Ultra Aire Dehumidifier Price: What Buyers Pay for Models and Installation 2026

Buyers typically pay $800-$4,500 for Ultra Aire dehumidifiers depending on model size and whether professional installation is required; whole-house systems with controls and ducting are the most expensive. This article lists Ultra Aire dehumidifier price ranges, installation assumptions, and the main drivers that change a final quote.

Item	Low	Average	High	Notes
Small Portable Model	$800	$1,100	$1,600	300–600 pints/day equivalent, no ducting
Mid-Size Whole-House	$1,500	$2,500	$3,500	1,000–1,500 cfm, basic controls
Large Commercial/Multizone	$2,800	$3,800	$4,500	High-capacity units, multiple humidistats
Installation Only	$400	$900	$1,800	Includes ducting, controls, condensate routing

Total Price For Ultra Aire Whole-House Dehumidifiers

Typical total price for a whole-house Ultra Aire dehumidifier ranges from $1,500-$3,500 installed for a 2,000–3,000 sq ft home with standard duct access. A common mid-range job is $2,200-$2,800 including unit, basic control, and 2–4 hours of HVAC labor.

Assumptions: Midwest labor rates, single-story or attic access, standard electrical circuit available.

Parts, Labor, Equipment, Delivery: How Quotes Break Down

Materials	Labor	Equipment	Delivery/Disposal	Permits
$900-$3,400 (unit + controls)	$400-$1,200 ()	$0-$300 (lift, ladders)	$0-$150	$0-$150 (local)

Materials (the Ultra Aire unit and control kit) are usually 60–80% of the hardware portion of the quote.

How Capacity, Duct Runs, And Energy Efficiency Shift Price

Capacity measured in pints/day and CFM is the primary variable: small units (300–700 pints/day) cost $800-$1,600, mid units (800–1,500 pints/day) cost $1,500-$3,000, and commercial units (>1,800 pints/day) cost $2,800-$4,500. Long duct runs or multiple branches that require new plenums or extended controls can add $300-$1,200.

Thresholds: >1,200 pints/day usually needs 2+ technicians; duct run >25 linear ft often triggers extra labor.

Ways To Lower Ultra Aire Dehumidifier Cost Before Buying

Choose a correctly sized unit rather than oversizing, schedule installation in shoulder seasons, and provide clear access to the HVAC cabinet to reduce labor time. Prepping the site (clearing attic space, providing a dedicated 120/240V circuit) can cut installers’ time and save $100-$500.

Consider: Repairing an existing unit’s controls may be cheaper than full replacement if capacity is adequate.

How Prices Vary Across U.S. Regions And Climate Zones

Regionally, coastal urban areas and the Northeast run 10–25% higher than the national average; the Midwest and South are typically 5–15% below coastal rates. A $2,500 mid-range installed price in the Midwest can be $2,800-$3,100 in a coastal metro area.

Example: Urban labor premium ≈ +15%; rural remote jobs may carry travel fees of $100-$300.

Typical Installation Time, Crew Size, And Hourly Rates

Install time for a residential Ultra Aire whole-house unit is usually 3–8 hours with a 1–2 person crew; HVAC techs bill $75-$125 per hour each. Expect $400-$1,200 in labor charges depending on crew size and complexity.

Real-World Quote Examples With Specs And Totals

Scenario	Unit Spec	Labor	Total
Basement Whole-Home	Ultra Aire mid 1,000 pints/day, basic humidistat	3 hrs, 1 tech @ $90/hr = $270	$1,900-$2,300
Attic Mount For 2,800 sq ft	Ultra Aire 1,500 pints/day, control board, condensate pump	6 hrs, 2 techs @ $95/hr = $1,140	$3,200-$3,800
Commercial Multizone	Ultra Aire high-capacity, multiple sensors	8–12 hrs, 2 techs = $1,400-$2,400	$4,000-$4,500

These examples show how labor and add-ons like pumps or extra sensors push the total from a basic supply-only price to a fully operational installed system.