The Comfort 13 central air conditioner 24ABB3 price varies by unit size, installation complexity, and region; buyers typically pay between $2,200 and $6,800 for a complete installed system. Assumptions: 2-3 ton replacement, existing compatible ducts, standard single-family home, Midwest labor.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| 24ABB3 Unit Only | $900 | $1,350 | $1,900 | Per condenser unit; excludes coil, TXV, labor |
| Complete Installation (2-3 ton) | $2,200 | $4,300 | $6,800 | Includes labor, basic hookup, refrigerant, minor duct sealing |
| Duct Repair / Upgrade | $400 | $1,600 | $4,500 | Depends on leakage, access, and required rewrites |
| Permits & Disposal | $75 | $225 | $600 | Local permit and refrigerant disposal fees |
Content Navigation
- Typical Installed Price For a 2-3 Ton Comfort 13 24ABB3 System
- Price Components: Materials, Labor, Equipment, Permits
- How Unit Size, SEER, and Duct Condition Change the Final Quote
- Practical Ways To Lower the Price on a 24ABB3 Installation
- Regional Price Differences Across the U.S. Market
- Typical Labor Time, Crew Size, and Hourly Rates For Install
- Common Add-Ons, Permit Fees, and Unexpected Charges
- Three Real-World Quote Examples With Specs and Costs
Typical Installed Price For a 2-3 Ton Comfort 13 24ABB3 System
Most U.S. homeowners replacing a like-for-like 2-3 ton unit should budget $2,200-$6,800 total for the 24ABB3 installed.
Unit-only pricing: $900-$1,900 (model variations and dealer markup). Installed total assumes 2.0–3.5 ton capacity, 13 SEER level, standard coil and TXV, 1-2 day labor, and normal access.
Assumptions: average-rated home, existing matched indoor coil or compatible AHU, no major ductwork changes.
Price Components: Materials, Labor, Equipment, Permits
Installation quotes break down into equipment, materials, labor, disposal, and permit fees—each can swing the final price by 10-40%.
| Materials | Labor | Equipment | Permits | Delivery/Disposal |
|---|---|---|---|---|
| $900-$1,900 (condenser, parts) | $600-$2,500 (tech hours × rate) | $0-$350 (lift, crane rental) | $75-$600 (local) | $50-$300 (old unit disposals) |
Call 888-896-7031 for Free Local HVAC Quotes – Compare and Save Today!
How Unit Size, SEER, and Duct Condition Change the Final Quote
Two major variables—tonnage and ductwork condition—drive the largest price jumps; moving from 2.0 to 3.5 tons typically adds $700-$1,800.
SEER: 13 SEER models are lower-cost; upgrading to 14–16 SEER can add $800-$2,200. Ducts: minor sealing $400-$1,200; major rebuilds $2,000-$4,500. Long refrigerant runs over 50 ft can add $200-$800 and may require larger line sets.
Practical Ways To Lower the Price on a 24ABB3 Installation
Control total cost by matching capacity to load, scheduling in shoulder seasons, and signing a simple installation scope that excludes optional upgrades.
Compare three written quotes, accept a mid-range warranty, do minor prep work (clear access, remove obstacles), and keep optional add-ons (smart thermostats, UV lights) out of the base bid to reduce sticker shock.
Regional Price Differences Across the U.S. Market
Expect 10%-30% higher installed prices in coastal metro areas and Alaska/Hawaii versus the national Midwest average.
Example deltas: Northeast/West Coast: +15% to +30%; Southeast: +5% to +15%; Rural Midwest: -5% to -15%. These percentages apply mainly to labor and overhead portions, not manufacturer list price for the unit.
Call 888-896-7031 for Free Local HVAC Quotes – Compare and Save Today!
Typical Labor Time, Crew Size, and Hourly Rates For Install
A standard Comfort 13 swap usually takes 6-12 hours with a two-person crew; plan labor rates of $75-$125 per hour.
Simple swap: 6-8 hours (two techs) = $900-$2,000 labor. Complex replacement (coil change, duct access): 10-20 hours = $1,500-$3,000 labor. Emergency or weekend service adds 10%-50% to hourly rates.
Common Add-Ons, Permit Fees, and Unexpected Charges
Budget for possible add-ons: new evaporator coil ($400-$1,200), TXV or metering device ($75-$250), additional refrigerant $60-$180 per pound if top-off required.
| Item | Typical Fee | When Charged |
|---|---|---|
| Evaporator Coil | $400-$1,200 | When indoor coil incompatible or leaking |
| Line Set Replacement | $150-$650 | Corroded or wrong-size existing lines |
| Permit | $75-$600 | Municipal code requirements |
| Refrigerant Recovery/Disposal | $50-$200 | Required when removing old unit |
Three Real-World Quote Examples With Specs and Costs
Concrete quotes help compare what different scenarios cost for a 24ABB3 install.
| Scenario | Specs | Labor Hours | Unit+Materials | Total |
|---|---|---|---|---|
| Budget Swap | 2.0 ton, like-for-like, working ducts | 6 hrs | $1,050 | $2,200 |
| Average Replacement | 3.0 ton, coil change, minor sealing | 12 hrs | $1,450 | $4,300 |
| Complex Install | 3.5 ton, new coils, major ductwork | 20 hrs | $2,300 | $6,800 |
Assumptions: quoted totals include labor, basic materials, standard 13 SEER Comfort 24ABB3 condenser, and local permit/disposal where required.
Tips for Getting the Best HVAC Prices
- Prioritize Quality Over Cost
The most critical factor in any HVAC project is the quality of the installation. Don’t compromise on contractor expertise just to save money. - Check for Rebates
Always research current rebates and incentives — they can significantly reduce your overall cost. - Compare Multiple Quotes
Request at least three estimates before making your choice. You can click here to get three free quotes from local professionals. These quotes include available rebates and tax credits and automatically exclude unqualified contractors. - Negotiate Smartly
Once you've chosen a contractor, use the proven strategies from our guide — How Homeowners Can Negotiate with HVAC Dealers — to get the best possible final price.