The NTI FTVN 110 is a 110,000 BTU wall-hung condensing gas boiler; buyers usually ask about the price and installation expense. Typical total cost depends on unit price, venting and controls, labor, and regional rates for HVAC contractors.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Unit Only | $3,000 | $3,800 | $4,500 | Assumptions: new unit, standard warranty, single-phase gas |
| Installation | $2,500 | $4,500 | $6,000 | Assumptions: 4-10 hours labor, simple venting, existing piping compatible |
| Total Installed | $5,500 | $8,300 | $10,500 | Assumptions: residential retrofit, accessible location |
| Per 1,000 BTU (input) | $27 | $38 | $48 | Assumptions: compares unit + install per kBTU input (110 kBTU) |
Content Navigation
- What Buyers Pay For An NTI FTVN 110 Installed In A Typical Home
- Breakdown Of Major Quote Components For The NTI FTVN 110
- How Venting, Controls, And Fuel Type Drive The Final Price
- Specific Variables That Change The NTI FTVN 110 Quote
- Practical Ways To Reduce NTI FTVN 110 Price Without Sacrificing Safety
- Regional Price Differences For The NTI FTVN 110 Across The U.S.
- Real-World Quote Examples For NTI FTVN 110 Installs
- Typical Installation Time, Crew Size, And Labor Rates To Expect
What Buyers Pay For An NTI FTVN 110 Installed In A Typical Home
Most U.S. homeowners pay between $5,500 and $10,500 to replace an existing boiler with an NTI FTVN 110 including parts and labor.
Unit-only pricing ranges $3,000-$4,500 depending on distributor margins, warranty length, and dealer markups. Installation adds $2,500-$6,000 for labor, piping modifications, venting, controls, and startup testing.
Assumptions: Midwest labor rates, typical single-family home, standard 110k BTU demand, natural gas available.
Breakdown Of Major Quote Components For The NTI FTVN 110
A realistic installer quote separates the unit, materials, labor, venting, and disposal so buyers can compare line items.
| Materials | Labor | Equipment | Permits | Delivery/Disposal |
|---|---|---|---|---|
| $400-$1,200 (piping, controls, isolation valves) | $1,200-$3,800 () | $300-$1,200 (venting kit, condensate pump) | $75-$400 | $150-$400 (old boiler removal) |
How Venting, Controls, And Fuel Type Drive The Final Price
Venting choice and adding advanced controls are the two fastest ways the quote moves from average to high.
Call 888-896-7031 for Free Local HVAC Quotes – Compare and Save Today!
Direct-vent PVC can add $300-$800; stainless concentric or long-through-roof runs add $800-$2,500. Upgrading to outdoor reset controls, Wi‑Fi thermostats, or cascade controls adds $300-$1,200 per device or zone.
Assumptions: vent lengths under 20 ft = lower range; >20 ft or rooftop terminations = higher range.
Specific Variables That Change The NTI FTVN 110 Quote
Two measurable variables have outsized impact: vent run length and number of heating zones.
- Venting run length: 0-20 ft = add $300-$800, 20-50 ft = add $800-$2,000, rooftop or chase = add $1,500-$2,500.
- Zones and controls: single zone = $300-$800, 2-4 zones = $800-$2,000, 5+ zones or cascade with multiple boilers = $3,000+.
Practical Ways To Reduce NTI FTVN 110 Price Without Sacrificing Safety
Control scope, prep the site, and get multiple detailed bids to lower total installed cost.
- Keep the existing piping layout and reuse compatible valves to save $500-$1,500.
- Schedule installation in shoulder seasons to avoid rush premiums; peak winter replacements can add 15%-30% to labor costs.
- Buy the boiler through a dealer that provides a clear parts-only price and compare with installer-supplied unit prices.
- Opt for standard venting routing instead of custom roof caps when code allows.
Regional Price Differences For The NTI FTVN 110 Across The U.S.
Labor and permit variations typically make Northeast and West Coast installs 10%-25% more expensive than Midwest or South installs.
| Region | Typical Installed Range | Price Delta vs. National Average |
|---|---|---|
| Midwest | $5,200-$8,500 | -5% to -15% |
| South | $5,000-$8,200 | -10% to -20% |
| Northeast | $6,200-$10,800 | +5% to +25% |
| West Coast | $6,000-$11,000 | +5% to +25% |
Real-World Quote Examples For NTI FTVN 110 Installs
Three sample quotes illustrate how specs and site conditions create wide totals.
Call 888-896-7031 for Free Local HVAC Quotes – Compare and Save Today!
| Scenario | Specs | Labor Hours | Total |
|---|---|---|---|
| Simple Retrofit | Unit $3,200; reuse existing PVC vent; 1 zone | 6-8 hours | $5,500 |
| Standard Replacement | Unit $3,800; new CPVC vent 25 ft; add outdoor reset | 8-12 hours | $8,400 |
| Complex Upgrade | Unit $4,200; stainless vent rooftop; 3 zones; new pump | 12-20 hours | $10,400 |
Typical Installation Time, Crew Size, And Labor Rates To Expect
Install time and crew size affect labor line items and scheduling availability.
Most installs take 6-20 hours depending on complexity. Typical crews are 1-2 certified HVAC techs. Hourly rates range $75-$125 per hour; specialty work (roof access, high-rise) may be $125-$200 per hour.
Assumptions: includes startup, combustion testing, and code-compliant flue terminations.
Tips for Getting the Best HVAC Prices
- Prioritize Quality Over Cost
The most critical factor in any HVAC project is the quality of the installation. Don’t compromise on contractor expertise just to save money. - Check for Rebates
Always research current rebates and incentives — they can significantly reduce your overall cost. - Compare Multiple Quotes
Request at least three estimates before making your choice. You can click here to get three free quotes from local professionals. These quotes include available rebates and tax credits and automatically exclude unqualified contractors. - Negotiate Smartly
Once you've chosen a contractor, use the proven strategies from our guide — How Homeowners Can Negotiate with HVAC Dealers — to get the best possible final price.