The ASX13 air conditioner price varies widely by equipment type and installation complexity; buyers typically pay between $900 and $6,000 total depending on whether they buy a single outdoor unit, a ductless mini-split, or a full central replacement. Major cost drivers are tonnage, line-set/run length, electrical upgrades, and whether the job requires ductwork or permits.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| ASX13 Unit Only | $700 | $1,400 | $2,200 | Single-zone outdoor or condensing unit, 1-1.5 ton |
| Installed Mini-Split (single) | $900 | $2,200 | $4,000 | Includes indoor head, line set up to 25 ft |
| Central System Replacement | $2,000 | $3,800 | $6,000 | Includes evaporator coil, condenser, basic duct hookup |
| Removal / Disposal | $75 | $200 | $500 | Depends on refrigerant recovery and accessibility |
Content Navigation
- Typical Total Price For An ASX13 Single-Zone Installation
- Breakdown Of Major Quote Components For ASX13 Jobs
- Which Specs and Site Conditions Raise Or Lower The Final Quote
- Practical Ways To Lower The ASX13 Price Without Sacrificing Function
- How Regional Markets Change ASX13 Pricing
- Installation Time, Crew Size, And Typical Hourly Rates
- Common Add-Ons, Removal Fees, And Permits That Increase The Quote
- Three Real-World Quote Examples For Budgeting
Typical Total Price For An ASX13 Single-Zone Installation
Assumptions: Average U.S. suburban job, 1.5-ton capacity, up to 25 ft line set, no major electrical upgrades.
Buyers installing an ASX13 single-zone ductless system usually pay about $900-$4,000 total, with an average around $2,200 including parts and labor. Typical installed price combines the unit cost ($700-$2,200) plus labor ($300-$1,800) and modest materials.
Breakdown Of Major Quote Components For ASX13 Jobs
Assumptions: Midwest labor rates, standard mounting, easy access.
| Materials | Labor | Equipment | Permits | Delivery/Disposal |
|---|---|---|---|---|
| $700-$2,200 (unit, line set, fittings) | $300-$1,800 () | $0-$350 (lift, scaffold) | $0-$300 (local) | $75-$500 (refrigerant recovery, haul) |
Materials and labor together typically represent 80%-90% of the final invoice for a straightforward ASX13 install.
Which Specs and Site Conditions Raise Or Lower The Final Quote
Long line-set runs increase cost: expect a $150-$500 surcharge for 26-50 ft and $500-$1,200 for runs over 50 ft. Electrical upgrades such as a new 240V circuit or service panel work add $400-$2,000 depending on capacity needed.
Call 888-896-7031 for Free Local HVAC Quotes – Compare and Save Today!
Other strong variables: tonnage (1.0 ton vs 2.0 ton changes unit price by $300-$900), roof/second-floor installs (adds $200-$800), and required ductwork or coil replacement for central systems ($1,000-$3,000 extra).
Practical Ways To Lower The ASX13 Price Without Sacrificing Function
Compare at least three itemized quotes and request line-item pricing for labor vs parts. Choosing standard single-zone heads instead of premium low-profile or ducted indoor units can cut the equipment bill by 15%-35%.
Other cost controls: schedule work off-peak (fall or spring) to avoid rush premiums, pre-clear access and remove obstacles to reduce labor time, and keep the line-set length under 25 ft when possible.
How Regional Markets Change ASX13 Pricing
Expect regional deltas: Urban West Coast and Northeast rates are typically 10%-25% higher than Midwest prices; rural areas may be 5%-15% lower but have higher travel fees. For budgeting, add 15% in high-cost metro areas and subtract 10% in lower-cost rural markets.
| Region | Low | Average | High |
|---|---|---|---|
| Midwest | $900 | $2,000 | $4,000 |
| West Coast / Northeast | $1,050 | $2,300 | $4,800 |
| Rural / Small Town | $800 | $1,800 | $3,600 |
Installation Time, Crew Size, And Typical Hourly Rates
Most single-zone ASX13 installs take 2-8 hours with a 1-2 person crew; central system replacements run 6-16 hours and may need a 2-3 person crew. Local HVAC tech rates usually range $75-$125 per hour.
Call 888-896-7031 for Free Local HVAC Quotes – Compare and Save Today!
Common Add-Ons, Removal Fees, And Permits That Increase The Quote
Removal and refrigerant recovery typically cost $75-$500 based on accessibility and whether the refrigerant requires special handling. Permit and inspection fees range $0-$300; neglecting permits risks rework costs of $500-$2,000.
| Add-On | Typical Range | When Charged |
|---|---|---|
| Refrigerant Recovery | $75-$300 | Replacing an old unit or disposing of line |
| Electrical Upgrade | $400-$2,000 | New circuit or panel work required |
| Duct Modifications | $500-$3,000 | Central system needing coil or duct resizing |
Three Real-World Quote Examples For Budgeting
Example A: Single-zone ASX13, 1.25 ton, 15 ft line, ground-mount: $900-$1,200 total; 3-4 hours, 1 tech. Good for simple garage or small condo installs.
Example B: Single-zone, 1.5 ton, 35 ft line, second-floor indoor head: $2,200-$3,200; 6-8 hours, 2 techs, includes $350 line-set surcharge.
Example C: Central system swap (coil + ASX13 condensing unit), 2-ton, new disconnect and thermostat: $3,500-$6,000; 10-14 hours, 2-3 techs, includes duct sealing and minor panel work.
Tips for Getting the Best HVAC Prices
- Prioritize Quality Over Cost
The most critical factor in any HVAC project is the quality of the installation. Don’t compromise on contractor expertise just to save money. - Check for Rebates
Always research current rebates and incentives — they can significantly reduce your overall cost. - Compare Multiple Quotes
Request at least three estimates before making your choice. You can click here to get three free quotes from local professionals. These quotes include available rebates and tax credits and automatically exclude unqualified contractors. - Negotiate Smartly
Once you've chosen a contractor, use the proven strategies from our guide — How Homeowners Can Negotiate with HVAC Dealers — to get the best possible final price.