American Standard Allegiance 13 Price: Typical Installed Cost Range 2026

The American Standard Allegiance 13 price usually refers to a 13-SEER central air conditioner condenser and the installed cost for a typical U.S. home. Buyers commonly pay anywhere from a low of $2,200 to a high near $4,500 for system replacement; major drivers are tonnage, existing ductwork, and regional labor rates.

Item	Low	Average	High	Notes
Complete Installed System (2.5-3 ton)	$2,200	$3,200	$4,500	Assumptions: Single-family home, existing compatible coil, suburban Midwest labor.
Outdoor Condenser Unit Only	$800	$1,100	$1,600	Unit price varies by tonnage 1.5-5 ton
Per Ton Installed	$1,000	$1,300	$1,800	Includes materials and labor

Installed Price For a 2.5–3 Ton Allegiance 13 System

Typical full replacement for a 2.5–3 ton Allegiance 13 condensing unit plus matched coil and standard installation runs $2,200-$4,500 depending on site conditions.

The average homeowner pays about $3,200 for a straightforward swap with existing compatible equipment.

Assumptions: standard single-story home, minimal duct modification, mid-range contractors.

Breakdown Of Parts, Labor, and Fees In A Quote

Materials	Labor	Equipment	Permits	Delivery/Disposal
$800-$1,600 (condenser, coil, refrigerant)	$500-$1,200 ()	$0-$300 (lift, rigging)	$50-$300	$150-$500

Materials and labor typically make up 85% of the total installed price, with materials usually being the larger single line item.

How Tonnage, Coil Compatibility, And SEER Affect The Final Price

Unit capacity and matching indoor coil matter: 1.5–2 ton units cost about $1,000-$1,400 installed; 2.5–3 ton $2,200-$3,500 installed; 4–5 ton $3,500-$4,500+ installed.

Mismatched or incompatible indoor coils can add $300-$900 for a replacement or require a full air handler swap costing $1,200-$3,000 extra.

SEER is fixed at 13 for this model; higher-efficiency upgrades (14-16+ SEER) increase unit cost by roughly 10%-40% depending on brand and model.

Practical Ways To Lower The Allegiance 13 Installed Price

Keep existing compatible indoor coil, schedule replacement off-peak, get 3 written quotes, and bundle with furnace or duct repairs to negotiate better contractor pricing.

Opting for a straight like-for-like condenser swap (same tonnage and coil) is the single most reliable way to avoid extra charges.

Regional Price Differences And What To Expect In Urban Vs Rural Markets

Prices vary by region: Northeast and West Coast typically run 10%-25% above Midwest averages; rural areas may incur travel or minimum charges adding $100-$400.

Region	Average Installed Range	Delta vs Midwest
Midwest	$2,200-$3,400	—
Northeast	$2,600-$4,000	+15%-25%
West Coast	$2,800-$4,500	+20%-30%
Rural/Remote	$2,400-$4,200	Travel/minimums +$100-$400

Expect to pay more in high-cost labor markets and where utility efficiency regulations or code requirements add work.

Installation Time, Crew Size, And Typical Labor Rates

Standard swap takes 4–8 hours with a 2-person crew; complex installs (coil swap, line-set replacement, duct work) take 10–16 hours.

Typical labor rates range $75-$125 per hour and a full-install labor charge is commonly $500-$1,200.

Assumptions: average crew efficiency, normal access, no structural modifications.

Sample Real-World Quotes For Allegiance 13 Replacements

Scenario	Specs	Labor Hours	Parts/Unit	Total
Budget swap	2.5 ton, like-for-like coil	6	$1,000	$2,200
Typical replacement	3 ton, matched coil, minor refrigerant line work	8	$1,200	$3,200
Complex replace	4 ton, coil replacement, duct tweaks	12	$1,600	$4,400

These examples reflect common permutations that produce the low-average-high ranges buyers see in real quotes.