Buyers should expect the cost to vary by tank type, installation complexity, and local labor. Typical total price for a new 100 gallon propane tank with basic aboveground installation ranges from $700-$2,200 depending on materials, delivery, and labor; fill lines, permits, and site prep add to the final price.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Tank Purchase | $400 | $700 | $1,200 | Steel aboveground vs coated or ASME models |
| Installation Labor | $150 | $450 | $1,000 | Simple placement vs trenching, concrete pad |
| Delivery & Hookup | $50 | $150 | $500 | Depends on access and distance |
| Permits & Inspection | $0 | $75 | $300 | Local code and permit fees vary |
| Total Installed | $700 | $1,450 | $2,200 | Typical range for a standard residential install |
Content Navigation
- What 100-Gallon Propane Tanks Typically Cost Installed
- Cost Breakdown by Materials, Labor, Delivery and Permits
- How Tank Location, Fill-Line Length, and Burial Change the Quote
- Practical Ways To Lower the Price When Buying or Installing a 100-Gallon Tank
- How Regional Differences Affect 100-Gallon Tank Pricing
- Common Add-Ons, Removals, and Site Prep Fees to Budget For
- Three Real-World Quote Examples With Specs and Totals
What 100-Gallon Propane Tanks Typically Cost Installed
A fully installed 100 gallon propane tank usually costs between $700 and $2,200 in the U.S., with the average around $1,450 for an aboveground steel tank on a simple concrete pad. Assumptions: suburban property, 10-20 feet from driveway, standard regulator, basic site prep.
Purchase price alone for a new 100 gallon tank ranges from $400-$1,200 depending on whether the tank is bare steel ($400-$800), factory-painted or coated ($700-$1,000), or an ASME-certified/commercial unit ($900-$1,200). Installation labor and accessories push the total into the ranges above.
Cost Breakdown by Materials, Labor, Delivery and Permits
Materials and labor make up the majority of the quote; delivery and permits are common smaller line items.
| Component | Materials | Labor | Delivery/Disposal | Permits |
|---|---|---|---|---|
| Tank | $400-$1,200 | $0 | $50-$300 | $0 |
| Pad (concrete or block) | $75-$300 | $100-$400 | $0-$50 | $0-$50 |
| Fill & Vapor Lines | $40-$200 | $75-$300 | $0 | $0-$50 |
| Regulator & Accessories | $50-$250 | $50-$200 | $0 | $0 |
| Inspection/Permit | $0 | $0 | $0 | $0-$300 |
How Tank Location, Fill-Line Length, and Burial Change the Quote
Location and line length are large variables: each additional 25-50 linear feet of piping typically adds $75-$250 to labor and materials.
Specific drivers: moving the tank more than 50 feet from the delivery point often requires longer fill and vapor lines, raising cost by $150-$600. Burying a 100 gallon tank or installing a belowground sleeve increases cost dramatically—expect an extra $800-$2,500 depending on excavation, backfill, and traffic-rated concrete.
Call 888-896-7031 for Free Local HVAC Quotes – Compare and Save Today!
Practical Ways To Lower the Price When Buying or Installing a 100-Gallon Tank
Control scope and timing: choose aboveground placement, do basic site prep yourself, and schedule installs in off-peak months to save most on total cost.
Other tactics: accept factory paint instead of premium coatings, reuse existing concrete pads or pads installed by the homeowner, bundle tank purchase with an initial fill, and obtain 3 written quotes. Avoid unnecessary upgrades like remote fill meters unless required by usage or code.
How Regional Differences Affect 100-Gallon Tank Pricing
Expect 10%-25% higher installed prices in the Northeast and West Coast compared with the Midwest and Southeast.
Examples: average installed cost in the Midwest $1,200-$1,600; Northeast $1,400-$2,000; West Coast $1,500-$2,200. Rural locations can lower labor rates but increase delivery fees if supplier distance is large; add $50-$300 for long-haul delivery in remote areas.
Common Add-Ons, Removals, and Site Prep Fees to Budget For
Don’t forget accessory and site fees: concrete pad, protective cage, anti-corrosion coating, old tank removal, and easement work can add $150-$1,500.
Typical add-on prices: concrete pad $175-$600, cage/security $100-$400, anti-corrosion coating $100-$350, old tank removal $75-$400. Minimum service fees or dispatch fees often add $50-$125 to small jobs.
Call 888-896-7031 for Free Local HVAC Quotes – Compare and Save Today!
Three Real-World Quote Examples With Specs and Totals
Concrete examples help translate ranges into likely bills for common scenarios.
Tips for Getting the Best HVAC Prices
- Prioritize Quality Over Cost
The most critical factor in any HVAC project is the quality of the installation. Don’t compromise on contractor expertise just to save money. - Check for Rebates
Always research current rebates and incentives — they can significantly reduce your overall cost. - Compare Multiple Quotes
Request at least three estimates before making your choice. You can click here to get three free quotes from local professionals. These quotes include available rebates and tax credits and automatically exclude unqualified contractors. - Negotiate Smartly
Once you've chosen a contractor, use the proven strategies from our guide — How Homeowners Can Negotiate with HVAC Dealers — to get the best possible final price.
| Scenario | Specs | Labor Hours | Itemized Total |
|---|---|---|---|
| Basic Aboveground | 100 gal steel tank, 10 ft lines, concrete pad | 4 hrs | $700-$950 |
| Standard Install | 100 gal painted tank, 25 ft run, regulator, permit | 6 hrs | $1,200-$1,600 |
| Remote/Rugged Site | 100 gal coated tank, 75 ft run, trenching, permit, removal | 10 hrs | $1,800-$2,500 |