. Typical total installed cost depends on house size, distribution type, and venting work.

Item	Low	Average	High	Notes
Equipment Only	$1,200	$1,600	$2,200	New Combi 160 boiler unit
Installed (Typical)	$3,500	$5,800	$9,500	Includes parts, labor, basic venting
Replacement/Complex	$6,000	$8,500	$12,000	Boiler + hydronic changes + structural access
Permit & Misc.	$150	$400	$1,200	Local permit, inspection, minor upgrades

Typical Total Price For A Peerless Combi 160 Installed In A Home

Expect a fully installed Peerless Combi 160 to cost $3,500-$9,500 for most U.S. homes, with an average around $5,800.

Assumptions: single-family home, 1–2 zone hydronic distribution, standard 4″ PVC venting, Midwest labor.

Equipment-only pricing is generally $1,200-$2,200 depending on supplier and warranty package. Typical installation scenarios assume direct replacement of an existing boiler or conversion from a boiler with similar piping; conversions from electric or forced-air systems will be higher.

Breakdown Of Parts, Labor, Equipment, And Permits

Breaking the quote into materials, labor, venting, permits, and disposal clarifies where dollars go.

Materials	Labor	Equipment	Permits	Delivery/Disposal
$1,200-$2,200	$1,200-$3,500	$200-$900	$150-$1,200	$75-$600
Boiler, gaskets, piping, valves	Plumbing + HVAC installation hours	Venting kits, pumps, expansion tank	Local building inspection fees	Old boiler disposal, waste

How Specific Home Size And Heat Demand Affect The Final Quote

House size and heating load drive system sizing and installation complexity; examples: under 1,200 sq ft vs. 3,000+ sq ft.

Smaller homes (under 1,200 sq ft) often need minimal pipe runs and smaller distribution, keeping extra parts to $300-$800. Larger homes (2,500–3,500 sq ft) may require additional manifolds, pumps, or parallel boilers—adding $1,000-$4,000. If peak output or multiple zones push system output above a single Combi 160’s capacity, expect supplemental equipment or a second unit.

Another numeric driver: pipe run length—each additional 50 linear ft of new piping can add $150-$400 in materials and labor.

Which Installation Variables Create Big Price Swings

Venting type, conversion from oil, and required gas line upgrades are top price multipliers.

Concrete thresholds: direct-vent PVC via an exterior wall generally adds $200-$700; converting to a power-vent or chimney liner upgrade can be $500-$2,000. Converting from oil to gas often needs a new gas service or meter upgrade—$1,000-$4,000 depending on distance. If electricians are needed for controls or zone wiring, add $200-$1,000.

Practical Ways To Lower Peerless Combi 160 Price Without Sacrificing Safety

Control scope: replace like-for-like, defer noncritical upgrades, and get three detailed quotes that show line-item costs.

Cost-saving actions: keep existing piping layout when possible, choose standard venting over custom chimney work, accept a contractor reuse of existing pumps when appropriate, and schedule in shoulder seasons (spring/fall). Request separate pricing for optional add-ons so buyers can compare core install vs. extras.

Typical Labor Time, Crew Size, And Hourly Rates To Expect

Installation usually requires 6–20 hours of combined plumber/HVAC labor; expect $75-$125 per hour for trades.

A straightforward swap for a single-zone home: 6–10 hours with a 1–2 person crew. Complex conversions, new venting, or adding zones: 12–20 hours with two technicians, plus possible sub-contractor fees for masonry or electric work.

Extra Fees: Removal, Add-Ons, Permits, And Common Unexpected Charges

Budget for disposal, permits, and potential zone piping work—these add $300-$2,500 on many installs.

Typical extra items: old boiler disposal $75-$300, permit and inspection $150-$1,200, adding new zone valves or manifolds $200-$1,000 each, and control upgrades (Wi-Fi thermostats, cascade controls) $150-$900. Rush scheduling or emergency weekend installs can add 25–50% to labor charges.